New
#291
@N00berG00ber I use the settings in Afterburber as shown in pic. Running the CPU @5Ghz when benching
@N00berG00ber I use the settings in Afterburber as shown in pic. Running the CPU @5Ghz when benching
U use any other cards bios on that MSI card?
Aside from that 5GHZ oc, I think I see what's going on. Your card has a 125% power draw while mine has 111%. Putting the fans at 100% alone consumes 20% and my clocks bounce from 2150 to 1950. All the time. Never stays stable for more than a few seconds. Damn I hate how no bios editors have come out yet for these cards.
No, I use the stock vBIOS. Everyone says to use the Curve, but I have yet to figure that out. Are you setting the power management to max performance in the Nvidia control panel too?
130% is stock on that card? Damn. I tried the curve, but I forgot to increase the voltage slider. That's probs why it crashed as soon as I opened the benchmark.
True the other 4 threads do help.
As Vellinious says just pick the spot on the curve, highlight it, hit ctrl + l keys and apply to set voltage... Max voltage on my gpu's is 1.093, but my top card is a little better than my second one
1.093v is the max voltage for all the pascal GPUs, unless you have a 1080 that can be flashed to the T4 bios, or...you have a Classy. Without adjusting the voltage slider, the most it'll run is 1.050v. Still should see 2100 with that voltage, though. If it's an average or above GPU.
I need to get the T4 bios on mine.....