Windows 10: Windows 10 - slow startup after restart only

Page 3 of 5 FirstFirst 12345 LastLast
  1.    09 Aug 2015 #21

    I agree with both of you, the problem is the shutdown. Could you please check if disabling the bluetooth device solves the issue ?
    In my case it does, so I do have where to start looking. Unfortunately I am looking but I dont see anything !!!!!
    Thx.
      My ComputerSystem Spec

  2.    09 Aug 2015 #22

    elito said: View Post
    I am running an i7, 16gb RAM and a 512gb SSD. The "weak hardware and slow HDD" does not apply.
    Defrag is not recommended for SSD drives.
    Nobody found relevant the bluetooth issue ? Why disabling the bluetooth gets me back to 21st century reasonable reboot times ?
    Thanks.
    Yes, your issue over Bluetooh may be relevant. I run a System with i Quad q6600 - 4GB RAM Dual Channel - SSD Crucial MX 100 256GB - and the time of shutdown is <2 sec. The Startup time is only 7 seconds. And yes, my bluetooth Service and relates with him, are disabled.
    But, I run a clear installation and - very important - The Fast Startup feature of Windows is able. This is, more of the times, the secret.
    Hope you can solve your trouble.
    Last edited by Enrique; 09 Aug 2015 at 14:35. Reason: Correction word ones
      My ComputerSystem Spec

  3.    09 Aug 2015 #23

    Why do you have the Bluetooth disabled ? Because you dont have any Bluetooth devices or because it causes problems ?
    I do have the Fast Startup enabled.
      My ComputerSystem Spec

  4.    09 Aug 2015 #24

    I disable anything I don't need running using Autoruns but I agree that Windows 10 is more sluggish after bootup than Windows 7 or 8 was.
      My ComputerSystem Spec


  5. Posts : 192
    Windows 10 Home 64 bit
       09 Aug 2015 #25

    I have always had a black screen in between the Windows logo screen and the "please wait" or Welcome screen, even in 8.1. I always considered it normal and never worried about it. It still does the same from a cold boot or restart (I have hibernation disabled so fast boot doesn't work). My boot time is about 85 seconds from my 7200 RPM HDD and I'm satisfied with that. Immediately after the upgrade and before doing the defrag and registry clean, it was well over 3 minutes.

    If you wait long enough, the Windows Auto-maintenance will kick in and use the Windows defragger to optimize things but you may have to wait up to a week and even then, the process is painfully slow.

    I also have Windows set to automatically log me in so I never see the Lock screen.
      My ComputerSystem Spec

  6.    09 Aug 2015 #26

    I believe your times are a little bit to high. Should check startup items and Event viewer as Snakeyes suggested some posts before

    "Type in event viewer in your start window.
    In the window that opens up (left-hand side) click on Application and Services Logs/Microsoft/Windows/Diagnostics-Performance..
    Tap on operational (still on the left-hand side)


    On the right-hand side you will see (center panel) successive event IDs. Each will have an execution time associated with it. Event IDs 100 reflect boot performance. Event IDs 200 – 20x reflect shutdown performance. If you double-click on any one of them and then click on the details tab you will get a rundown of the boot or shutdown process and the Durations associated with each. Comparing different event IDs reflecting different reboots will give you a good idea regarding the delays in shutdown or boot."

    Hope this will get you better time.
      My ComputerSystem Spec


  7. Posts : 192
    Windows 10 Home 64 bit
       09 Aug 2015 #27

    elito said: View Post
    I believe your times are a little bit to high. Should check startup items and Event viewer as Snakeyes suggested some posts before

    "Type in event viewer in your start window.
    In the window that opens up (left-hand side) click on Application and Services Logs/Microsoft/Windows/Diagnostics-Performance..
    Tap on operational (still on the left-hand side)


    On the right-hand side you will see (center panel) successive event IDs. Each will have an execution time associated with it. Event IDs 100 reflect boot performance. Event IDs 200 20x reflect shutdown performance. If you double-click on any one of them and then click on the details tab you will get a rundown of the boot or shutdown process and the Durations associated with each. Comparing different event IDs reflecting different reboots will give you a good idea regarding the delays in shutdown or boot."

    Hope this will get you better time.
    The heck with that. Every single event in there either says error or warning and the times are all in ms. It also gives me no clue on how to change anything. I don't have the time nor inclination to look through all that crap. Like I said, I'm satisfied with my boot time. It was just about the same in 8.1, and everything works fine. I monitor my startup items and only let run what I want and I really don't think much of anything can be done to improve things other than turning off stuff that I want to be on. I use Classic Shell because even the new Start Menu is not good enough and I have a few custom scripts in Startup to disable the side buttons on my mouse and to turn on Scroll Lock so my keyboard lights up automatically at start. The other items include Java update, a great little utility called Clipboard Magic, CCC, my sound panel, Chrome updater, and the CCleaner and Speccy stuff to skip the UAC when opening them. Everything that loads, I need and want.

    I did enable Hibernation and try Fast Boot. With that on, my cold boot time was 37 seconds but I'd rather get a completely fresh load of Windows at boot so I turned it back off and went back to 85 which as I said, is just fine to me.

    The times are measured from the press of the power button to the loading of the things in the Startup folder which always load last. The time from pressing the power button to when the BIOS posting is done and the Windows logo comes up is 15 seconds in itself.
    Last edited by Dch48; 09 Aug 2015 at 17:53.
      My ComputerSystem Spec

  8.    09 Aug 2015 #28

    Also I forgot to say to also turn off that useless Cortana. With it on my Core 5 PC felt like I running on a 486 on startup.
      My ComputerSystem Spec


  9. Posts : 192
    Windows 10 Home 64 bit
       09 Aug 2015 #29

    reddice said: View Post
    Also I forgot to say to also turn off that useless Cortana. With it on my Core 5 PC felt like I running on a 486 on startup.
    Yep, Cortana is completely turned off as are the Search window and Taskview buttons in the taskbar. I have no use for any of those.
      My ComputerSystem Spec

  10.    10 Aug 2015 #30

    mkdr said: View Post
    Do you mean with 40sec-1min that you have a black screen before the login appears? Because that's some bug which also could already happen on Windows 8.1 too, I had it so far on three different machines and never figured out what was causing it.
    Just finished building my new system about a month ago. With 8.1, my boot time was about 13 seconds. That's the way it stayed right up until I installed Windows 10 last week. After getting tired of the bugs in 10 (mainly my start button not responding), I rolled back to 8.1. Now my boot time is over a minute of just sitting at a black screen, and when it finally loads to my login screen, my USB mouse takes another 30 seconds before it starts working.

    Is this something I can fix? If I had known rolling back from 10 would screw up my system like this, I'd not have done it.
      My ComputerSystem Spec


 
Page 3 of 5 FirstFirst 12345 LastLast

Related Threads
What is your Windows 10 Restart Time? in PC Custom Builds and Overclocking
Strictly Windows 10 only. Remember this is not a cold boot. Restart Time - Windows 7 Help Forums I was a little disappointed with my new build but here it is anyway (Build 10122): 19738
Logoff, Logon, shutdown, restart, startup sounds not playing in Windows 10. What should I do?
Strange. I have a restart button on a gadget control panel and it takes forever to restart. If I use the restart supplied with the Start menu, it is its usual quick self. Problem is that I had to do a restart for Calibre and it too was hung for all...
Update slow then bam no boot after restart. in Windows Updates and Activation
Hi Just ran WU today with 3 updates on 10 TP in VMware player, the updates were stuck at 66% for ages then completed and said a restart was scheduled. so I restarted straight away. After the restart the screen said configuring Windows with...
Startup Slow in Performance & Maintenance
I don't if this is already a feature I don't know about or if its something i should suggest to Microsoft to implement... After the welcome screen when it shows the desktop, my laptop is normally unresponsive for around 30 seconds. I know that...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 21:44.
Find Us