Problems with the memory instead of a high amount

Page 1 of 2 12 LastLast

  1. Posts : 29
    windows 10
       #1

    Problems with the memory instead of a high amount


    System Version 21H2 (compilation of the system: 19044.2486).

    Hello,
    despite various treatments, Windows Blue Screen 10 continues to exhibit some internal conflict related to memory. Lately it crashes during power-up or there is a blue screen a few seconds after power-up. I have 24 GB RAM and it is new. The old 8GB RAM also experienced problems.

    Changes made to the system:
    Setting a normal startup instead of selective.

    I did "Tips to improve PC performance in Windows":
    - Adjust the appearance and performance of Windows > Advanced - and I assigned the largest drive to the size of the paging file and doubled the size.

    I am a graphic designer and I am working on crashing and breakin files Photoshop, and also I am using Stable Diffusion with --lowvram command to stop crashing itself. I did everything what is possible to set Photoshop for optimal performance.

    What do you recommend, should I buy 64GB RAM or could it be to do with a poor graphics card, or just the system itself has very poor memory management?
      My Computer


  2. Posts : 282
    Windows 10 Pro
       #2

    Please explain why you think it's a memory problem?

    Usually BSODs are hardware or driver related. So, if you recently introduced a piece of hardware or software to the system and now it BSODs, it could be the likely suspect.

    What does the program Whocrashed give you? Resplendence Software - WhoCrashed, automatic crash dump analyzer

    Booting Memtest86 and running four passes (the max I believe) can help tell if memory is at fault. Or even the memory slots themselves or a BIOS/UEFI misconfiguration. If it is memory related perhaps its the timings or the memory profile is not set in BIOS/UEFI.
      My Computer


  3. Posts : 5,336
    Windows 11 Pro 64-bit
       #3

    Find out why you got a Blue Screen of Death (BSOD) error and how to stop it.

      My Computer


  4. Posts : 6,393
    Windows 11 Pro - Windows 7 HP - Lubuntu
       #4

    Ericrivicpic said:
    System Version 21H2 (compilation of the system: 19044.2486).

    Hello,
    despite various treatments, Windows Blue Screen 10 continues to exhibit some internal conflict related to memory. Lately it crashes during power-up or there is a blue screen a few seconds after power-up. I have 24 GB RAM and it is new. The old 8GB RAM also experienced problems.
    If with the new and with the old memory you're having same issue, I would say it is not a memory issue.
    Do you have a hardware monitor to check the temperatures?
    Are you overclocking?
      My Computers


  5. Posts : 29
    windows 10
    Thread Starter
       #5

    What does the program Whocrashed give you? Resplendence Software - WhoCrashed, automatic crash dump analyzer

    It says "Crash dump directories:
    C:\WINDOWS
    C:\WINDOWS\Minidump

    No valid crash dumps have been found on your computer."

    From yesterday I have problems to open System properties. The blue window of the properties opens and close after a second...

    I will try "Configuring your computer for crash dumps manually "

    - - - Updated - - -

    Booting Memtest86 and running four passes (the max I believe) can help tell if memory is at fault. Or even the memory slots themselves or a BIOS/UEFI misconfiguration. If it is memory related perhaps its the timings or the memory profile is not set in BIOS/UEFI.[/QUOTE]

    I've used Memory Diagnostic Tool and it showed that the memory is ok. So as you say it don't have to be a problem with the memory itself but with memory menagement.
      My Computer


  6. Posts : 1,728
    Windows 10 Pro x64 22H2
       #6

    Hello, please follow steps in the tutorial below to share info about your computer:
    BSOD - Posting Instructions
      My Computer


  7. Posts : 29
    windows 10
    Thread Starter
       #7

    Megahertz said:
    If with the new and with the old memory you're having same issue, I would say it is not a memory issue.
    Do you have a hardware monitor to check the temperatures?
    Are you overclocking?
    Problems with the memory instead of a high amount-stabilitytest.pngProblems with the memory instead of a high amount-stabilitytest1.pngProblems with the memory instead of a high amount-stabilitytestfans.pngProblems with the memory instead of a high amount-stabilityteststats.pngProblems with the memory instead of a high amount-stabilitytestvoltages.png
      My Computer


  8. Posts : 6,393
    Windows 11 Pro - Windows 7 HP - Lubuntu
       #8

    I can't trust this data. MB temp 127C? No way.
    12V = 4.56V ?????
    3.3V = 0.96V ?????

    Use Open Hardware Monitor
    Extract to C:\Program Files (x86)\HardwareMonitor and run openhardwaremonitor.exe
    Under options you can set to start with Windows and you can configure what to show in tray and on the gadget. Very good
    All temperatures should be bellow 80C and never above 90C
    Attached Thumbnails Attached Thumbnails Problems with the memory instead of a high amount-hard_mon.jpg   Problems with the memory instead of a high amount-hdmonitor2.jpg  
      My Computers


  9. Posts : 29
    windows 10
    Thread Starter
       #9

    Use Open Hardware Monitor
    Extract to C:\Program Files (x86)\HardwareMonitor and run openhardwaremonitor.exe
    Under options you can set to start with Windows and you can configure what to show in tray and on the gadget. Very good
    All temperatures should be bellow 80C and never above 90C
    Yes it was Everest free and his indications are most likely wrong.

    I did a test in Hardware Monitor with no load and with load: Blender (cycles) + Photoshop + Stable Diffusion and it's very fun.
    Usually when I run some heavy process, the fans spin up and the computer howls. When OHM starts it is silent. Only for a moment the fan sped up, then turned off. Temperatures are pretty decent. I don't know what it is, does the monitor act as an observer and watch over the indications so that they do not exceed the standards ...? Because it seems to force stable work. For a while I thought Photoshop would crash when I clicked on the Text tool, but it did the trick.
    Attached Thumbnails Attached Thumbnails Problems with the memory instead of a high amount-tempunderstress2.jpg   Problems with the memory instead of a high amount-tempunderstress.png  
    Problems with the memory instead of a high amount Attached Files
      My Computer


  10. Posts : 6,393
    Windows 11 Pro - Windows 7 HP - Lubuntu
       #10

    Open Hardware Monitor only collects data, it doesn't act on the control of any hardware device.
    Maybe it was the other monitor (Everest free) that was crashing.
      My Computers


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 10:23.
Find Us




Windows 10 Forums