Show Us Your Temps

Page 15 of 37 FirstFirst ... 5131415161725 ... LastLast
  1. Hopachi's Avatar
    Posts : 952
    Windows 10 Pro 64-bit

    jk22 said: View Post
    How to change CPU frequency ?
    Go to power options:
    Control Panel\All Control Panel Items\Power Options

    Select your used power plan -> advanced power options (near the bottom).
    The maximum processor state can be set lower than 100% in this case.

    Click image for larger version. 

Name:	power.png 
Views:	79 
Size:	16.3 KB 
ID:	58123
    This means the closest clock multiplier will be used for that percentage.

    Example following the screenshot:
    If you have a, let's say, 3.00GHz processor @100%
    --> for 85% => 3.00 * 0.85 = 2.55 and if the nearest possible value on that CPU is 2.4 or 2.6GHz, that value will be used.
    Give it a try, testing the values for your needs.

    Don't set the maximum state lower than the minimum state;
    More info on CPU power options is found here:
    Power Options - Add or Remove
      My ComputersSystem Spec

  2. Stephanie's Avatar
    Posts : 15,940
    Windows 10 Professional x64

    Click image for larger version. 

Name:	43-44.jpg 
Views:	3 
Size:	56.9 KB 
ID:	58142
      My ComputerSystem Spec

  3.    #143

    Click image for larger version. 

Name:	new.jpg 
Views:	8 
Size:	829.5 KB 
ID:	58686Ive not just booted up 2 minutes ago promise
    Last edited by Archie123; 13 Jan 2016 at 16:14.
      My ComputerSystem Spec

  4. Posts : 79
    Windows 10 Pro x64 Build 14393.0 Slow Ring

    I noticed a few comments stating AMD temps are not reported correctly with Speccy, and I'm a bit confused.

    I just ran Prime 95 for 10 minutes and monitored temps using Speccy, HWMonitor and SpeedFan. All 3 programs reported identical temps throughout. Using a stock cooler, Core Temp stabilized at about 52 degrees and the socket temp about 61 degrees.

    As I understand it, HWMonitor provides clumsy information (for AMD) in that the Core Temp is reported as Temperatures - Package, while the Socket Temp is Temperatures - CPU. So, I've always paid attention to the Temperatures-Package when stress-testing.

    For SpeedFan, Core Temp is accurate and Socket Temp is Temp 1 (for me).

    Speccy CPU Temp = HWMonitor Package Temp = SpeedFan Core Temp

    Here's how they look with P95 running (bear in mind I'm taking screenshots one at a time, so the data might be a little different for each):

    Click image for larger version. 

Name:	2016_01_17_16_39_371.png 
Views:	2 
Size:	74.9 KB 
ID:	59333 Click image for larger version. 

Name:	2016_01_17_16_39_532.png 
Views:	67 
Size:	43.9 KB 
ID:	59334 Click image for larger version. 

Name:	2016_01_17_16_40_063.png 
Views:	67 
Size:	20.5 KB 
ID:	59335

    Then after shutting down P95 and at idle:

    Click image for larger version. 

Name:	2016_01_17_16_54_481.png 
Views:	2 
Size:	74.8 KB 
ID:	59342 Click image for larger version. 

Name:	2016_01_17_16_55_082.png 
Views:	67 
Size:	43.6 KB 
ID:	59343 Click image for larger version. 

Name:	2016_01_17_16_55_263.png 
Views:	67 
Size:	20.3 KB 
ID:	59344

    Now when I overclock with the stock cooler, the Core Temps readings reach 65 degrees and higher. As I understand it, going too much higher than 62 degrees is risky (although plenty of folks have done so without critical problems). I've hit Core Temps of 70+ a few times with the stock fan roaring, but only for short testing periods.

    I'm inclined to believe the Speccy temp readings are spot-on, but would appreciate any information indicating otherwise.

      My ComputerSystem Spec

  5.    #145

    My custom build
    Attached Thumbnails Attached Thumbnails speccy2.PNG   speccy.PNG  
      My ComputerSystem Spec

  6.    #146

    Oups, I already had posted that in another thread. Deleted.
    Attached Thumbnails Attached Thumbnails i7 heaven temp.jpg   i7 idle.png  
      My ComputersSystem Spec

  7. jds63's Avatar
    Posts : 3,122
    Windows 10 Pro 64 bit

    Click image for larger version. 

Name:	Untitled.jpg 
Views:	51 
Size:	58.7 KB 
ID:	63194
      My ComputerSystem Spec

  8.    #148

    Think my Graphics is high ? Machine is 8 years old,maybe need another fan.

    Click image for larger version. 

Name:	2016_02_09_00_42_431.png 
Views:	7 
Size:	63.0 KB 
ID:	63195
      My ComputerSystem Spec

  9.    #149

    Just applied some new Arctic Silver and temp is 50 C now. So it got a little better.
      My ComputerSystem Spec

  10.    #150

    Ambient temp on the right, coolant temp on the left. CPU and GPU temps obviously depend on overclock, volts and load.....which can and will vary wildly, depending on what I'm doing.

      My ComputerSystem Spec

Page 15 of 37 FirstFirst ... 5131415161725 ... LastLast

Related Threads
Show off your PC! in PC Custom Builds and Overclocking
I'm building a PC and I know that many of you here have custom built PC's. So, I though that maybe it would be nice to have a thread where you could show off your work. Just a thought, -Chuck
Show Us Your Desktop in Customization
Hello guys, Here is my community centre PC's Desktop.
Show us your Start! in Chillout Room
Show off your PC! in Chillout Room
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 19:34.
Find Us