Page 3 of 7 FirstFirst 12345 ... LastLast

  1. Joined : Oct 2015
    Posts : 1,393
    Windows 10 Pro X64
       12 Mar 2016 #21

    Hi,

    Currently running it on a Wintogo USB stick.

    Will report back.

    Cheers,

    EDIT: Same thing on the Wintogo drive. Rebooted and now it runs fine. Will repeat this on the regular internal drive install as well.
    Last edited by fdegrove; 12 Mar 2016 at 19:09.
      My System SpecsSystem Spec


  2. Joined : Oct 2015
    Posts : 1,393
    Windows 10 Pro X64
       12 Mar 2016 #22

    Hi,

    On the regular install the problem persists even after rebooting and rerunning the test several times.
    Problem is, no errors are reported anywhere, the program just runs and that the end of that....

    Any ideas out there on how to fix this ?

    TIA,
      My System SpecsSystem Spec


  3. Joined : Feb 2015
    Bamberg Germany
    Posts : 12,952
    Microsoft Windows 10 Pro 64-bit 14393 Multiprocessor Free
       13 Mar 2016 #23

    Good morning @fdegrove

    Have you tried the link to Shawn's tutorial, in the first post?
    Performance monitor and System Diagnostics need to be running.
    3rd party software, such as an overzealous Anti Virus/Malware, or UXtheme patchers, or programs that supposedly turns off "Microsoft Spying" & data collection, can cause, both of these and their services, to stop working.
      My System SpecsSystem Spec


  4. Joined : Oct 2015
    Posts : 1,393
    Windows 10 Pro X64
       13 Mar 2016 #24

    Hi,
    @Cliff S, thanks for chipping in.

    I suspect it has to do with MS data collection but I have no clue what exactly I'd need to change.
    As said, the program runs but doesn't create a report.

    For info, I've not installed anything that would alter the system in a way you suggested.


    Cheers,
    Last edited by fdegrove; 14 Mar 2016 at 15:33.
      My System SpecsSystem Spec


  5. Joined : Nov 2015
    Posts : 10
    Windows 8.1, Windows 10
       14 Mar 2016 #25

    Hi Cliff
    There was no way to start <perfmon /report>and other thinks yesterday.
    Resetting my PC as Windows 10. Installed a few applications like: Google, CCleaner, Windows Defender.
    Start run from Run <perfmon /report>. First time was working.
    After restart PC, can not start it again does not matter how long I keep it in.
    Do not have any idea what to do next
    Regards
      My System SpecsSystem Spec


  6. Joined : Oct 2015
    Posts : 1,393
    Windows 10 Pro X64
       14 Mar 2016 #26

    Hi,

    For further info, I reran the test on the Wintogo drive again yesterday, no cigar.
    What annoys me is that there's no error report generated as far as I can tell.


    Cheers,
      My System SpecsSystem Spec


  7. Joined : Feb 2015
    Bamberg Germany
    Posts : 12,952
    Microsoft Windows 10 Pro 64-bit 14393 Multiprocessor Free
       14 Mar 2016 #27

    ZofiaDor said: View Post
    Hi Cliff
    There was no way to start <perfmon /report>and other thinks yesterday.
    Resetting my PC as Windows 10. Installed a few applications like: Google, CCleaner, Windows Defender.
    Start run from Run <perfmon /report>. First time was working.
    After restart PC, can not start it again does not matter how long I keep it in.
    Do not have any idea what to do next
    Regards
    fdegrove said: View Post
    Hi,

    For further info, I reran the test on the Wintogo drive again yesterday, no cigar.
    What annoys me is that there's no error report generated as far as I can tell.


    Cheers,
    The only thing I can think of is trying it the long way, from Performance Monitor: System Health Report - Generate and View in Windows 8.1
      My System SpecsSystem Spec


  8. Joined : Oct 2015
    Posts : 1,393
    Windows 10 Pro X64
       15 Mar 2016 #28

    Hi,

    Unfortunately that yields the exact same result as running perfmon /report.

    Cheers,
      My System SpecsSystem Spec


  9. Joined : Feb 2015
    Bamberg Germany
    Posts : 12,952
    Microsoft Windows 10 Pro 64-bit 14393 Multiprocessor Free
       15 Mar 2016 #29

    1. Check in Services if "Performance Logs & Alerts" Startup Type: Manual >>>Status is stopped(until perfmon is run).
    2. Also "RPC Endpoint Mapper" should be set to Startup Type: Automatic>>>Status: Running.
    3. An lastly see if "DCOM Server Process Launcher" is set to Startup Type Automatic>>>Status: Running.
      My System SpecsSystem Spec


  10. Joined : Oct 2015
    Posts : 1,393
    Windows 10 Pro X64
       15 Mar 2016 #30

    Hi,

    All services are set as described.
    However, running perfmon /report does not trigger the "Performance Logs & Alerts" service to change its status from stopped to running.

    The odd thing is though, when I start it manually it still doesn't make any difference....
    Strange....

    Cheers,
      My System SpecsSystem Spec


 
Page 3 of 7 FirstFirst 12345 ... LastLast


Similar Threads
Thread Forum
Now Gone: Photosynth, Food & Drink, Health & Fitness, and Travel apps
Read more: Microsoft is shutting down its Photosynth, Food Fitness and Travel apps
Windows 10 News
Microsoft Health and Microsoft Band: The Next Step
Source: Microsoft Health and Microsoft Band: The Next Step in Our Journey - The Official Microsoft Blog
Windows 10 News
Introducing Microsoft Health
Source...
Windows 10 News
Windows 9 Might Not Work on 32-Bit Computers Report
More
Windows 10 News
Windows 9 Could Launch with DirectX 12 Report
Read the rest here:
Windows 10 News
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:53.
Find Us
Twitter Facebook Google+



Windows 10 Forums