Page 7 of 30 FirstFirst ... 5678917 ... LastLast
  1.    10 Jan 2016 #61
    Join Date : Jan 2016
    Posts : 23
    windows 10

    Quote Originally Posted by f14tomcat View Post
    I use comm apps and sync, so I did not disable them. I try to just ignore them until MS gets around to addressing them. (somewhere around 2025!) Instead of disabling them in registry (start=4), maybe you could try Manual Start (start=3). Using the registry editor to change the service state Smallvoid.com
    Quote Originally Posted by fdegrove View Post
    Hi,



    I do but I don't think it makes much difference either way.

    That DCOM error regarding "Immersive shell" no longer appeared for me but I should add that I removed the bulk of the apps anyway. I don't know if that's related but it could be.

    Cheers,
    Ok , taken notice about them.

    I wanted to make sure if you guys have this folder and if you can send it to me .

    Does anyone has this file and all the files in the folder ?

    Task Scheduler service found a misconfiguration in the NT TASK\CTF Host definition. Additional Data: Error Value: C:\Users\x7007\AppData\Roaming\Microsoft\Ctfhost\ctfhost.exe.

    I deleted it and if someone can send it so I can put it back, I don't know how it installed or from what.
      My ComputerSystem Spec
  2.    10 Jan 2016 #62
    Join Date : Jul 2015
    Posts : 100
    Dual-boot Win 7 & 10, both Pro 64-bit

    x7007 - I am not a savvy tech like f14tomcat and fdegrove - in fact, I'm only a real estate lawyer -- so please confirm the following before trying:

    Recently, from good advice in this and other forums, I was able to solve a bunch of Win 10 Pro 64-bit problems by running these as a .bat:

    sfc /scannow
    rem Dism /Online /Cleanup-Image /StartComponentCleanup
    Dism /Online /Cleanup-Image /RestoreHealth
    sfc /scannow

    (I don't always actually run the second "rem" line, but I used it recently by removing the "rem" and it helped.)

    But, as I said, double-check the above before using it.
      My ComputerSystem Spec
  3.    10 Jan 2016 #63
    Join Date : Jan 2016
    Posts : 23
    windows 10

    Quote Originally Posted by glnz View Post
    x7007 - I am not a savvy tech like f14tomcat and fdegrove - in fact, I'm only a real estate lawyer -- so please confirm the following before trying:

    Recently, from good advice in this and other forums, I was able to solve a bunch of Win 10 Pro 64-bit problems by running these as a .bat:

    sfc /scannow
    rem Dism /Online /Cleanup-Image /StartComponentCleanup
    Dism /Online /Cleanup-Image /RestoreHealth
    sfc /scannow

    (I don't always actually run the second "rem" line, but I used it recently by removing the "rem" and it helped.)

    But, as I said, double-check the above before using it.
    I think if I run the Scannow it might restore the old permission I change with runtimebroker and immersion shell

    You guys think it's good idea to run this commands ?


    Use Dism /Online /Cleanup-Image followed by these switches:
    • /ScanHealth: This checks for component store corruption and records that corruption to the C:\Windows\Logs\CBS\CBS.log but no corruption is fixed using this switch. This is useful for logging what, if any, corruption exists. Use Dism /Online /Cleanup-Image /ScanHealth. This could take 10-15 minutes.
    • /CheckHealth: This checks to see if a component corruption marker is already present in the registry. This is merely a way to see if corruption currently exists. Think of it as a read-only CHKDSK. Use Dism /Online /Cleanup-Image /CheckHealth. This could take less than a minute.
    • /RestoreHealth: This checks for component store corruption, records the corruption to C:\Windows\Logs\CBS\CBS.log and FIXES the corruption using Windows Update. This operation takes 15 mins or more depending on the level of corruption. Use Dism /Online /Cleanup-Image /RestoreHealth.

    http://www.thewindowsclub.com/compon...-windows-image

    I ran C:\>Dism /Online /Cleanup-Image /ScanHealth

    Deployment Image Servicing and Management tool
    Version: 10.0.10586.0


    Image Version: 10.0.10586.0


    [==========================100.0%==========================]
    No component store corruption detected.
    The operation completed successfully.

    Should I continue with the others ?
      My ComputerSystem Spec
  4.    11 Jan 2016 #64
    Join Date : Jul 2015
    Posts : 3,655
    10 Pro

    Quote Originally Posted by x7007 View Post
    Should I continue with the others ?
    There is no point running any more Dism commands as you've already checked it with /ScanHealth and it found no issues in the component store.

    You could run Sfc /VerifyOnly and this will check the hash of objects you are running against those in the component store (it will not change anything - just give a report). You can then decide if you want to run Sfc /ScanNow. It will not reset (or repair) any permission changes you've made anyway.

    Incidentally for Immersive Shell I have local launch and local activation permissions for Interactive, SYSTEM and Administrators. This is the default and I don't have the problem you describe.
      My ComputerSystem Spec
  5.    11 Jan 2016 #65
    Join Date : Jan 2016
    Posts : 23
    windows 10

    Quote Originally Posted by lx07 View Post
    There is no point running any more Dism commands as you've already checked it with /ScanHealth and it found no issues in the component store.

    You could run Sfc /VerifyOnly and this will check the hash of objects you are running against those in the component store (it will not change anything - just give a report). You can then decide if you want to run Sfc /ScanNow. It will not reset (or repair) any permission changes you've made anyway.

    Incidentally for Immersive Shell I have local launch and local activation permissions for Interactive, SYSTEM and Administrators. This is the default and I don't have the problem you describe.
    Ok about the sfc .
    Why for me the remote is selected too for all of them ?
      My ComputerSystem Spec
  6.    11 Jan 2016 #66
    Join Date : Jul 2015
    Posts : 3,655
    10 Pro

    Quote Originally Posted by x7007 View Post
    Why for me the remote is selected too for all of them ?
    No idea I'm afraid. I did a clean install of 1511 and that is what it came out like.
      My ComputerSystem Spec
  7.    11 Jan 2016 #67
    Join Date : Oct 2015
    Posts : 1,967
    Windows 10 Pro X64

    Hi,

    Task Scheduler service found a misconfiguration in the NT TASK\CTF Host definition. Additional Data: Error Value: C:\Users\x7007\AppData\Roaming\Microsoft\Ctfhost\ctfhost.exe.
    No such folder/file on my system.

    Could be adware though:

    http://www.freefixer.com/library/fil...st.exe-210152/

    Cheers,
      My ComputersSystem Spec
  8.    11 Jan 2016 #68
    Join Date : Oct 2014
    Arnold, MD
    Posts : 27,912
    Triple boot - Win 10 Pro, Win 10 Pro Insider (2) - (and a sprinkling of VMs)

    Quote Originally Posted by glnz View Post
    x7007 - I am not a savvy tech like f14tomcat and fdegrove - in fact, I'm only a real estate lawyer -- so please confirm the following before trying:

    Recently, from good advice in this and other forums, I was able to solve a bunch of Win 10 Pro 64-bit problems by running these as a .bat:

    sfc /scannow
    rem Dism /Online /Cleanup-Image /StartComponentCleanup
    Dism /Online /Cleanup-Image /RestoreHealth
    sfc /scannow

    (I don't always actually run the second "rem" line, but I used it recently by removing the "rem" and it helped.)

    But, as I said, double-check the above before using it.
    This is the correct sequence, and can be Copy/paste (ALL ONE LINE) to Admin Cmd line, don't need a .bat...

    Dism.exe /online /Cleanup-Image /StartComponentCleanup&sfc/scannow&Dism /Online /Cleanup-Image /RestoreHealth&sfc/scannow&pause
      My ComputersSystem Spec
  9.    25 Jan 2016 #69
    Join Date : Jun 2015
    UK
    Posts : 1,893
    Windows 10 Home x64 (Laptop), Windows 10 Pro x64 (Desktop)

    I had this problem on a clean install! I wonder if MS see many errors in their event logs before they issue Windows 10?

    I had the error in post 19 but followed the instructions to bypass it as discussed in the thread.

    On opening DCOM Config, I get 2 messages saying igfxSDK.exe "has the named value AppId, but is not recorded under \\HKEY_CLASSES_ROOT\AppID. Do you wish to record it?". I don't know what this means so I've selected NO so far. Should I select YES?

    I'm also getting the 7031 errors. The guidance on this forum and elsewhere seems to recommend waiting for MS to fix it unless someone knows better?
      My ComputerSystem Spec
  10.    25 Jan 2016 #70
    Join Date : Oct 2014
    Arnold, MD
    Posts : 27,912
    Triple boot - Win 10 Pro, Win 10 Pro Insider (2) - (and a sprinkling of VMs)

    Quote Originally Posted by Steve C View Post
    I had this problem on a clean install! I wonder if MS see many errors in their event logs before they issue Windows 10?

    I had the error in post 19 but followed the instructions to bypass it as discussed in the thread.

    On opening DCOM Config, I get 2 messages saying igfxSDK.exe "has the named value AppId, but is not recorded under \\HKEY_CLASSES_ROOT\AppID. Do you wish to record it?". I don't know what this means so I've selected NO so far. Should I select YES?

    I'm also getting the 7031 errors. The guidance on this forum and elsewhere seems to recommend waiting for MS to fix it unless someone knows better?
    Take a look here. It's an Intel process. DCOM Configuration warning - Microsoft Community
      My ComputersSystem Spec

 
Page 7 of 30 FirstFirst ... 5678917 ... LastLast


Similar Threads
Thread Forum
Event 10016, DistributedCOM
Since upgrading to Windows 10, my error log is flooded with this message. Over 520 incidents in the past week. The instructions provided for that error in Windows 8 do not work with 10, since it is impossible to grant full permission to the...
Performance & Maintenance
Weird event viewer errors
Hello, Event Viewer is showing the following errors: The User Data Storage_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service. The User...
Performance & Maintenance
Event Log 7031 Errors on Shutdown
This appears to be a general issue with windows 10, I always get the following errors on shutdown: The VMware Workstation Server service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000...
General Support
Worried about event viewer errors
hi guys managed to install windows 10 and everything seems to be working great. I looked in event viewer and I'm getting loads of errors, the same over and over. one is that keeps coming up is kernel-power event id 137 The system...
Performance & Maintenance
ESENT errors in my Event Log
On Windows 10 Pro x64 I am getting quite a few ESSENT errors in my Event Log after I start up W10. I see Event ID's 413, 455, 488, and 489. If these are indicative of a problem does anyone know the fix? Thanks
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 20:48.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums