Page 20 of 44 FirstFirst ... 10181920212230 ... LastLast
  1.    11 Feb 2017 #191
    Join Date : Feb 2015
    Bamberg Germany
    Posts : 18,001
    Win10 Pro, Win10 Pro N, Win10 Home, Win10 Pro Insider Fast Ring, Windows 8.1 Pro, Ubuntu

    Quote Originally Posted by OldMike65 View Post
    a Couple screen shots Cliff from my bios setup.
    Attachment 120777
    Attachment 120778
    Turn off offset in voltage until you find a higher OC, set it to Override.
    Like I said cache ratio should be 300MHz lower than your CPU ratio, you have CPUr: 47x and CACHEr: 46x(44 would be better, getting to close to CPUr cause instability) so when you try for 48x(4.8GHz) set CACHEr to 45

    This Multicore enhancement, what other choices do you have(so I'll know the equivalent to MSI's)You may need to raise your voltage, but do not go over 1.45(I only have 6 VRMs, but...).
    You are only looking for a stabile OC, and then can turn on all the energy saving stuff later, and that will keep the system cool.
    Make sure you only use High Performance power option when bench marking, and looking for a higher OC, but for daily use, switch to Balanced(all setting set the exact same as High Performance, just that minimum CPU freq. is set to 5%

    Also when looking for an OC turn off speedstepping(leave EIST on so Turbo Boost will work).
      My ComputersSystem Spec
  2.    11 Feb 2017 #192
    Join Date : Feb 2015
    Bamberg Germany
    Posts : 18,001
    Win10 Pro, Win10 Pro N, Win10 Home, Win10 Pro Insider Fast Ring, Windows 8.1 Pro, Ubuntu
      My ComputersSystem Spec
  3.    11 Feb 2017 #193
    Join Date : Feb 2015
    Bamberg Germany
    Posts : 18,001
    Win10 Pro, Win10 Pro N, Win10 Home, Win10 Pro Insider Fast Ring, Windows 8.1 Pro, Ubuntu

    @OldMike65, take a look here too: The Kaby Lake overclocking guide
    It's for Kaby lake, but I suspect the BIOS is about the same on the 270 boards, as they are on the 170's.
    At least my last BIOS Z170A update was to support the Kabylake chips.
    It updated me 3 BIOS higher:
    - Enhanced M.2 Genie function.
    - Improved Board Explorer function.
    - Improved NVME device compatibility.
    - Updated VBIOS and GOP.
    - Support multi graphic cards
    - Supported next generation new Intel CPU.
    - Improved PCIE compatibility.
    - Improved SAMSUNG 950 Pro NVME compatibility.
    - Updated Microcode.
    - Updated VBIOS and GOP.
    - Improved memory compatibility.
      My ComputersSystem Spec
  4.    11 Feb 2017 #194
    Join Date : Aug 2015
    Maine
    Posts : 39,835
    Windows10Pro 64Bit

    Quote Originally Posted by Cliff S View Post
    @OldMike65, take a look here too: The Kaby Lake overclocking guide
    It's for Kaby lake, but I suspect the BIOS is about the same on the 270 boards, as they are on the 170's.
    At least my last BIOS Z170A update was to support the Kabylake chips.
    It updated me 3 BIOS higher:
    - Enhanced M.2 Genie function.
    - Improved Board Explorer function.
    - Improved NVME device compatibility.
    - Updated VBIOS and GOP.
    - Support multi graphic cards
    - Supported next generation new Intel CPU.
    - Improved PCIE compatibility.
    - Improved SAMSUNG 950 Pro NVME compatibility.
    - Updated Microcode.
    - Updated VBIOS and GOP.
    - Improved memory compatibility.
    I will look at that info Cliff, do appreciate all the help and your suggestions. I am back at 4.7 GHz for the time being. A lot of the info I've been reading, so far, is things I've already done...or tried. It also could be something I've just missed too. Or this Chip ...just don't want to run at x48 Or ....something to do with my memory.
    Anyhow Cliff, just wanted to thank you.
    I'll in for a Huge snow storm starting tomorrow afternoon into Monday. 16" to 24" of snow, with wind gusts of 40 to 50 mph. Should be an interesting 2 days. Talk with ya later.
      My ComputersSystem Spec
  5.    11 Feb 2017 #195

    Quote Originally Posted by Cliff S View Post
    I just had a really bad scare!Attachment 120746

    After I turned the three cores off, and ran my last validation, I wanted to boot back into BIOS, but it showed a blank screen!Attachment 120751

    I tried both MSI Fast Boot and delete spamming, but it was always black.

    Turned the system off, turned the power switch off, held the start button for a while, no help....Attachment 120748
    Note: I had no problem booting into Windows with the single OC'd core, just couldn't get into BIOS, I though maybe a CMOS corruption, as I had made many changes at once, and that has happened before, but I could get back into BIOS and set the last good configuration.


    Needed a CMOS jumper, so went to the store where I got my machine and buy parts, but they didn't have a jumper or sell them, so he recommended, just take the battery out(a PITA on my setup)... (I left my machine unplugged during this time)

    I then went grocery shopping before coming home, turned on the machine so I could get my updated BIOS to flash after resetting, for the hell of it, I spammed delete, and....

    It went into BIOS!!!Attachment 120750

    Question: If I ever need to, can I just short the jumper pins with a small screwdriver, or is it safer/better to just take out the CMOS battery even though that's a real pain in the butt .

    Dude please Email me that
    Last edited by essenbe; 11 Feb 2017 at 22:47.
      My ComputerSystem Spec
  6.    11 Feb 2017 #196
    Join Date : Oct 2013
    Texas
    Posts : 10,994
    Windows 10 Pro X64
    Thread Starter

    Lol, his hand isn't open...thats a punch
      My ComputerSystem Spec
  7.    11 Feb 2017 #197

    Quote Originally Posted by Dude View Post
    Lol, his hand isn't open...thats a punch
    Punch or what ever that should be me right there hahahahaha

    That's the perfect Gif to make a point lmao

    See how serious his face is
      My ComputerSystem Spec
  8.    11 Feb 2017 #198
    Join Date : Oct 2013
    Texas
    Posts : 10,994
    Windows 10 Pro X64
    Thread Starter

    You are watching his face
    Last edited by essenbe; 11 Feb 2017 at 22:44.
      My ComputerSystem Spec
  9.    11 Feb 2017 #199

    Quote Originally Posted by Dude View Post
    You are watching his face
    Come on n ow you know i am that type of person that has to pinpoint every detail

    That's the Hunter S Thompson mindset lmao I think i just got the fear
    Last edited by essenbe; 11 Feb 2017 at 22:45.
      My ComputerSystem Spec
  10.    11 Feb 2017 #200
    Join Date : Oct 2013
    Texas
    Posts : 10,994
    Windows 10 Pro X64
    Thread Starter

    Sorry bro, had a few tonight
      My ComputerSystem Spec

 
Page 20 of 44 FirstFirst ... 10181920212230 ... LastLast


Similar Threads
Thread Forum
Master Leaderboard view them all
CPU OC 5618BD790EB7FD6E&resid=5618BD790EB7FD6E%2124019&authkey=APTW3zssMeT7fxI&em=2&wdAllowInteractivity=False&wdHideHeaders=True&wdDownloadButton=True 3D Mark Time Spy...
PC Custom Builds and Overclocking
Solved Have Microsoft released official Iso's for win 10 ?
Hi Giuys Have Microsoft released official Iso's for win 10 ? Ifso does anyone have the links. Thanks
Installation and Upgrade
upgrading to official Win 10 when released
I have a desktop with Win 8.1 and I am planning to put on it Win 10 TP. When the official Win 10 is released, will I be able to just update the desktop with it without reinstalling all the applications? I presume so but I would like to verify, thank...
Installation and Upgrade
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 12:13.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums