New
#21
1. Install the power supply first. Turn the switch on the power supply OFF, but leave it plugged into the power strip or wall.
Now... the whole case is ground. Just touch the case metal before you touch a part. That will discharge the static electricity, in your hand.
2. Make sure you use ALL the motherboard screws, and one and only one stand off for each screw. No more no less.
3. The LED lights are one each for the CPU, RAM, vid card and boot device (SSD). Each light should come on for about a second then go off, and the next should come on. When all four have done this... things should boot normally.
4. For hooking up the power supply to the motherboard and installing the various parts... just follow the motherboard manual.