Windows 10: Replacement Chassis Fans

Page 2 of 3 FirstFirst 123 LastLast
  1. ThrashZone's Avatar
    Posts : 3,839
    3-Win-7Prox64 2-Win10Prox64
       16 Nov 2017 #11

    Hi,
    I'm using a couple ML140's 1600rpm and a couple CoolMaster masterfan pro's 140 supposed to be 2800rpm on my radiator
    Looks like I missed it but there is a switch on the back side of them to change the speed mode
    MasterFan Pro 140 Air Pressure | Cooler Master
    Might have to check to see what mode they are set on looks like they might be in quite mode no way they've ever hit 2800rpm's
    They are kind of cheesy fans very soft plastic almost rubber feel :/

    All other fans
    Top rear and top back fans are 2-SP120 for exhaust and front top SP140 I switched to another Intake instead of a exhaust
    Keeping the intake pressure higher than the exhaust pressure
    The SP120's have a higher rpm I'm sure you know :)
      My ComputersSystem Spec

  2. Layback Bear's Avatar
    Posts : 994
    Windows 7/64 Professional
       25 Nov 2017 #12

    I use Phanteks, Noctua for the case and XS/PC fans for the radiators. I run them all at a 12 volts.
    The computer I'm on now has 14 fans and is quiet. I install as many fans as the case will allow.
    I can only get 9 fans in my other system.
    Going by my memory all the fans run around 1600 rpm.

    Jack
      My ComputersSystem Spec

  3. ThrashZone's Avatar
    Posts : 3,839
    3-Win-7Prox64 2-Win10Prox64
       25 Nov 2017 #13

    HI,
    Dang 14 fans
    When they go over 1600 rpm's we get a cold front in Texas
      My ComputersSystem Spec

  4. worf105's Avatar
    Posts : 2,429
    Windows 10 Pro 64-Bit (1809)
    Thread Starter
       14 May 2018 #14

    Hi all

    Only 6 months old and one of the 140mm fans have failed already. Sent Noctua a RMA request and noiw just have to wait ( first world problems)
      My ComputersSystem Spec

  5.    14 May 2018 #15

    Old thread I see but I love the Corsair fans. I currently have 2x140 and 1x120 HD fans and 2 x ML Pro 140 on my radiator. The HD are just such solid fans, quiet and of course lovely RGB. The same can be said for the ML Pro, solid stuff. If you've had Corsair AF fans these are a big step up. I have some Noctua and love those too.
      My ComputerSystem Spec

  6. worf105's Avatar
    Posts : 2,429
    Windows 10 Pro 64-Bit (1809)
    Thread Starter
       14 May 2018 #16

    Kol12 said: View Post
    Old thread I see but I love the Corsair fans. I currently have 2x140 and 1x120 HD fans and 2 x ML Pro 140 on my radiator. The HD are just such solid fans, quiet and of course lovely RGB. The same can be said for the ML Pro, solid stuff. If you've had Corsair AF fans these are a big step up. I have some Noctua and love those too.
    I did look at the ML fans from corsair as I do like and trust corsair stuff but though I give Noctua a try. I do like them. Will be putting my old corsair AF 140mm back in to see me over until I get them replaced. RMA in process just have to send them the LOT code on fan to proceed.
      My ComputersSystem Spec

  7. Dude's Avatar
    Posts : 12,209
    Windows 10 Pro X64
       14 May 2018 #17

    Bummer on the fan, glad you had a backup
      My ComputerSystem Spec

  8. worf105's Avatar
    Posts : 2,429
    Windows 10 Pro 64-Bit (1809)
    Thread Starter
       14 May 2018 #18

    Dude said: View Post
    Bummer on the fan, glad you had a backup
    hardly ever throw anything out Just a pain in the rear swapping one fan out due to the cable management being so neat. However I have just finished swapping the fan and all is good for now. (forgot that these Noctua fans disconnect at the fan housing so no need with tracing wires)
      My ComputersSystem Spec

  9. worf105's Avatar
    Posts : 2,429
    Windows 10 Pro 64-Bit (1809)
    Thread Starter
       15 May 2018 #19

    All sorted now, Noctua are sending me a new fan and all i have to do when I get it is to break a wing off the old one and photo it with the paperwork that came with the new and email them. This save sending the old one back. Great service from them.
      My ComputersSystem Spec

  10. AddRAM's Avatar
    Posts : 2,108
    Windows 7 Pro x64 Windows 10 Pro x64
       16 May 2018 #20

    Ya good thing I just stuck the broken Corsair H110i GT in the closet and didn`t chuck it.

    Worf, you are cursed
      My ComputersSystem Spec


 
Page 2 of 3 FirstFirst 123 LastLast

Related Threads
Intel DQ57TM Chassis Intrusion Warning in Installation and Upgrade
Just put a system together with the DQ57TM mobo, latest BIOS. Win 10 installed fine, but at each bootup I am confronted with a "WARNING: Chassis Intrusion" message. After a few seconds, the boot proceeds satisfactorily into Windows. In the BIOS,...
Hi folk. Its been a while since I was on here. Originally I upgraded my Win 7 to Win 10 when that option was available. The pc it was on has pretty much given up and I am replacing it with a new home build (the last one was also a home build). I...
Solved Isuue about HDD Replacement. in Drivers and Hardware
Hello, i'm new here. So here goes my issue. I have an HP 255 G3 Notebook PC with windows 10 installed and a 500 GB HDD, it works and everything (yet), but i have an internal error into the hdd and it doesnt work properly, so i want to change...
WOT (Web Of Trust) replacement in AntiVirus, Firewalls and System Security
Hi, Chrome extension WOT is probably going out of business, it has some serious privacy issues and is already removed from the Chrome Web Store. I have been using it for many years and feel lost without it. Can someone suggest a...
Solved fans in Drivers and Hardware
antec 140mm fans run normal then slow down the speed up -- could it be because no o/s installed
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 17:56.
Find Us