V1903 Causing DPC Latency Hits Solved

Page 1 of 2 12 LastLast
  1.    #1

    V1903 Causing DPC Latency Hits


    I use my desktop for general PC ops and also for my recording studio. With all versions including 1809 I haven't had any issues with latency/clicks/dropouts in audio, etc. Resplendence Latency Mon shows no problems. However, with 1903 there is Latency problems. The "culprits" according to Latency Mon are USB bus and/or High Definition Audio (Realtek). I've restored my PC back to the 1809 5/22/19 disc image I did before upgrading to 1903. I've run Latency Mon again after restoring and still no issues (with 1809). This has also been reported on the gearslutz forum by another user.
    Here are the Latency Mon screenshots, both for 1903 and 1809.
    Click image for larger version. 

Name:	Latency Mon 1903.JPG 
Views:	4 
Size:	140.3 KB 
ID:	235554Click image for larger version. 

Name:	Latency Mon 1809.JPG 
Views:	3 
Size:	111.1 KB 
ID:	235555
      My ComputersSystem Spec

  2.    #2

    Update, I ran the Resplendence Latency Mon on my Insider Build 18908 and it too is OK. Its the same hardware (dual boot system) as the 1903 release.
    Click image for larger version. 

Name:	Latency Mon V18908.PNG 
Views:	1 
Size:	49.0 KB 
ID:	235574
      My ComputersSystem Spec

  3. TairikuOkami's Avatar
    Posts : 3,747
    Home 1903 x64 10.0.18362.175
       #3

    Try to set the timer to 0.5 ms via either of those, the second one also deals with the standby memory bug.

    Windows System Timer Tool | vvvv

    Intelligent standby list cleaner v1.0.1.1 Released | Wagnardsoft
    Attached Thumbnails Attached Thumbnails capture_05302019_200439.jpg   capture_05302019_200151.jpg  
      My ComputerSystem Spec

  4.    #4

    Why only 1903? 1809 (and earlier versions) does not have the problem. The current Insider version does not have the problem. Those linked tweats may fix it but shouldn't have to.
      My ComputersSystem Spec

  5.    #5

    Another update. I decided to give 1903 another try this morning. I downloaded/installed again. Build 18362.145 (I don't know what the other 1903 build number was). I ran Latency Mon for over 5 minutes and no hits. I couldn't do that before. I can only guess either a later build that fixed it or I had a bad install before.

    I'm not marking this solved, yet.
      My ComputersSystem Spec

  6.    #6

    My Latency problem is (apparently) gone with the new 1903 install. I'm marking this solved.
      My ComputersSystem Spec



  7. Posts : 3
    Windows 10 EDU
       #7

    I'm still getting some ntoskrnl.exe hits off about 700us, but they come at much farther intervals than before. I could go 3-4 mins before it happens, those huge 3000us spikes have since been resolved either by me turning off more services or that cumulative update the other day. Nobody else is having problems?
      My ComputerSystem Spec

  8.    #8

    On the first 1903 install I also ran across a problem with my MOTU 4pre USB recording interface unit. It was recognized by the MOTU control program but my recording programs (Sonar and Studio One 4.5) did not detect it. I had to Repair the 4pre driver before it was recognized. On the second install, along with no latency problems I did not have the 4pre driver problem.

    I've run Latency Mon for 15 minutes and it was still "happy".
      My ComputersSystem Spec


  9. Posts : 3
    Windows 10 EDU
       #9

    Another thing that helped me out was disabling MSI-mode on my network adapter, it for some reason stopped big ntoskrnl.exe spikes.
      My ComputerSystem Spec

  10.    #10

    Here is the Latency Mon, run this morning for 10 minutes.
    Click image for larger version. 

Name:	ASUS 1903 V2.JPG 
Views:	2 
Size:	118.3 KB 
ID:	236186
      My ComputersSystem Spec


 
Page 1 of 2 12 LastLast

Related Threads
Source: https://blogs.technet.microsoft.com/secguide/2019/05/23/security-baseline-final-for-windows-10-v1903-and-windows-server-v1903/
Build: i5 8600k 4.5ghz. 1x sandisk 120gb ssd. (boot drive, clean install of windows and latest update.) 1x samsung 860 Evo 1TB ssd. Z370 HD3 Gigabyte Mobo.
Hi all, apologies for the length, trying to enclose as much info as possible. I have an external firewire audio interface that I use with music keyboard and various music software. Having problems with latency. It sounds like a static type...
i ran latencymon and did a trace, but am unsure how to procede
I've built a new PC (i5 6600k, GTX 970, 16 GB DDR4 RAM) that's cost me a lot of money only for it to have to have loads of sound cracking whilst gaming. I've already had someone else on another forum have a go at fixing this but they couldn't get...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 08:34.
Find Us