New
#1531
Nice work!
Show off your PC!
-
-
-
New #1533
Hi,
Thanks yeah never really done with these things almost settled and might hard pipe some of it
I like the pump/ res combo with soft pipe though so it will stay that way for draining....
-
New #1534
Is that one big loop thrash with two pumps, rezzies, and rads?
-
New #1535
Hi,
Only one actual reservoir unless you count the top rad as a reservoir like I do :)
A pair of hardware labs 280 gtx rads
Dual pumps look like they are doing okay separated not too many people think that is a good way to do it and instead should be directly connected to each other
Space wise that is not possible.
-
-
New #1537
How do u have your bottom pump mounted to the case?Hi,
Added a second floor to both my cases to house a hardware labs 280 gtx rad on x299 got two the other replaces the front 280CE ek rad
Had some left over pecan finally got around to making the frames
Back to intake on the top rads with yes filters
instead of a hard to clean exhaust through the rad freaking dust trap
Did the same to the x99 but used the spare 280 CE that came with my 2-280 performance water loop kit so now it has 2-280mm CE rads.
Attachment 218093
-
New #1538
Hi,
Yep 1200P2 is pretty long makes everything pretty snug
I can barely pick up the darn case as is I can't imagine a full towers weight
Hi,
Not mounted at all just sitting on the bottom of the case with some plastic sticky door bumps on the bottom of the stands feet so it doesn't vibrate.
Just like you I just pull the pump out and tilt it to drain.
-
New #1539
hmm may try some double sided tape. I wanna bolt it to the case, but where the screws would have to go are by the HDD on the other side, so I would have to buy some flat screws so it won't toush the drives. Also, the case isn't perfectly flat, so I would have to have some kind of spacers between the case and pump.Hi,
Yep 1200P2 is pretty long makes everything pretty snug
I can barely pick up the darn case as is I can't imagine a full towers weight
Hi,
Not mounted at all just sitting on the bottom of the case with some plastic sticky door bumps on the bottom of the stands feet so it doesn't vibrate.
Just like you I just pull the pump out and tilt it to drain.
-
New #1540
Hi,
Door bumps come in different thicknesses :)
Nobody comes in with a level to see if my reservoirs are level
Related Discussions
