Windows 10: 2017 Hardware Thread [2]

Page 91 of 107 FirstFirst ... 41818990919293101 ... LastLast
  1.    09 Dec 2017 #901

    Hi,
    @copiertech25: Bon courage to your wife and yourself.

    @TrashZone: No suitable aircooler lying about to test with ?

    Cheers,
      My ComputersSystem Spec


  2. Posts : 986
    Windows 7/64 Professional
       09 Dec 2017 #902

    Mike give RealTemp a try. It works will on all of 3 of my systems. Windows 7 and 10.

    Real Temp - CPU temperature monitoring

    Because VRM can get hot on a X79 I have the back mounted fan blowing in on the VRM across the top of the motherboard.
    When I built the computer a long time I read that some were having problems with VRM heat.
    It's been so long ago I don't remember the place I read the info.
    My X79 and X99 both have a fan from the rear of the computer case blowing on the VRM.

    Jack
    Last edited by Layback Bear; 09 Dec 2017 at 14:24.
      My ComputersSystem Spec


  3. Posts : 3,289
    3-Win-7Prox64 2-Win10Prox64
       09 Dec 2017 #903

    HI,
    The only other cpu cooler I have for x99 is the one I'm using for my x299 with the original cpu block and not the new mono block I added.
    That is a lot of work to break down and install it on the x99
    Might just buy a new loop
    Corsair RMA no telling how long that would take.

    Thinking of taking my x99 to micro center and have them flash the bios without a cpu in it :/
      My ComputersSystem Spec


  4. Posts : 3,289
    3-Win-7Prox64 2-Win10Prox64
       09 Dec 2017 #904

    Layback Bear said: View Post
    Mike give RealTemp a try. It works will on all of 3 of my systems. Windows 7 and 10.

    Real Temp - CPU temperature monitoring

    Jack
    Hi,
    Yeah I used to use realtemp but switched once I got 10 cores
    I used realtemp GT too it does show all 6 cores
    But I don't know why just got used to coretemp after it was needed for the 10 core processor

    Regardless of which is used all my x99 problems are happening in the bios so neither can be used :)
    Some thing is wrong
    I'm hoping it's just a hosed cpu cooler
    Only question is what to do about it
    I have a compatible cpu water block but need connections/ pump reservoir and hoses to use it.
    Or buy another AIO or cheaper until I can rma the h110i gt :/
      My ComputersSystem Spec


  5. Posts : 986
    Windows 7/64 Professional
       09 Dec 2017 #905

    Just before I installed Windows 10 a few days ago on my X99 Asus i updated the bios from 1401 to 1802 using the bios (update using the internet) It worked fast and flawless.
    When and if you do update the bios all the settings will go back to default.

    Look in you motherboard manual. It should tell you how to update the bios without a cpu installed.
    If it doesn't, their are a bunch of information on the internet on how to do such a thing.

    There are a bunch of videos here.

    update asus bios without cpu - YouTube


    Jack
      My ComputersSystem Spec


  6. Posts : 986
    Windows 7/64 Professional
       09 Dec 2017 #906

    This is what my Real Temp shows.

    Click image for larger version. 

Name:	Capture.PNG RealTemp.PNG 
Views:	44 
Size:	109.7 KB 
ID:	167509

    Jack
    Attached Thumbnails Attached Thumbnails Capture.PNG  
      My ComputersSystem Spec


  7. Posts : 3,289
    3-Win-7Prox64 2-Win10Prox64
       09 Dec 2017 #907

    Hi,
    Looks like my Hyper 212 evo is socket 2011-3 ready
    Intel LGA 2066 / 2011-3 / 2011 / 1150 / 1151 / 1155 / 1156 / 1366 socket
    AMD AM4 / AM3+ / AM3 / AM2+ / FM2+ / FM2 / FM1 socket
      My ComputersSystem Spec

  •    09 Dec 2017 #908

    ThrashZone said: View Post
    HI,
    The only other cpu cooler I have for x99 is the one I'm using for my x299 with the original cpu block and not the new mono block I added.
    That is a lot of work to break down and install it on the x99
    Might just buy a new loop
    Corsair RMA no telling how long that would take.

    Thinking of taking my x99 to micro center and have them flash the bios without a cpu in it :/
    What happens if you run / install Corsair Link Version: 4.9.1.23 .....which is NOT the latest version. You should be able to control the pump and cpu fan ....set them on a high setting. Just a thought, as I use this version with no issues.
      My ComputersSystem Spec


  • Posts : 3,289
    3-Win-7Prox64 2-Win10Prox64
       09 Dec 2017 #909

    HI,
    I would but x99 starts and goes straight to bios and shortly after that freezes.

    Getting ready to fire "no pun intended" up with the 212 evo finally found the correct offsets to use for 2011-3
    That was fun by the way
      My ComputersSystem Spec

  •    09 Dec 2017 #910

    New Corsair Link Version: 4.9.3.25 Released on 12/08/2017
      My ComputersSystem Spec


  •  
    Page 91 of 107 FirstFirst ... 41818990919293101 ... LastLast

    Related Threads
    2017 Hardware Thread in PC Custom Builds and Overclocking
    Well it's that time of year where we have some interesting new Hardware choices So Kaby-Lake has been released but honestly no need for it because Skylake performs pretty much the same or better at the same speed given Kaby-Lake can OC higher ...
    Source: Watch Microsoft Edge Web Summit 2017 live on Channel 9 - Microsoft Edge Dev Blog
    Read more: PlayStation at E3 2017 Game - PlayStation live.playstation.com PlayStation (@PlayStation) | Twitter See also: E3 2017 | Electronic Entertainment Expo - June 13-15, 2017 E3 Live Schedule
    Read more: E3 2017: All The EA Press Conference News From EA Play See also: E3 2017 | Electronic Entertainment Expo - June 13-15, 2017 E3 Live Schedule Also Watch from E3 2017:
    See: Microsoft Build 2017 Featured Program Guide Microsoft Build 2017 Session Catalog Build 2017 Channel 9 Windows Build 2017 - Windows app development
    Our Sites
    Site Links
    About Us
    Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

    Designer Media Ltd
    All times are GMT -5. The time now is 02:25.
    Find Us