New
#1
Why would a cloned to an ext usb OS only boot in safemode?
A problem many seem to have but nobody an answer.
I cloned an SSD to a USB memory stick but it only boots the cloned OS when starting safe mode.
in normal mode the circles starts spinning and eventually freeze.
The BCD is set correctly, points to the appropriate partitions were \Windows resides and the FAT32 partition where the boot files and UEFI configuration are. Bootice confirms all.
I even took out the original SSD and connected to the same machine via USB. Checked all the settings and BCD still have the same problem.
I tried all of the eight options but only the safe mode variance work.
Option 1 "enable debugging" Starts up but the circles run forever*
Option 2 "boot logging" and all the other options except safe mode hang water rotating circle eventually freezes.*
Talk about going around in circles! Anyone know what the underlying potential configuration issue is?
*One thing I was able to extract is this (excerpt):
BOOTLOG_LOADED \SystemRoot\System32\drivers\pmem.sys
BOOTLOG_LOADED \SystemRoot\System32\Drivers\mup.sys
BOOTLOG_LOADED \SystemRoot\system32\drivers\iorate.sys
BOOTLOG_LOADED \SystemRoot\System32\drivers\hwpolicy.sys
BOOTLOG_LOADED \SystemRoot\System32\drivers\disk.sys
BOOTLOG_NOT_LOADED @oem47.inf,%uimdevicedesc%;UIM Bus Controller
BOOTLOG_NOT_LOADED @hal.inf,%acpi_amd64.devicedesc%;ACPI x64-based PC
BOOTLOG_NOT_LOADED @oem47.inf,%uimdevicedesc%;UIM Bus Controller
BOOTLOG_NOT_LOADED @oem47.inf,%uimdevicedesc%;UIM Bus Controller
BOOTLOG_NOT_LOADED @oem47.inf,%uimdevicedesc%;UIM Bus Controller
BOOTLOG_NOT_LOADED @oem47.inf,%uimdevicedesc%;UIM Bus Controller
BOOTLOG_NOT_LOADED @oem47.inf,%uimdevicedesc%;UIM Bus Controller
BOOTLOG_NOT_LOADED @oem47.inf,%uimdevicedesc%;UIM Bus Controller
BOOTLOG_NOT_LOADED @oem47.inf,%uimdevicedesc%;UIM Bus Controller
BOOTLOG_NOT_LOADED @oem47.inf,%uimdevicedesc%;UIM Bus Controller
BOOTLOG_NOT_LOADED @oem47.inf,%uimdevicedesc%;UIM Bus Controller
BOOTLOG_NOT_LOADED @oem47.inf,%uimdevicedesc%;UIM Bus Controller
BOOTLOG_NOT_LOADED @CPU.inf,%intelppm.devicedesc%;Intel Processor
BOOTLOG_NOT_LOADED @CPU.inf,%intelppm.devicedesc%;Intel Processor
BOOTLOG_NOT_LOADED @CPU.inf,%intelppm.devicedesc%;Intel Processor
BOOTLOG_NOT_LOADED @CPU.inf,%intelppm.devicedesc%;Intel Processor
etc., etc., repetitively thereafter...
Last edited by 3Bit; 23 Aug 2023 at 22:54.