Windows 10: Powercfg -devicequery wake_armed what to untag in the device manager? Solved

  1.    02 May 2018 #1

    Powercfg -devicequery wake_armed what to untag in the device manager?


    Powercfg -devicequery wake_armed shows me following devices.


    Click image for larger version. 

Name:	SnagIt-02052018 105246.png 
Views:	1 
Size:	68.4 KB 
ID:	186989

    Probably... (I am not 100% sure)
    they may be the cause of my system not properly shutting down, but going to sleep instead.

    In the Device Manager, right click the respective item, properties, tab [Power Management] should I then untag both

    - Allow the computer to turn off this device to save power- Allow this device to wake the computer


    Any drawbacks?


    Thanks.
      My ComputerSystem Spec

  2.    02 May 2018 #2

    You could always take a "try it and see" approach to changing those specific settings. FWIW, I do have WOL turned on, but I have the power control "Allow the computer to turn off this device to save power" turned off. The latter seems to be most strongly related to "difficulties sleeping" in my experience.
    HTH,
    --Ed--
      My ComputersSystem Spec

  3.    03 May 2018 #3

    Many thanks indeed!

    I have disabled all the items successfully.

    Did not manage to disable the Internet Cards, they remained listed when running Powercfg -devicequery wake_armed
    Until I disabled hibernate.
    After that they were not listed anymore.

    There was a specific reason for disabling all this, but that is a long story.

    Thanks again!
      My ComputerSystem Spec

  4.    03 May 2018 #4

    Glad you got it sorted. Remember: with a current backup and knowledge of how to restore your OS, as long as you have time to perform a restore if needed, you can try just about anything out with nothing to lose but time, and a LOT to learn along the way.
    Good work!
    --Ed--
      My ComputersSystem Spec


 

Related Threads
One of my laptops (Dell XPS 13 9350) now has an annoying Unknown Device error in device manager and I've done everything I can think of to find the now missing driver. Issue wasn't present prior to April Update. - Unknown device has Hardware ID...
I upgraded to the April 2018 update yesterday and then this issue showed up. Basically, when Bluetooth is turned on, an Unknown device pops up in Device Manager. However, when I turn Bluetooth off, it disappears (screenshots below).The information...
Webcam was working a week ago. Suddenly Skype cannot detect my web cam . I went to Device Manager , selected the web cam under Imaging devices , then uninstalled the driver . Then went back to Device Manager and scanned for hardware changes. Now...
In Win7 I'd do Device Manager > Imaging Devices > USB 2.0 PC Camera to find my USB WebCam and activate it and de-activate the monitor's built-in camera. But in Win10 Device Manager has no listing for Imaging Devices. 84208 Where in Win10...
I basically just have a lot of random questions to be honest.. Probably easy for a lot of you! If you could work with me just a little bit that would be so much appreciated! For example: -BIOS help (x4,x1,auto for PCi) (Do I disable anything...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 05:05.
Find Us