Windows 10: Windows 10 SSD TRIM help Solved

Page 1 of 2 12 LastLast
  1.    08 May 2018 #1

    Windows 10 SSD TRIM help


    I have been using a Samsung 850 EVO for just over 2 years as my OS drive and it transformed my pc, fast and quiet. In the last few months I noticed it is not being automatically optimized/trimmed by Windows 10 on it's weekly schedule. I am able to manually optimize it.

    I checked if trim was enabled by running this command

    Click image for larger version. 

Name:	trim Capture.PNG 
Views:	65 
Size:	25.4 KB 
ID:	187855

    It says "DisableDeleteNotify =0" which should mean trim is enabled, but it also says Disabled next to it

    I installed Samsung Magician which states trim is enabled. Speed benchmarks seemed fine also.

    I do have two partitions on the one SSD (one for OS and one for games) Could this be causing an issue? I want to be sure the SSD is being trimmed/optimized properly to ensure the reliablity of the drive.

    Thanks.
    Attached Thumbnails Attached Thumbnails image.png  
      My ComputerSystem Spec

  2. Faith's Avatar
    Posts : 430
    Windows 10 Home April 2018 Update 64-bit
       08 May 2018 #2

    I get the same disabled message on both PowerShell and CMD, I have never seen that before. But I can see that my secondary drive for games got optimized yesterday, consequently I installed a game recently on it. I think Windows just ignores that schedule on partitions/drives when it's not needed. My main partition for the os hasn't been touched in 24 days according to Windows regardless of a weekly schedule. I think it's "normal".
      My ComputerSystem Spec


  3. Posts : 1,337
    W10 pro x64 and W8.1 x86
       08 May 2018 #3

    I have commented on this for a long time and conclude its a bug:

    Calling SSD users. What does your 'Optimise' window show ?
      My ComputerSystem Spec

  4. Faith's Avatar
    Posts : 430
    Windows 10 Home April 2018 Update 64-bit
       08 May 2018 #4

    Mooly said: View Post
    I have commented on this for a long time and conclude its a bug:

    Calling SSD users. What does your 'Optimise' window show ?
    Then it must be a bug that's been happening for aeons then because this behavior has been there since this feature came out on Windows 7. Regardless of what it's supposed to do, one shouldn't worry about it when running SSDs. :) However I'm curious -- as pliskken -- as to why it says disabled in PS and CMD. I can't recall it saying that in the previous W10 builds.
      My ComputerSystem Spec

  5.    08 May 2018 #5

    I have a Samsung 950 Pro NVMe SSD. Magician says trim is turned on. I get the same results from the PS command as you do. My advice: don't worry about it. Nothing to worry about, as far as I can tell.
    HTH,
    --Ed--
    Click image for larger version. 

Name:	image.png 
Views:	45 
Size:	21.0 KB 
ID:	187881
    Click image for larger version. 

Name:	image.png 
Views:	3 
Size:	325.0 KB 
ID:	187882
      My ComputersSystem Spec

  6. Brink's Avatar
    Posts : 32,306
    64-bit Windows 10 Pro build 18242
       08 May 2018 #6

    It's a bit confusing, but it shows "0 (disabled)" for "disabledeletenotify" to have TRIM support enabled.

    Enable or Disable TRIM Support for Solid State Drives in Windows 10 | Windows 10 Tutorials
      My ComputersSystem Spec

  7.    08 May 2018 #7

    Thanks for the replies.

    I'l just leave it be and let windows or the firmware take care of it. The SSD is two years old and the health/speeds look ok so I must try not to worry ha.

    Is it ok to create multiple partitions on a SSD just like any old HDD? I do this so system image backups are smaller and faster to create.
      My ComputerSystem Spec

  8. Brink's Avatar
    Posts : 32,306
    64-bit Windows 10 Pro build 18242
       08 May 2018 #8

    Correct. You can treat a SSD just like a HDD.
      My ComputersSystem Spec

  9.    08 May 2018 #9

    Brink said: View Post
    Correct. You can treat a SSD just like a HDD.
    Apart from defragging it
      My ComputersSystem Spec

  10. Brink's Avatar
    Posts : 32,306
    64-bit Windows 10 Pro build 18242
       08 May 2018 #10

      My ComputersSystem Spec


 
Page 1 of 2 12 LastLast

Related Threads
How to Enable or Disable TRIM Support for Solid State Drives (SSD) in Windows 10 The TRIM command is essential to maintain the performance of solid state drives (SSDs) at an optimal level over the lifetime of the drive. TRIM functions by...
Solved Trim a New SSD? in Drivers and Hardware
Several months ago I replaced my system disk with an SSD. NowI just installed a Sandisk 240g to replace an old HDD data disk on build 1703. I initialized and formatted it using Minitools Partition Magic as a GPT disk and copied my the data from...
I created a ReFS storage pool in windows 10 pro with 2 Samsung 850 pro 512gb ssd's but when I ran the trim check it returned "ReFS DisableDeleteNotify is not currently set" These drives were previously installed as C: (os drive) and D: (secondary...
After update to Windows 10 Anniversary Update I cannot Trim SSD's. SSD's not recognised. I tried running "winsat formal" from an elevated (admin) command with no success. Any suggestions?
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 16:49.
Find Us