1. Joined : Jul 2015
    Posts : 23
    Win7 Home Premium & Win10 Home in dual boot
       09 Aug 2015 #1

    System Restore permanently disabled and cannot re-enabled


    Hi

    Since installing Windows 10 I've had a problem with System Restore. I've searched the web (including this forum) but so far have not found anyone with my particular problem. I'm not saying they're not there, just that I've not found them yet.

    As you can see from the attached graphic, I can access the System Restore panel but System Restore for the Windows drive is turned off (orange box) and the means of restoring to an earlier restore point as well as Create are greyed out. The ONLY thing the window allows me to do is to go to the Configure panel. When I get there I find that System Protection is disabled and I cannot turn it on. However, my system IS using some space (blue box) although I have a sneaky suspicion that has not changed since I installed W10.

    My question therefore is really: how do I enable System Restore? I am sincerely hoping that someone has a possible solution to this and any help would be most appreciated. Thanks.

    Tracey

    PS After writing the above I did a search in the registry for System Restore but there were only about six or seven references. I also had a quick look at Services and noticed that VSS was stopped. Following a search which revealed that System Restore might depend on it I started it. I then signed out and then back in again but I still can't get System Restore enabled.
    Attached Thumbnails Attached Thumbnails Sr1.PNG  
      My System SpecsSystem Spec


  2. Joined : Jan 2014
    Walnut Beach, Milford, Ct
    Posts : 7,551
    Win10 Pro / Remix 3.0
       09 Aug 2015 #2

    Are you signed in as Administrator ?
      My System SpecsSystem Spec


  3. Joined : Jul 2015
    Posts : 23
    Win7 Home Premium & Win10 Home in dual boot
       09 Aug 2015 #3

    As far as I am aware - or are you talking about the built-in administrator account. If are talking about that then no I'm not.

    Tracey

    PS: Something I didn't say in my initial post is that I have Windows 10 Home
      My System SpecsSystem Spec


  4. Joined : Aug 2015
    Posts : 1
    Windows 10 Pro
       14 Aug 2015 #4

    Same Problem


    I was having the same problem, and after looking around I found your post. I was having the same issue, as I wanted to go back to a earlier restore point, but couldn't fine any. After reading your post, I was playing around and I found out how to turn it on.

    Go back to the system properties screen as shown in your post.

    Click on the drive that you want protection on, then click on configure.
    Under restore settings, click on “turn on system protection.
    Then below that, adjust the disk space usage.
    You should now be able to create a restore point.
      My System SpecsSystem Spec


  5. Joined : Dec 2015
    Posts : 1
    Windows 10 Pro
       16 Dec 2015 #5

    "turn on system protection" is GRAYED OUT and can NOT be clicked on.


    You miss the point - the option to "turn on system protection" is NOT available, it is GRAYED OUT, and can NOT be checked.
    The question is HOW to make it an active option on the configure page (so I CAN check the option).
    I have the same problem - just upgraded to windows 10 (nightmare in itself), and yes, I have used GPEDIT.MSC to edit group controls to DISABLE the disabling of 2 user protection options (seems backward at first, but makes sense if you read the detailed explanation - ie double negative means disabling at group level enables at individual level).
    Also used REGEDIT to check the settings to make sure they were both set to zero, not 1. But the "enable system protection" option is still grayed out, as shown in original post.
    So, does anyone know how to change that from a grayed out option to active one that I can actually click on to enable sys protection?
      My System SpecsSystem Spec


  6. Joined : Dec 2013
    England
    Posts : 837
    Windows IP 15007 Windows 14393.693
       17 Dec 2015 #6

    jakamon said: View Post
    You miss the point - the option to "turn on system protection" is NOT available, it is GRAYED OUT, and can NOT be checked.
    The question is HOW to make it an active option on the configure page (so I CAN check the option).
    I have the same problem - just upgraded to windows 10 (nightmare in itself), and yes, I have used GPEDIT.MSC to edit group controls to DISABLE the disabling of 2 user protection options (seems backward at first, but makes sense if you read the detailed explanation - ie double negative means disabling at group level enables at individual level).
    Also used REGEDIT to check the settings to make sure they were both set to zero, not 1. But the "enable system protection" option is still grayed out, as shown in original post.
    So, does anyone know how to change that from a grayed out option to active one that I can actually click on to enable sys protection?
    Go to Services and check whether Volume Shadow Copy stopped. If it has, start it by right clicking it.
    Click image for larger version. 

Name:	Capture 100.JPG 
Views:	79 
Size:	22.2 KB 
ID:	54003
    EDIT: In future start a new thread and don't post in old threads, you will get more response as old threads viewed seldom
      My System SpecsSystem Spec


  7. Joined : Oct 2013
    Posts : 1,962
    Windows 7
       17 Feb 2016 #7

    See whether this commmand can fix it:

    "%windir%\system32\rundll32.exe /d srrstr.dll,ExecuteScheduledSPPCreation"

    Paste this exact string into an elevated command prompt and hit Enter.
      My System SpecsSystem Spec


  8. Joined : Jul 2016
    Posts : 1
    Windows 10
       08 Jul 2016 #8

    Totally Worked... Thanks!!!!!

    everklier said: View Post
    I was having the same problem, and after looking around I found your post. I was having the same issue, as I wanted to go back to a earlier restore point, but couldn't fine any. After reading your post, I was playing around and I found out how to turn it on.

    Go back to the system properties screen as shown in your post.

    Click on the drive that you want protection on, then click on configure.
    Under restore settings, click on “turn on system protection.
    Then below that, adjust the disk space usage.
    You should now be able to create a restore point.
      My System SpecsSystem Spec


  9. Joined : Jul 2016
    London
    Posts : 2
    Win 10 Pro
       18 Jul 2016 #9

    Sorry didn't work for me


    questech said: View Post
    Totally Worked... Thanks!!!!!
    I have the same problem as Tracey W & Jakamon and have spent all day searching the net for possible solutions. In desperation, I even upgraded to Win10 Pro from Home and still have the same.

    I pasted into a Administrator Command Prompt exactly as shown but got "Directory Name Invalid". Anybody any other ideas, or can anyone recommend where else I should look? I am not technical but am having to be very tenacious?


    ps. I have since explored this great forum and have arrived at the solution for me.
    Thanks TairiKuOkami. I can now get my life back.
    Solved Can't enable System Restore - Windows 10 Forums
    Last edited by chinarog; 18 Jul 2016 at 13:43. Reason: Update
      My System SpecsSystem Spec


 


Similar Threads
Thread Forum
System Restore Windows 10
How to Do a System Restore of Windows 10 If you're having problems with Windows 10 on your PC, you can try to refresh, reset, or restore it. System Restore is a way to undo system changes by using restore points to return your system files...
Tutorials
Solved Why is system restore disabled by default?
Any ideas? I understand, that 10 relies on reset/refresh, but disabling SR is a bit drastic. :shock: Especially taking into account, how many flaws are in 10 right now, I wonder how it made RTM.
Performance & Maintenance
System Restore disabled and cannot enable it
Hi Since installing Windows 10 I've had a problem with System Restore. I've searched the web (including this forum) but so far have not found anyone with my particular problem. I'm not saying they're not there, just that I've not found them yet....
General Support
Solved System Restore
How do I get to system restore on Windows 10?
General Support
Solved Why is system restore not enabled as default?
Hey Guys Is there a reason system restore is not enabled as default? Not needed any more/ is there now a better alternative ? Many thanks....
General Support
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 14:21.
Find Us
Twitter Facebook Google+



Windows 10 Forums