Windows 10: SFC some corrupt files can not be fixed Solved

Page 19 of 21 FirstFirst ... 91718192021 LastLast
  1.    03 Dec 2015 #181

    Just an update, on my system running the 353.82 drive, which was running fine I installed 359.0 and 359.06. Both drivers resulted in the SFC errors you are seeing.

    Possibly, the way the driver files are checked is different from earlier version of Windows and since Microsoft has not yet allowed the Update process to go to these new drivers, SFC and DISM cannot find information on the Microsoft server to correct the error.

    I am running the new drivers and they seem to be running fine. If I want to stop the SFC errors, I will probably have to revert to the current Windows Update version of the Nvidia driver.

    When I did the upgrade, the opencl.dll ~26 K file was replaced by one that was around 103 K.
      My ComputerSystem Spec


  2. Posts : 41
    Microsoft Windows 10 Enterprise 64-bit 10586 Multiprocessor Free
       03 Dec 2015 #182

    Would you be kind enough to perform a "winsat formal -restart clean" process for me and see if it finishes?
      My ComputerSystem Spec

  3.    03 Dec 2015 #183

    kevindd992002 said: View Post
    Would you be kind enough to perform a "winsat formal -restart clean" process for me and see if it finishes?
    Yes, it finished. Is there some specific information you need about the run?
      My ComputerSystem Spec


  4. Posts : 41
    Microsoft Windows 10 Enterprise 64-bit 10586 Multiprocessor Free
       03 Dec 2015 #184

    Saltgrass said: View Post
    Yes, it finished. Is there some specific information you need about the run?
    I'm just trying to make sure that this opencl.dll problem is not connected with my winsat problem described here. I've read in some forum that the graphics driver was causing this same problem to him.

    Can you check if you see any similar error in the end of your winsat.log (C:\Windows\Performance\Winsat)? And just to confirm, your system currently has the opencl.dll and you're running Windows 10 TH2, correct?
      My ComputerSystem Spec

  5.    03 Dec 2015 #185

    kevindd992002 said: View Post
    I'm just trying to make sure that this opencl.dll problem is not connected with my winsat problem described here. I've read in some forum that the graphics driver was causing this same problem to him.

    Can you check if you see any similar error in the end of your winsat.log (C:\Windows\Performance\Winsat)? And just to confirm, your system currently has the opencl.dll and you're running Windows 10 TH2, correct?
    Without causing a problem on the thread, I see nothing like you show, but I am not running the Enterprise version.
      My ComputerSystem Spec


  6. Posts : 515
    Windows 10 Pro 64bit; Windows 10 TP; KDE Neon
       22 Dec 2015 #186

    I think that the latest nvidia driver (361.43) has resolved this issue in my system, on Build 11082 only. See here.
      My ComputerSystem Spec


  7. Posts : 3,033
    Windows 10 Pro 64 bit
    Thread Starter
       22 Dec 2015 #187

    Joanne said: View Post
    I think that the latest nvidia driver (361.43) has resolved this issue in my system, on Build 11082 only. See here.
    Thanks Joanne for that update and information, right now i am using Build 10586.36, so i will have to wait and see, thanks again.
      My ComputerSystem Spec

  8.    28 Dec 2015 #188

    I also had same problem Windows 10 ver 1155 - could not get scannow to repair and could not get DISM to work with either install.esd or install.wim from any source or by any method that Brink had graciously supplied. Tried this by topgundcp and it worked perfectly. Was finally able to use DISM and then scannow fixed the rest. Much appreciated topgundcp!
    topgundcp said: View Post
    I got exactly the same problem and here's how I fixed it. Everything was done from desktop.
    1- Create a folder on desktop: mount
    2- Copy install.wim to desktop. (used the ISO downloaded from techbench)

    Open Admin Command prompt, copy/paste each line and run:
    1. Dism /mount-wim /wimFile:%USERPROFILE%\Desktop\install.wim /index:1 /MountDir:%USERPROFILE%\Desktop\mount
    2. Dism /Online /Cleanup-Image /CheckHealth
    3. Dism /Online /Cleanup-Image /RestoreHealth /Source:%USERPROFILE%\Desktop\mount\windows /LimitAccess
    4. Dism /unmount-wim /Mountdir:%USERPROFILE%\Desktop\mount /discard
    5. re-run: sfc /scannow
      My ComputerSystem Spec


  9. Posts : 3,033
    Windows 10 Pro 64 bit
    Thread Starter
       03 Jan 2016 #189

    Now i feel this OpenCL.dll issue is from Windows 10 and possibly just this build 10586.36 of it. Recently i setup an older PC with clean install of Windows 8.1 Pro and put in one of my NVIDIA Graphics card with the newest drivers 361.43 and SFC came up clean, no integrity violations and DISM was fine also. OpenCL.dll was not changed.
      My ComputerSystem Spec


  10. Posts : 30,189
    Windows10Pro 64Bit - Build 14393.1198
       03 Jan 2016 #190

    jds63 said: View Post
    Now i feel this OpenCL.dll issue is from Windows 10 and possibly just this build 10586.36 of it. Recently i setup an older PC with clean install of Windows 8.1 Pro and put in one of my NVIDIA Graphics card with the newest drivers 361.43 and SFC came up clean, no integrity violations and DISM was fine also. OpenCL.dll was not changed.
    No, Our opencl.dll problem happened AFTER the last major update to build 1511, when we were on build 10240 their was no opencl.dll problem, sfc ran fine with no errors.
    The reason your Windows 8.1 Pro has no errors, is because their is no problem with older windows versions This is only a Windows 10 problem AFTER build 10240. Right now if you had the latest Insider build, this problem with Opencl IS FIXED. Which means Microsoft has addressed this problem in the test versions being used by the Insiders now. How long it will take MS to release this update for this problem is anybody's guess? But at least MS has fixed this problem.
      My ComputersSystem Spec


 
Page 19 of 21 FirstFirst ... 91718192021 LastLast

Related Threads
Solved SFC Corrupt Files on CBS.Log in Performance & Maintenance
Trying to run down some error codes in the admin log I decided to run the SFC scan to see if any files were corrupt and many were which were fixed except for 2 and was wondering if anyone here knows how to read and make fixes to the CBS.log, thanks
Solved SFC Corrupt Files in Performance & Maintenance
Windows search doesn't work. I ran SFC /scannow and there is corrupt files, the log is attached.
repairing corrupt files in Performance & Maintenance
After running sfc /scannow on my windows 10 installation I have been advised tthat there are corrupt files. I have viewed the log and would like to know what these messages mean. " 000010fd Warning - Overlap: Duplicate ownership for directory...
Is this possible ? Ran both programs multiple times .. Ran cc cleaner to get rid of bad registry entries . Nothing is working . Used the media creator and burnt a USB stick . Is there a way to fix corruption with this ? The drive letter for the USB...
fix corrupt files in General Support
I apparently got one or some corrupted files during last update... Computer Win 7 Pro works fine but sfc/scannow etc including install repair wont fix.... will Windows 10 install fix these?? thanks toim
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 19:31.
Find Us