Show off your PC!

  1.    4 Weeks Ago #1571

    @ThrashZone

    Must be a tight fit with the EVGA P2 + cables + Res + Rad+fans?
      My ComputerSystem Spec

  2.    4 Weeks Ago #1572

    ThrashZone said: View Post
    Hi,
    Added a second floor to both my cases to house a hardware labs 280 gtx rad on x299 got two the other replaces the front 280CE ek rad
    Had some left over pecan finally got around to making the frames

    Back to intake on the top rads with yes filters instead of a hard to clean exhaust through the rad freaking dust trap
    Did the same to the x99 but used the spare 280 CE that came with my 2-280 performance water loop kit so now it has 2-280mm CE rads.
    Attachment 218093
    How do u have your bottom pump mounted to the case?
      My ComputerSystem Spec

  3. ThrashZone's Avatar
    Posts : 4,268
    3-Win-7Prox64 2-Win10Prox64
       3 Weeks Ago #1573

    Kol12 said: View Post
    @ThrashZone Must be a tight fit with the EVGA P2 + cables + Res + Rad+fans?
    Hi,
    Yep 1200P2 is pretty long makes everything pretty snug
    I can barely pick up the darn case as is I can't imagine a full towers weight
    N00berG00ber said: View Post
    How do u have your bottom pump mounted to the case?
    Hi,
    Not mounted at all just sitting on the bottom of the case with some plastic sticky door bumps on the bottom of the stands feet so it doesn't vibrate.
    Just like you I just pull the pump out and tilt it to drain.
      My ComputersSystem Spec

  4.    3 Weeks Ago #1574

    ThrashZone said: View Post
    Hi,
    Yep 1200P2 is pretty long makes everything pretty snug
    I can barely pick up the darn case as is I can't imagine a full towers weight

    Hi,
    Not mounted at all just sitting on the bottom of the case with some plastic sticky door bumps on the bottom of the stands feet so it doesn't vibrate.
    Just like you I just pull the pump out and tilt it to drain.
    hmm may try some double sided tape. I wanna bolt it to the case, but where the screws would have to go are by the HDD on the other side, so I would have to buy some flat screws so it won't toush the drives. Also, the case isn't perfectly flat, so I would have to have some kind of spacers between the case and pump.
      My ComputerSystem Spec

  5. ThrashZone's Avatar
    Posts : 4,268
    3-Win-7Prox64 2-Win10Prox64
       3 Weeks Ago #1575

    Hi,
    Door bumps come in different thicknesses :)
    Nobody comes in with a level to see if my reservoirs are level
      My ComputersSystem Spec

  6.    3 Weeks Ago #1576

    Updated my setup with a speaker and a new mat for the table (That's actually a spare wallpaper lying around lol)
    Attachment 218717

    I couldn't do anything with the cable management behind but still I tried my best

    Click image for larger version. 

Name:	IMG_20181227_211654_HHT.jpg 
Views:	6 
Size:	2.09 MB 
ID:	218720
    Last edited by RoasterMen; 3 Weeks Ago at 22:33.
      My ComputerSystem Spec

  7.    3 Weeks Ago #1577

    Awesome build, better than what I could do for sure.

    Some constructive criticism if you want to make it perfect. Add some combs to your wires.

    Click image for larger version. 

Name:	Premium_Stealth_Computer_Closed_Cable_Combs_(4_Colors_&_9_Types)__19868_zoom.jpg 
Views:	69 
Size:	61.2 KB 
ID:	218776
      My ComputerSystem Spec

  8.    2 Weeks Ago #1578

    Was a little excited to get to bench testing. New NXZT case should be in early next week. Already really happy with the OC of the CPU and RAM.
    Attached Thumbnails Attached Thumbnails ADF2F3DF-8BDB-4D53-A5E5-DFE2DAAB751A.jpg   E5F8F7B7-5910-4634-B7D2-1E1C13534B6B.jpg  
      My ComputersSystem Spec

  9. ThrashZone's Avatar
    Posts : 4,268
    3-Win-7Prox64 2-Win10Prox64
       2 Weeks Ago #1579

    Hi,
    Test bench going bye-bye :)
    Looks like you still have some change left over too
      My ComputersSystem Spec

  10.    2 Weeks Ago #1580

    ThrashZone said: View Post
    Hi,
    Test bench going bye-bye :)
    Looks like you still have some change left over too
    My new case is out for delivery today! Looks like I will be up and running tonight. I just priced out some modest parts to "rebuild" the Dell and pass it along.
    Attached Thumbnails Attached Thumbnails 5675$375build.JPG  
      My ComputersSystem Spec


 

Related Threads
Show Us Your Temps in PC Custom Builds and Overclocking
I thought since a lot of us on this forum are general PC (Windows) enthusiasts, that it would be fun to compare temperatures. The specific temperature I am interested in is the CPU temp. Please provide a screenshot showing your temps. You...
Solved TechSpot SSD Show Down in Drivers and Hardware
Was reading some info on SSDs over on TechSpot, and thought I would shear. Hope you find this info hopeful when deciding on an SSD for the first time or even if just upgrading from an old one. At the top of the food chain are Samsung's SM951 and...
Show us your Start! in Chillout Room
Show off your PC! in Chillout Room
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 23:02.
Find Us