Page 10 of 13 FirstFirst ... 89101112 ... LastLast
  1.    08 Nov 2015 #91
    Join Date : Mar 2014
    South Carolina, USA
    Posts : 17,207
    Windows 10 Pro 64-bit
    Thread Starter

    Nope, nothing like that. Just OC settings, which I've been using, then main board settings and eco settings.
      My ComputerSystem Spec
  2.    09 Nov 2015 #92
    Join Date : Jul 2014
    Serbia
    Posts : 10,647
    W10 Insider + Linux

    I found out that OCCT and Cinebench show most errors if anything is wrong. AMD Overdrive shows just about most accurate temp and Voltage readings. AOD shows Temperature margin, margin to max temp when CPU would start throttling as AMD doesn't have accurate temp readings no matter which program you use, specially on idle which can be ignored, only at full load it would resemble an accurate readings. Any margin 10c or higher means you're really good.
    No need to run any tests for too long, as soon as temps and voltages stabilize and a bit longer, it means it's stable enough.
      My ComputersSystem Spec
  3.    09 Nov 2015 #93

    Quote Originally Posted by essenbe View Post
    Chuck, you don't have to run Prime95. You can run something that puts enough strain on the CPU to kick it into turbo. A lot of programs will do that and not generate as much heat and strain on the components.
    Even CPU-Z has a stress CPU option. Handy for checking out what voltages are doing quickly.
      My ComputerSystem Spec
  4.    13 Nov 2015 #94
    Join Date : Nov 2015
    Posts : 29
    Windows 10 Pro 64 Bit

    I have the Intel G3258 pentium aniversary edition processor rated @ 3.2ghz, running @ 4.5ghz on a MSI Z97 PC Mate mother board with 16gb Gskill Ripjaw ram and Samsung Evo 850 256gb drive.

    I have had it as high as 4.9ghz and feel that there is much more headroom in this processor......but 4.5ghz is plenty good for what I do daily.

    dafanman
      My ComputerSystem Spec
  5.    16 Nov 2015 #95
    Join Date : Jul 2014
    Serbia
    Posts : 10,647
    W10 Insider + Linux

    A bit of improvement after installing 1866 MHz RAM. Super stable and Cinebench results jumped by 12%.
    Click image for larger version. 

Name:	CPU-Z oC.JPG 
Views:	12 
Size:	136.2 KB 
ID:	48527
      My ComputersSystem Spec
  6.    28 Nov 2015 #96
    Join Date : Aug 2015
    Posts : 28
    Windows 10

    Here's mine.

    Click image for larger version. 

Name:	Overclock.jpg 
Views:	19 
Size:	728.2 KB 
ID:	50892
      My ComputerSystem Spec
  7.    28 Nov 2015 #97
    Join Date : Jul 2014
    Serbia
    Posts : 10,647
    W10 Insider + Linux

    Quote Originally Posted by Chris635 View Post
    Here's mine.

    Click image for larger version. 

Name:	Overclock.jpg 
Views:	19 
Size:	728.2 KB 
ID:	50892
    Welcome Chris. nice OC, everything stable ? Which cooler ? Water I guess ?
      My ComputersSystem Spec
  8.    28 Nov 2015 #98
    Join Date : Aug 2015
    Posts : 28
    Windows 10

    Quote Originally Posted by CountMike View Post
    Welcome Chris. nice OC, everything stable ? Which cooler ? Water I guess ?
    Yes, it is stable. This is my daily driver. I am on a custom water loop. This system can do just over 5ghz, but my chip is a pig. It needs 1.65v to do it.
      My ComputerSystem Spec
  9.    28 Nov 2015 #99
    Join Date : Jul 2014
    Serbia
    Posts : 10,647
    W10 Insider + Linux

    Quote Originally Posted by Chris635 View Post
    Yes, it is stable. This is my daily driver. I am on a custom water loop. This system can do just over 5ghz, but my chip is a pig. It needs 1.65v to do it.
    Doubt you'd see any benefit of those couple hundred MHz. Better to be super stable than super fast. Which stepping is that processor ? Ones with 0 get best OC capabilities.
      My ComputersSystem Spec
  10.    29 Nov 2015 #100
    Join Date : Aug 2015
    Posts : 28
    Windows 10

    Quote Originally Posted by CountMike View Post
    Doubt you'd see any benefit of those couple hundred MHz. Better to be super stable than super fast. Which stepping is that processor ? Ones with 0 get best OC capabilities.
    Not sure what you mean by stepping. The 5ghz OC is stable. I just don't want to pump that much voltage constantly. You only see the difference in bench marks and single threaded apps. Boot times and app start ups are the same.
      My ComputerSystem Spec

 
Page 10 of 13 FirstFirst ... 89101112 ... LastLast

Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 11:54.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums