Unigine Superposition

  1. Cliff S's Avatar
    Posts : 24,502
    Win10 Pro, Win10 Pro N, Win10 Home, Win10 Pro Insider Fast Ring, Windows 8.1 Pro, Ubuntu
       #1161

    Paul for it to work you need to have fans set to auto, and you can still set curves for two too.
    And disconnect the fan sync(?)
    Click image for larger version. 

Name:	image.png 
Views:	32 
Size:	6.0 KB 
ID:	233354

    Click image for larger version. 

Name:	image.png 
Views:	2 
Size:	50.4 KB 
ID:	233355
      My ComputersSystem Spec

  2.    #1162

    Cliff S said: View Post
    Paul for it to work you need to have fans set to auto, and you can still set curves for two too.
    And disconnect the fan sync(?)
    Click image for larger version. 

Name:	image.png 
Views:	32 
Size:	6.0 KB 
ID:	233354

    Click image for larger version. 

Name:	image.png 
Views:	2 
Size:	50.4 KB 
ID:	233355
    Interesting Cliff, so you are saying Afterburner can work with the FTW3 with all 3 fans? I will test it out tomorrow and let you know how it goes.
      My ComputersSystem Spec

  3.    #1163

    Yes with Firestorm you choose 1 to control the 2 main fans, and choose 2 to use the end fan.

    I leave it on Auto when I`m not gaming, our house is so dusty, and the pets, ohhh the pets. It stays around 36c if I`m just browsing.

    If I let them run all the time, my PC would be 1 big hair ball

    I gotta find 8 black solid PCI slot covers, all these ones with the holes in them just pull more dust in.

    Found some, and ordered 2 packs.

    5pcs/lot Black Hard Steel PCI Slot Covers Bracket w/ Screws, Full Profile Expansion Dust Filter Blanking Plate for PCI - Newegg.com
    Last edited by AddRAM; 1 Week Ago at 09:11.
      My ComputersSystem Spec

  4. Kol12's Avatar
    Posts : 1,759
    Windows 10 64 bit, 1809
       #1164

    paulpicks21 said: View Post
    The 3 fans don't work on the Zotac with Afterburner, same as the FTW3 mate. Wish they would address this in Afterburner as it's a great bit of software!
    In the latest MSI AB release notes I'm quite certain Unwinder said he will never support the EVGA iCX fan system so I guess that's that.
      My ComputerSystem Spec

  5. Cliff S's Avatar
    Posts : 24,502
    Win10 Pro, Win10 Pro N, Win10 Home, Win10 Pro Insider Fast Ring, Windows 8.1 Pro, Ubuntu
       #1165

    paulpicks21 said: View Post
    Interesting Cliff, so you are saying Afterburner can work with the FTW3 with all 3 fans? I will test it out tomorrow and let you know how it goes.
    No with Zotac
      My ComputersSystem Spec

  6. Cliff S's Avatar
    Posts : 24,502
    Win10 Pro, Win10 Pro N, Win10 Home, Win10 Pro Insider Fast Ring, Windows 8.1 Pro, Ubuntu
       #1166

    Kol12 said: View Post
    In the latest MSI AB release notes I'm quite certain Unwinder said he will never support the EVGA iCX fan system so I guess that's that.
    Exactly the asynchro iCX fan control, but temperatur sensor support is there, so for benching it can still be used, but the fans on iCX cards will all run the same speed.

    Anyway Unwinder explains thing here: RTSS 6.7.0 beta 1 | Page 98 | guru3D Forums

    From Read Me:
    Added asynchronous dual fan control support for reference design NVIDIA GeForce RTX 20x0 series graphics cards. Please take a
    note that only 100% NVIDIA reference design dual fan control implementations are supported, third party proprietary asynchronous
    fan control solutions (e.g. EVGA iCX series asynchronous fans) are not supported and will not be supported in future versions
    . The
    following asynchronous fan control functionality is available:

    o Added new “Synchronize fan speeds” button, which is allowing you to switch between synchronous and asynchronours
    fan control modes. Please take a note that new fan speed controls are available in v4 skins only, v3 and v2 skins are
    deprecated and no longer receive new functionality

    o When fan speeds synchronization is enabled, MSI Afterburner’s fan control functionality behaves exactly like in the
    previous version, i.e. both fans are running asynchronically in default hardware automatic fan speed control mode but
    become linked synchronically if you enable manual or software automatic fan speed control mode


    o When fan speeds synchronization is disabled, you may select and adjust each fan speed independently. For software
    automatic fan speed control mode independent temperature curves are also adjustable for each fan
      My ComputersSystem Spec

  7.    #1167

    New bump for Extreme

    Click image for larger version. 

Name:	10545.png 
Views:	1 
Size:	718.3 KB 
ID:	233449
      My ComputersSystem Spec

  8. Dude's Avatar
    Posts : 13,107
    Windows 10 Pro X64
    Thread Starter
       #1168

    Board updated
      My ComputerSystem Spec

  9. Cliff S's Avatar
    Posts : 24,502
    Win10 Pro, Win10 Pro N, Win10 Home, Win10 Pro Insider Fast Ring, Windows 8.1 Pro, Ubuntu
       #1169

    Oh I haven't even run this one yet since I got my 2080Ti amp extreme
    5.4GH z CPU


    Click image for larger version. 

Name:	image.jpg 
Views:	1 
Size:	268.7 KB 
ID:	233454
      My ComputersSystem Spec

  10. Dude's Avatar
    Posts : 13,107
    Windows 10 Pro X64
    Thread Starter
       #1170

    Board updated
      My ComputerSystem Spec


 

Related Threads
I've been testing my 980ti oc and everything was fine, oc was stable. But I decided to run valley again and after a while I got a bsod. This has happened ever since irregardless of oc. Re installing the driver doesn't work, even with ddu. Thanks in...
GTX 970 vs R9 390 Unigine Valley Benchmark Challenge in PC Custom Builds and Overclocking
I conducted a little benchmarking challenge with my buddies over at Google+ PC Gaming community between GTX 970 and its AMD counterpart R9 390 and I would like to share the result to those who are in the market for a mid-range GPU. If you are torn...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 12:08.
Find Us