Page 2 of 3 FirstFirst 123 LastLast

  1. Joined : Jul 2015
    Posts : 6,890
    Windows 10 Pro
       17 Sep 2015 #11

    MikeLenovo530 said: View Post
    I have the DVD with me, but haven't had a chance to do this yet. Maybe tomorrow.

    I assume I have to do the "scanhealth" before doing "restorehealth", right?
    Nope. restorehealth scans to see what needs to be restored.
      My System SpecsSystem Spec


  2. Joined : Sep 2015
    Posts : 4
    Windows 10 Pro
       19 Sep 2015 #12

    DISM not working


    Chkdsk was not needed as windows had found no errors
    I ran sfc /scannow in an elevated command prompt with the result
    Corrupted files found but cannot repair
    reading CBS.log I found 4 cases of cannot repair al of which contained the similar detail at
    00003335
    000033ba
    000053b5
    000053b8
    all referring to DataOracleClientPerfCounters.......hashmismatch
    I have been have similar problems, here is a resume of what has happens so far.
    The reason for trying to repair is that in spite of following procedures I cannot get AutoPlay to work on this machine which was updated from W7 Pro using Windows update. I had even worse problems with a W7 laptop which I had to revert to W7 and then upgraded using a W10 disc, that now performs perfectly.
    I ran DISM /online /Cleanup-image /scanhealth
    which said repairable
    I then ran restorehealh on it's own and /source:wim:e:\sources\install.wim:1 and the same with/limitaccess

    All returned the error cannot find source file although I had checked that te file was there on the Windows 10 disc created from an ISO file
    After reading "configure a Windows repair Source" I looked at Group policy but within Computer configuration\administrative templates\system Specify setting for optional component installation and component repair did not exist but specify Windows Installation file did and is not configured

    I do wish that I had reverted to 7 in the allowable time and used a disc to upgrade instead of windows update there are no problems on machines where I used this method

    As a matter of interest I do have a Windows old file on a clone of my C drive, can I copy this back and revert even though the month has passed?

    I have in the past completed a Windows 7 install which did not affect existing data & programs, if I recall by using "Upgrade" does anyone know if this is available for Windows 10?
    Last edited by Albyefield; 19 Sep 2015 at 10:36.
      My System SpecsSystem Spec


  3. Joined : Oct 2013
    Penns Forrest
    Posts : 3,506
    Win_8.1-Pro, Win_10.1607-Pro, Mint_17.3
       20 Sep 2015 #13

    Albyefield said: View Post
    Chkdsk was not needed as windows had found no errors
    I ran sfc /scannow in an elevated command prompt with the result
    Corrupted files found but cannot repair
    reading CBS.log I found 4 cases of cannot repair al of which contained the similar detail at
    .....
    As a matter of interest I do have a Windows old file on a clone of my C drive, can I copy this back and revert even though the month has passed?

    I have in the past completed a Windows 7 install which did not affect existing data & programs, if I recall by using "Upgrade" does anyone know if this is available for Windows 10?
    Albyefield, it's better if you create your own thread so questions and answers don't get confused.

    I think you're looking for this option though, try it and if it doesn't help, open a new thread of your own - thanks.

    Refresh Windows 10 - Windows 10 Forums
      My System SpecsSystem Spec


  4. Joined : Sep 2015
    Posts : 4
    Windows 10 Pro
       20 Sep 2015 #14

    My apologies I did think the thread was appropriate, Many thanks for you help.
      My System SpecsSystem Spec


  5. Joined : Nov 2015
    Posts : 10
    Windows 10 Pro 1511
       19 Nov 2015 #15

    I'm on Windows 10 Pro, the November Update, Version 1511, (OS Build 10586.3).


    I was getting the error"0x800f081f the source file could not be found..." over and over again, trying to run "sfc /scannow" and "dism......" commands. I was trying to use the iso I downloaded directly from the Microsoft Upgrade link via the MediaCreationToolx64. No go, time after time, over the span of a couple days. I even re-downloaded a couple times. I even tried tools to convert esd to wim - nada.


    I finally downloaded the 1511 iso from TechBench. I "mounted" the image and ran the following:


    "Dism /Online /Cleanup-Image /RestoreHealth /Source:wim:H:\sources\install.wim:1 /limitaccess"

    (H:\ being my mounted iso drive. I think "LimitAccess" prevents DISM from going online to Windows Update to download the files. Oh! And notice the "/Source:wim:H:....." part in the path. Some websites are omitting that bolded italicized part of the path.)


    Anyway, after downloading and "mounting" the TechBench ".wim" version, everything completed successfully and the component store, etc, was cleaned up nicely. Rebooted and ran "sfc /scannow" again. No integrity errors found.


    Don't know why the download via Microsoft Upgade wouldn't work. And yes, I even tried using the path that would be correct for the "install.esd" in place of ".wim". It just wouldn't work . Only the TechBench iso download worked. I suspect there may be something missing, or some kind of corruption in the Microsoft Upgrade direct iso - don't know, just a guess.


    In any event, Happy Camper now!


    Hope this helps someone.
    Last edited by poud; 19 Nov 2015 at 20:08.
      My System SpecsSystem Spec


  6. Joined : Oct 2015
    Posts : 1,393
    Windows 10 Pro X64
       19 Nov 2015 #16

    Hi,

    Only the TechBench iso download worked. I suspect there may be something missing, or some kind of corruption in the Microsoft Upgrade direct iso - don't know, just a guess.
    Actually, I've noticed the same thing on several installs of Win10. The TechBench iso files work fine whereas the .esd ones are often problematic.
    Same thing when installing using iso files having an install.esd instead of an install.wim. The former often return corruption errors whereas the latter often don't.
    No idea why though, just an observation.

    Cheers,
      My System SpecsSystem Spec


  7. Joined : Jun 2015
    Posts : 1,613
    Windows 3.1 to Windows 10
       20 Nov 2015 #17
      My System SpecsSystem Spec


  8. Joined : Nov 2015
    Posts : 10
    Windows 10 Pro 1511
       20 Nov 2015 #18

    Unfortunately this process did not work for me because it was the SOURCE files used for the repair that were/are corrupt as well - not just the component store.
      My System SpecsSystem Spec


  9. Joined : Jun 2015
    Posts : 1,613
    Windows 3.1 to Windows 10
       20 Nov 2015 #19

    Then you need to Download NEW Windows 10 Setup Media... ie Source
      My System SpecsSystem Spec


  10. Joined : Nov 2015
    Posts : 10
    Windows 10 Pro 1511
       20 Nov 2015 #20

    Kyhi said: View Post
    Then you need to Download NEW Windows 10 Setup Media... ie Source
    With all due respect, did you read my original post? I DID download NEW Windows 10 media, several times. Finally, only the TechBench download would work correctly - not the Microsoft Upgrade download links via the MediaCreationTool.

    I appreciate your input, but there does appear to be something amiss with the primary MS download links. Is why I ended up doing what I did. I have at least 4 iso's I downloaded from Microsoft direct that will not work as the Source for DISM - the only one that does is the TechBench version.
      My System SpecsSystem Spec


 
Page 2 of 3 FirstFirst 123 LastLast


Similar Threads
Thread Forum
AllJoyn: Open source (IoT) gets added to windows 10
Not sure if this has already been posted on the forums, but if you're someone who is intrigued by the Internet of Things then windows 10 might just be the OS for you. ;) Microsofts Windows 10 Includes Smart Home Features
General Support
sfc /scannow cant fix errors dism is unable to find source.
I've been using Microsoft's OSs since dos 6ish and win 3.11. I always adapt early and usually figure the bugs out on my own, this time not so much. So i updated from win 8.1 pro x64 to win 10 pro x64 on day 2 of RTM as soon as I got my invite. I had...
Performance & Maintenance
Solved "Error (0x800F081F) - DISM Unable to find source" & "sfc /scannow"
I have upgraded 5 machines and clean installed 3 machines. Experienced an issue with one machine with continuous corruption problems After the 3rd attempt I discovered that even with a Clean Install of Win 10 I get unrepairable errors - Sorry...
General Support
Microsoft: 'We are going to open-source Windows Live Writer'
Read more: Microsoft: 'We are going to open-source Windows Live Writer'
Windows 10 News
Microsoft: An Open Source Windows Is ‘Definitely Possible’
Read more: Microsoft: An Open Source Windows Is | WIRED
Windows 10 News
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 09:54.
Find Us
Twitter Facebook Google+



Windows 10 Forums