New
#351
Thanks guys, yeah I got one presorted - delidded - liquid metal added - and the IHS ground flat & nickel plated for better contact with the heatsink.
der8auer Core i7-8700K @ 5,0 GHz - Pro Edition | CASEKING.deDer8auer Pro Edition - Overclocker CPUs
As a special feature, the der8auer Core i7-8700K @ 5.0 GHz - Pro Edition is "delidded", ie the Integrated Heat Spreader (IHS) from Die. Subsequently, the thermal grease applied ex works is replaced by Conductonaut liquid metal thermal grease from Thermal Grizzly. This has a better thermal conductivity, so that 10 ° C to 20 ° C lower temperatures can be achieved under load.
Since the preassembled heatspreader is slightly concave, this is sanded off on the der8auer Pro Edition and then nickel-plated. This increases the contact area with the CPU cooler and the cooling capacity is slightly increased again. Before the heatspreader is reassembled, it gets an engraving with the der8auer logo as well as the pretested clock rate and the recommended core tension.
By grinding and nickel-plating the IHS, temperatures can be further reduced by 5 to 7 degrees Celsius, allowing the Pro Edition to reach approximately 15 to 27 ° C lower temperatures compared to the "floor" CPU.