1. Joined : Sep 2015
    Posts : 5
    Windows 10
       02 Sep 2015 #1

    Sfc /scannow


    Hi

    I'm new to the forum

    When running SFC / SCANNOW I get an error message - Can someone help in fixing the issues that it refers to?

    "Windows Resource Protection found corrupt files but was unable to fix some
    of them. Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For
    example C:\Windows\Logs\CBS\CBS.log. Note that logging is currently not
    supported in offline servicing scenarios"
      My System SpecsSystem Spec


  2. Joined : Jun 2015
    UK
    Posts : 1,316
    Windows 10 Home x64 (Laptop), Windows 10 Pro x64 (Desktop)
       02 Sep 2015 #2

    See http://www.eightforums.com/tutorials...ndows-8-a.html and try running Dism /Online /Cleanup-Image /RestoreHealth to see if this solves your problem. Then run SFC /SCANNOW again - you may need to do this times with a full restart between each time SFC is run.
      My System SpecsSystem Spec


  3. Joined : Sep 2015
    Posts : 5
    Windows 10
       02 Sep 2015 #3

    Done this and no progress. I downloaded the Windows Image File onto my F drive and run:

    "DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:F:\Sources\Install.wim:1 /LimitAccess"
    and get the following notification.

    Microsoft Windows [Version 10.0.10240]
    (c) 2015 Microsoft Corporation. All rights reserved.

    C:\WINDOWS\system32>DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:F:\Sources\Install.wim:1 /LimitAccess

    Deployment Image Servicing and Management tool
    Version: 10.0.10240.16384

    Image Version: 10.0.10240.16384

    [=========== 20.0% ]
    Error: 1726

    The remote procedure call failed.

    The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log

    What next ?
      My System SpecsSystem Spec


  4. Joined : Jun 2015
    UK
    Posts : 1,316
    Windows 10 Home x64 (Laptop), Windows 10 Pro x64 (Desktop)
       02 Sep 2015 #4

    I've never had to use the /source flag only the basic Dism /Online /Cleanup-Image /RestoreHealth command. Have you tried this basic command first?

    See also the specific Windows 10 tutorial on this DISM - Repair Windows 10 Image
      My System SpecsSystem Spec


  5. Joined : Sep 2015
    Posts : 5
    Windows 10
       02 Sep 2015 #5

    Done this and no progress. I downloaded the Windows Image File onto my F drive and run:

    "DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:F:\Sources\Install.wim:1 /LimitAccess"
    and get the following notification.

    Microsoft Windows [Version 10.0.10240]
    (c) 2015 Microsoft Corporation. All rights reserved.

    C:\WINDOWS\system32>DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:F:\Sources\Install.wim:1 /LimitAccess

    Deployment Image Servicing and Management tool
    Version: 10.0.10240.16384

    Image Version: 10.0.10240.16384

    [=========== 20.0% ]
    Error: 1726

    The remote procedure call failed.

    The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log

    What next ?
      My System SpecsSystem Spec


  6. Joined : Sep 2015
    Posts : 5
    Windows 10
       02 Sep 2015 #6

    I Tried the above but receive the following error when running:

    C:\Windows\system32>call Dism.exe /online /cleanup-image /restorehealth

    Deployment Image Servicing and Management tool
    Version: 6.3.9600.17031

    Image Version: 6.3.9600.17031

    [===========================80.0%============== ]
    Error: 1726

    The remote procedure call failed.
      My System SpecsSystem Spec


  7. Joined : Aug 2015
    Posts : 123
    Windows 10 Pro 64bit
       03 Sep 2015 #7

    I suspect that a high percentage of those that upgraded from Windows 7 to Windows 10 will get this message about corrupt files. I am OCD about my PC - had a perfectly running Win 7 and after upgrading, scf gave the same errors. Same problem running a USB ISO clean install.

    It's not being reported much on the forums yet as not many people will actually bother to run this command. It drove me nuts and I installed Win 10 from a MS DVD in the end (as I said, I am OCD) and the errors are no more.

    If your issue is like mine, then it is an issue with the initial install - the sfc errors were reported after running the command immediately after the clean install - even before loading any drivers.
      My System SpecsSystem Spec


  8. Joined : Sep 2015
    Posts : 5
    Windows 10
       03 Sep 2015 #8

    I agree... the problem only manifested itself after Windows 10 upgrade from Windows 8

    I used to run SFC / SCANNOW every 3 / 4 months without problem.

    Problems only started after upgrade to Windows 10 - The first issue was Outlook failing to send emails - SFC fixed that... from thereon-in errors have been popping up.

    Microsoft do not accept that the Windows 10 install could have caused the problem saying that the problems 'MUST' have been on my system prior to upgrade!! - However for a one-off fee or annual support payment they will be able to remote into my system and fix all the issues... But they will not tell me how to do it myself
      My System SpecsSystem Spec


  9. Joined : Aug 2015
    Posts : 123
    Windows 10 Pro 64bit
       03 Sep 2015 #9

    Hmmm.... I would be skeptical allowing MS to dig around in my PC remotely. No guarantee that they will be able to fix it either. They might still end up telling you to re-install.

    I don't know if this will work but you have a legal license for your Windows 10 - try obtain a MS DVD matching your version and install that. Just make sure you do not enter any license key from the DVD packaging during the install unless you have actually purchased it. Theoretically this should still activate using your already assigned license key that is registered with MS. I suspect that your troubles will be gone then.

    A clean install using a MS DVD is what sorted me. I must have reinstalled Win 10 pro about 6 times using different USB's and different ISO's (re downloaded 3 times) and could not get away from the issue.
      My System SpecsSystem Spec


 


Similar Threads
Thread Forum
Solved Problems With SFC Scannow
SFC Scannow is throwing up a problem Windows Resource Protection found corrupt files but was unable to fix some of them. Now I've tried to fix them with SFC Fix application but no joy. DISMfile attached.
Performance & Maintenance
SFC /scannow errror
Hi, just wondering if these are anything I should try to fix or if I can just ignore them. When doing a sfc /scannow after it finished it reported this. I'm just trying to get my laptop ready for the upgrade and getting ready to clean it up and make...
Performance & Maintenance
SFC /SCANNOW results
Finally in this build 10049, I can run SFC /SCANNOW completely. I've extracted just the SR results from cbs.log showing repairs, but one did not fix. Has something to do with powershell. I've rebooted and rerun 3 times, the recommended. Any...
General Support
SFC /scannow does not work - what to do??
Greetings. After some troubble with my PC I wanted to restart in safe mode, but it can't do that. Breaks off and write something about a "hard crash", only the taskbar works, and I can also ust winkey+R and start regedit aso. Because of this I...
General Support
Solved SFC Scannow Results
Has anyone else run "sfc /scannow" on their system? I am receiving integrity errors but they don't seem to logged or I can't find them in the usual place.
General Support
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:15.
Find Us
Twitter Facebook Google+



Windows 10 Forums