Windows 10: Windows 10 Event ID 10010 and 10016 Errors With DistributedCOM

Page 35 of 38 FirstFirst ... 253334353637 ... LastLast
  1.    20 Nov 2017 #341

    Thank you!

    Sadly, this solution does not work for me
      My ComputerSystem Spec

  2.    20 Nov 2017 #342

    Mike0094 said: View Post
    Thank you!

    Sadly, this solution does not work for me
    It might help if you quoted who (me I guess) suggested something, what you did and what didn't work.

    Ideally you should note the error or warning messages received.

    Otherwise I can only say I'm sorry to hear that whatever you did (whatever it was), didn't work.
      My ComputerSystem Spec

  3.    20 Nov 2017 #343

    Vaio 7 said: View Post
    Event id 7031, you will have to wait until M$ provides a fix it happens during shutdown and its Sync Host session, I have the same.
    Same for Event id 10010, Cortana, not much to do.
    Now Event Id 10016 can be easily fixed. When you look @ the Event Viewer description there is a CLSID and an AppID involved.
    You will have to open regedit with admin rights, navigate to HKeyClassesRoot\CLSId and when you find the id in question, right click then Permissions and temporarily change owner from TrustedInstaller to Administrators.
    Same for HKEYLocalMachine\Appid.
    Now open Component Services, Computer, My computer, DCOM config and find ( from the Registry keys above) the Description, it should be Runtime Broker, at least it was for me, if it's other then do it for the exact Component service, right click then Properties then Security tab, then open the Launch and Activation permissions Edit button and depending on the Event Viewer description if it's Local Service or System, click Add, add one of the two and enable the box " Local Activation".
    Now go back to regedit and for the CLSID & Appid changed ownerships revert back to default TrustedInstaller.
    (You should write NT SERVICE\TrustedInstaller to revert ownership to default).
    Reboot and Error 10016 is gone forever.
    I tried to use this method, my issue is a system error ( event ID 10016) :

    The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID {C2F03A33-21F5-47FA-B4BB-156362A2F239} and APPID {316CDED5-E4AE-4B15-9113-7055D84DCC97} to the user michele\my pc SID (S-1-5-21-2832376193-1952021688-2811500842-1001) from address LocalHost (Using LRPC) running in the application container Microsoft.SkypeApp_12.8.487.0_x64__kzf8qxf38zg5c SID (S-1-15-2-2246530975-808720366-1776470054-230329187-4153223113-3550430174-4193313734). This security permission can be modified using the Component Services administrative tool.
      My ComputerSystem Spec

  4.    20 Nov 2017 #344

    You can try adding launch and activation permissions for user "All Application Packages" and see if that helps. I assume you have already added those permissions for the user "my pc"; if not, do that first. Finally, even after having added all the right permissions you may still see these error messages. Microsoft badly broke their DCom system in Windows 10, so some of these errors cannot be resolved. Word on the street is that you can ignore these errors safely, but nobody knows for sure.
      My ComputerSystem Spec

  5.    20 Nov 2017 #345

    Pirx said: View Post
    You can try adding launch and activation permissions for user "All Application Packages" and see if that helps.
    Why? Why would you want to give all apps that authority? To do what?

    Sure it would remove the error message but at the expense of giving every single Windows Store app the authority to do whatever they want. Authority for Store Apps is complex and a "whatever, do what you want" approach is rather cavalier I think.

    Pirx said: View Post
    Word on the street is that you can ignore these errors safely, but nobody knows for sure.
    Or you can randomly give authority to processes to do what they want and swap an increased risk for less messages.

    Only you can decide if randomly changing permissions is better than living with incorrectly written messages to a log you would only look at if you had a problem.

    I agree with your point though on the whole.
      My ComputerSystem Spec

  6.    20 Nov 2017 #346

    Pirx said: View Post
    You can try adding launch and activation permissions for user "All Application Packages" and see if that helps. I assume you have already added those permissions for the user "my pc"; if not, do that first. Finally, even after having added all the right permissions you may still see these error messages. Microsoft badly broke their DCom system in Windows 10, so some of these errors cannot be resolved. Word on the street is that you can ignore these errors safely, but nobody knows for sure.
    So people without any knowledge about registry&co should just ignore this error yes?
      My ComputerSystem Spec

  7.    20 Nov 2017 #347

    Vaio 7 said: View Post
    Event id 7031, you will have to wait until M$ provides a fix it happens during shutdown and its Sync Host session, I have the same.
    Same for Event id 10010, Cortana, not much to do.
    Now Event Id 10016 can be easily fixed. When you look @ the Event Viewer description there is a CLSID and an AppID involved.
    You will have to open regedit with admin rights, navigate to HKeyClassesRoot\CLSId and when you find the id in question, right click then Permissions and temporarily change owner from TrustedInstaller to Administrators.
    Same for HKEYLocalMachine\Appid.
    Now open Component Services, Computer, My computer, DCOM config and find ( from the Registry keys above) the Description, it should be Runtime Broker, at least it was for me, if it's other then do it for the exact Component service, right click then Properties then Security tab, then open the Launch and Activation permissions Edit button and depending on the Event Viewer description if it's Local Service or System, click Add, add one of the two and enable the box " Local Activation".
    Now go back to regedit and for the CLSID & Appid changed ownerships revert back to default TrustedInstaller.
    (You should write NT SERVICE\TrustedInstaller to revert ownership to default).
    Reboot and Error 10016 is gone forever.
    is the last step important?
    "Now go back to regedit and for the CLSID & Appid changed ownerships revert back to default TrustedInstaller."
    because ive found a more detailed guide to your way of fixing this but theres no mention of it..
      My ComputerSystem Spec

  8.    20 Nov 2017 #348

    I generally say that unless the error is marked as critical, then don't worry too much about it. But it depends on the nature of the error. Worth looking from time to time but not fretting over.
      My ComputersSystem Spec

  9.    20 Nov 2017 #349

    swarfega said: View Post
    Worth looking from time to time but not fretting over.
    I disagree. I think it isn't worth looking into at all unless as a hobby.

    I'm signing off this thread now but good luck to y'all fiddling with it.
      My ComputerSystem Spec

  10.    20 Nov 2017 #350

    I think thats what I said. Generally its not worth the time.
      My ComputersSystem Spec


 
Page 35 of 38 FirstFirst ... 253334353637 ... LastLast

Related Threads
Event 10016, DistributedCOM in Performance & Maintenance
Since upgrading to Windows 10, my error log is flooded with this message. Over 520 incidents in the past week. The instructions provided for that error in Windows 8 do not work with 10, since it is impossible to grant full permission to the...
Weird event viewer errors in Performance & Maintenance
Hello, Event Viewer is showing the following errors: The User Data Storage_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service. The User...
This appears to be a general issue with windows 10, I always get the following errors on shutdown: The VMware Workstation Server service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000...
Worried about event viewer errors in Performance & Maintenance
hi guys managed to install windows 10 and everything seems to be working great. I looked in event viewer and I'm getting loads of errors, the same over and over. one is that keeps coming up is kernel-power event id 137 The system...
ESENT errors in my Event Log in BSOD Crashes and Debugging
On Windows 10 Pro x64 I am getting quite a few ESSENT errors in my Event Log after I start up W10. I see Event ID's 413, 455, 488, and 489. If these are indicative of a problem does anyone know the fix? Thanks
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 18:48.
Find Us