Windows 10: Asus system tuning? Bios.

Page 2 of 3 FirstFirst 123 LastLast
  1.    08 Jan 2017 #11

    Only thing changws in my specs. are I didn't get the G-Skill keyboard & mouse. I got a Logitech Prodigy G213 and Prodigy G403 instead.Now I'm onto upgrading my Arctic Liquid Freezer 240 to a EKWB EK-XLC Predator 240 in push/pull next month.

    I just got a complex fracture and dislocation on my left ankle. Had 2 operations on it last Tuesday & Friday. Surgeon said it was the worst of both he ever treated. 1st hospital wasn't up to touching it transferred me to another hospital/
    I basically can't use my left leg for 6-8+ weeks.
    I already started physical therapy on it this morning.
    I won't be lifting this pc at least until the middle of February, as my left leg can't handle any weight on it yet..
      My System SpecsSystem Spec

  2.    08 Jan 2017 #12

    Right now I can't sit at my pc, too long. Maybe 20 minutes at a time. Then I have to lay down for a while The bones broke through my skin in 4 spots.
      My System SpecsSystem Spec

  3. essenbe's Avatar
    Posts : 7,048
    Windows 10 Enterprise and Pro/Windows 7 Enterprise/Linux Mint
       08 Jan 2017 #13

    BRKKAB, this thread was started by Skipper847, my remarks were addressing him.
      My System SpecsSystem Spec

  4.    08 Jan 2017 #14

    I'm pretty doped up now on pain killers, anti-imflammatory meds and blood thinners, so I'll be a little out of it for a few weeks.
      My System SpecsSystem Spec

  5.    10 Jan 2017 #15

    BRKKAB said: View Post
    No the 5-way Optimizatioon actually adds it's settings to the uefi/bios. It also can be set to be per-core overclock or all-cores overclock and it stresses your pc, until it crashes. You then restart your pc and it set's the last good overclock settings prior to the crash, and proceeds to check fan speeds and ram stress test, if you check the ram stress test box in it.
    It's pretty fail-safe.
    I found the Maximus VIII versions of AI Suite III to have bugs.
    The Z-170 Pro version of AI Suite III works on my Maximus VIII Hero and the bugs appear to be gone in it.
    The November, 2016 issue of Maximum PC had a cpu & video card overclocking guide in it. It had some Asus DIGI+ Power settings tweaks to add, too.
    I've got those settings going for my cpu and my Sapphire NITRO+ RX 480 overclocked higher to Video Speed:1450 and Ram Speed to 2150, using mV+60 settings and a custom fan curve.
    I use Folding@home 24/7 for a little over 6 weeks now and my pc has already earned over 12,250,000 points.
    That's with my pc being off for 4 days due to a hospital stay for a complex left ankle fracture & dislocation.
    Have no clue how many pins are holding it together, but the surgeon said I had the worst fracture he's ever fixed.
    Now, I get to re-learn how to use my left leg again.
    Fun 6-8+ weeks in my future.Atleast the 3 spots my ankle went through aren't ozzing blood now, after Friday's 2nd surgery on it.

    Ahhh ,I see no weight baring for a couple months Dude that sounds like a pretty bad fracture i see it all the time though not ankle's particularly but i see lots of fractures
      My System SpecsSystem Spec

  6.    10 Jan 2017 #16

    BRKKAB said: View Post
    I'm pretty doped up now on pain killers, anti-imflammatory meds and blood thinners, so I'll be a little out of it for a few weeks.
    I hope you get better man
      My System SpecsSystem Spec

  7.    10 Jan 2017 #17

    Yeah, it's a little bit tough now. I'll eventually get better. It may and probably will take longer due to me being a type 1 diabetic and having numerous cuts from the fracture/dislocation and the 2 surgeries..
    I think the bone only went through the right side of my ankle.
    Sunday morning when the first physical therapist came , removed the bandages/half-cast and cleaned it, I saw 4 cuts.Bottom of foot below my toes, shin, heel and right side of ankle.
    With the first surgery, when they had the rubber or ceramic piece around my ankle with 4 metal rods connected into my ankle, I only had sever pain, if I laid with the right side of my ankle on a pillow. I didn't have pain in the other 3 cuts areas I saw. Those 3 cuts must be from Friday's surgery, where they removed the first surgeries device and put the pins inside my foot, leg and ankle.
    Supposedly according to both physical therapists, my stitches should be rmove 2 weeks from the 2nd surgery and the wrapping and half-cast 6 weeks from the 2nd surgery.
    Then I get to relearn to put weight on it and use it.
    They're trying to get me a walker, as I can't get the wheelchair in my bathroom and I'll probably lose my grip sooner or later and fall, as I have to grap stuff and hop on my right leg in and out of the bathroom.
    Not fun getting to the bathroom when I can't hold my urine due to being in stage 3 kidney disease from the diabetes.
    Not fun when I can't hold my urine and it takes 2-3 minutes to get the wheelchair out of my bedroom.
    I've probably been wear 1/3 of it in my underwear and shorts each time I have to go.
    Since this fracture/dislocation happened, I've been having to go every 20-40 minutes tops. Funny part is I don't drink that many liquids and my blood sugar hasn't been too high to account for that many bathroom trips. It's definitely some sort of side effect from the dogbite, bikefall, fracture and dislocation.
      My System SpecsSystem Spec


  8. Posts : 23
    Windows 10 Pro 64bit
       10 Jan 2017 #18

    BRKKAB

    I no how you feel with not holding urine due to kidney problems. I had chronic kidney failure back in 2004. Went on dialysis for 4 years then transplant in 2008. Everything fine now though thanks to the transplant which is 9 year old in February. I remember weeing my self twice after transplant but that under control now. Hope you get everything under control.

    Any way. For overclocking then is it ok to reset default bios. Make it so XMP is enabled.

    CPU Core ratio to sync all
    1 core ratio limit 4.5
      My System SpecsSystem Spec

  9.    10 Jan 2017 #19

    Actually I set XMP in the uefi first and then ran AI Suite III's 5-way Optimazion. It left my rams DDR4 3200 XMP speed alone and overclocked my cpu (i5 6600K0 to 4.5GHz., so setting uefi to default settings, enabling XMP and pressing F10. Then give 5-way Optimization a go. Just make sure you download the version of AI Suite III for the Z170 Pro motherboard. It works on all newerZ170 Maximus VIII motherboard, too, without any bugs that the various Hero mobo's AI Suite III has. Temporarily disable your a/v while it runs and it will change the uefi settings for you. Then just do the DIGI+ 's 3 settings I listed earlier, press F10 to save and restart your pc. Then run RealBench's Stress Test on it for 1 hour. You should be good.
    I need to go for the afternoon. Windows Update to run and physical therapy on complex ankle fracture and dislocation in under 1 hour now.
      My System SpecsSystem Spec

  10.    10 Jan 2017 #20

    BRKKAB said: View Post
    Yeah, it's a little bit tough now. I'll eventually get better. It may and probably will take longer due to me being a type 1 diabetic and having numerous cuts from the fracture/dislocation and the 2 surgeries..
    I think the bone only went through the right side of my ankle.
    Sunday morning when the first physical therapist came , removed the bandages/half-cast and cleaned it, I saw 4 cuts.Bottom of foot below my toes, shin, heel and right side of ankle.
    With the first surgery, when they had the rubber or ceramic piece around my ankle with 4 metal rods connected into my ankle, I only had sever pain, if I laid with the right side of my ankle on a pillow. I didn't have pain in the other 3 cuts areas I saw. Those 3 cuts must be from Friday's surgery, where they removed the first surgeries device and put the pins inside my foot, leg and ankle.
    Supposedly according to both physical therapists, my stitches should be rmove 2 weeks from the 2nd surgery and the wrapping and half-cast 6 weeks from the 2nd surgery.
    Then I get to relearn to put weight on it and use it.
    They're trying to get me a walker, as I can't get the wheelchair in my bathroom and I'll probably lose my grip sooner or later and fall, as I have to grap stuff and hop on my right leg in and out of the bathroom.
    Not fun getting to the bathroom when I can't hold my urine due to being in stage 3 kidney disease from the diabetes.
    Not fun when I can't hold my urine and it takes 2-3 minutes to get the wheelchair out of my bedroom.
    I've probably been wear 1/3 of it in my underwear and shorts each time I have to go.
    Since this fracture/dislocation happened, I've been having to go every 20-40 minutes tops. Funny part is I don't drink that many liquids and my blood sugar hasn't been too high to account for that many bathroom trips. It's definitely some sort of side effect from the dogbite, bikefall, fracture and dislocation.

    Have you considered a portable Urinal ?
      My System SpecsSystem Spec


 
Page 2 of 3 FirstFirst 123 LastLast

Related Threads
I just bought it my first and new PC stick :cool: and I need help here :nerd: how to enter into BIOS of Asus PC Stick QM1 ? QM1 | Stick PCs | ASUS Global ;) ;)
Need help with bios for Asus laptop in Drivers and Hardware
hi, i'm trying to figure which bios i should be using from the asus website. the laptop is asus k52n running windows10 x64 pro. the current bios reads v2.13, dated 08/21/2010. the asus website has nothing listed for windows 10. there is a...
Solved Asus Bios Issue-M32BC-01 in General Support
Asus Bios issue, when I first got the PC, before I upgraded to Windows 10, I went and upgraded the Bios, but turns out I got the wrong one I think, grabbed M52BC bios, and really my machine is M32BC-01 bios, First Release 0303 mine should be on,...
I am interested to know if there is anyone that can help me with the original BIOS file (your back-up, not downloaded from the asus site) H170-PRO-ASUS-0903.CAP or above. I really apreciate it.
I am trying to get into the bios on my windows 10 system with a hero vii but whenever I restart and then hold del my screens are just black, my pc is running and nothing happens, nothing comes on the screen. If I restart and don't press anything it...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 01:23.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums