Slow Windows 10 Pro boot version 1903

Code:

Repairing corrupted file \??\C:\Windows\System32\Drivers\\dxgkrnl.sys from store

Code:

Repairing corrupted file \??\C:\Windows\System32\Drivers\\ndproxy.sys from store

It's best to run one at a time even though both could run at the same time.

zbook said:

Code:

Repairing corrupted dxgkrnl.sys, ndproxy.sys from store

and how I do it?

Another question:
Will I have to run HD Tune and Sea Tools on my SSD? .. so why is the SSD 20 days old, I bought it recently !. HD is much older. Can you do these types of tests on SSD's?

thank you
Clamarc

Most drives can be tested.
(test all drives)

Scannow recorded the corruption.

If there is any recurrent corruption > perform an in place upgrade repair

zbook said:

If there is any recurrent corruption > perform an in place upgrade repair

hi zbook,

But hasn't sfc /scannow done that already?... we ran it and dism commands and everything worked out ?!

I don't have a Windows Install disc, I only have a Repair disc that was created when I saved the system image on my HD! ... but if I use the repair disc, it will also have these corrupted files, since the image was created recently, am I right? ...
... that is, it won't do any good to use the repair disk, am I correct or not?

If the repair disk is not useful, how do I recover the files?

thank you
Clamarc

The scannow command was ran.
It found corrupt files and fixed them.
Scannow was ran a second time and found no corruption.

When you posted the CBS log it was scanned.
It displayed that it had repaired two corrupt files.
They were posted in the prior post.

Run Crystal Disk standard edition:
CrystalDiskInfo – Crystal Dew World


Run HD Sentinel: (free or trial edition)
Hard Disk Sentinel - HDD health and temperature monitoring
Hard Disk Sentinel - HDD health and temperature monitoring
For each drive post images of these tabs into the thread:
Overview tab
Temperature
SMART
Disk performance

Take Screenshot in Windows 10 Windows 10 General Tips Tutorials
Take Screenshot in Windows 10

zbook said:

Run HD Sentinel: (free or trial edition)

For each drive post images of these tabs into the thread:
Disk performance

In hd Sentinel, the Disc Performance tab, displays the message:
Real time performance monitoring is not supported on this disk.

More information
Hard Disk Sentinel Frequently Asked Questions

I opened the Windows services screen and started the Performance Counter DLL Host Service, but it didn't solve the problem. What should I do for the information in this tab to appear on HD Sentinel?

Note: Both for SSD and HD.

Thank you
Clamarc

Skip the blank HD Sentinel tab.

zbook said:

Skip the blank HD Sentinel tab.

ok, zbook,

Follows requested images.

CrystalDiskInfo SSD and HD Image:


Sentinel SSD images:




HD Sentinel Images:




thank you
Clamarc