AMD discussion

Page 7 of 93 FirstFirst ... 567891757 ... LastLast

  1. Dude
    Posts : 16,636
    Windows 11 Pro X64
    Thread Starter
       New #61

    solarstarshines said:
    You should boost higher with a lower cpu speed what is it set at ?

    you got the 200 Mhz boost which looks pretty good but remember most AMD chips shut down at 90c if i recall so getting kinda close there Bud
    Thats manual OC all core Tommy, not using boost
      My Computers
    Quote Quote

  3. solarstarshines
    Posts : 2,549
    Windows 11
       New #62

    Dude said:
    Thats manual OC all core Tommy, not using boost
    Exactly what i was saying about manual but try it the other way lock your cores in lower and see what boost you get also if possible take the side panel off apparently the air flow can be restrictive

    Since i am not up and running i am going to ask you to be the Crash Test Dummy real quick lol just don't burn it up my replacement money went on that 3950x hahaha
      My Computers
    Quote Quote

  4. Dude
    Posts : 16,636
    Windows 11 Pro X64
    Thread Starter
       New #63

    I ran with PBO and clocks were auto (38) that gives me a boost to 4550 on the first deck

    AMD discussion-hw-dimm-temps.png
      My Computers
    Quote Quote

  6. Dude
    Posts : 16,636
    Windows 11 Pro X64
    Thread Starter
       New #64

    I may be wrong but when you set your cores manually it disables Boost
      My Computers
    Quote Quote

  7. solarstarshines
    Posts : 2,549
    Windows 11
       New #65

    Dude said:
    I ran with PBO and clocks were auto (38) that gives me a boost to 4550 on the first deck

    AMD discussion-hw-dimm-temps.png
    Just what i figured now PBO is working because of the Microcode and the boost is close to advertised and on top the temps are decent
    PBO's function is to raise the clock only not the temps so my theory is sorta playing itself out now with that AGESA you just installed
      My Computers
    Quote Quote

  8. AddRAM
    Posts : 4,594
    Windows 10 Pro
       New #66

    Oh this is gonna be good !!
    AMD discussion-hackers.jpg
      My Computers
    Quote Quote

  9. solarstarshines
    Posts : 2,549
    Windows 11
       New #67

    AddRAM said:
    Oh this is gonna be good !!
    AMD discussion-hackers.jpg

    When i start this i am going to be using my 8086k

    I need to have something to use while i tear this sucker down ,I would love to buy faster ram but Geasus it cost more than my Truck note
      My Computers
    Quote Quote

  10. CountMike
    Posts : 19,517
    W11+W11 Developer Insider + Linux
       New #68

    solarstarshines said:
    Just what i figured now PBO is working because of the Microcode and the boost is close to advertised and on top the temps are decent
    PBO's function is to raise the clock only not the temps so my theory is sorta playing itself out now with that AGESA you just installed
    Is it AGESA 1006 ?
      My Computers
    Quote Quote

  12. solarstarshines
    Posts : 2,549
    Windows 11
       New #69

    CountMike said:
    Is it AGESA 1006 ?
    He posted the link I seen it but didn't see what version ocn link
      My Computers
    Quote Quote

  13. CountMike
    Posts : 19,517
    W11+W11 Developer Insider + Linux
       New #70

    solarstarshines said:
    He posted the link I seen it but didn't see what version ocn link
    Asking because AGESA code is released by AMD and it's responsible for temperature to frequency ratio. AGESA 1004abb that my BIOS has now gives core temperature too much importance and drops frequency and performance when temps cross 62c, at 71c it already drops by 100MHz from top boost frequency. 1003 wasn't that much sensitive but RAM handling wasn't great.
      My Computers
    Quote Quote

 

  Related Discussions
Looks like we need a new thread, since Macrium Reflect 8 will soon be released. Since I like to be up-to-date, I'll be updating. :-)
To AMD or to Intel - Discussion: Pros and cons
in PC Custom Builds and Overclocking

I have several aging HEDT systems (almost 4 years old), running 7th Gen HEDT CPUs. For longer than I can remember I've wanted to dump Intel. But Intel are releasing yet another 14nm CPU, without PCIe4.0 support, and where I am the prices drop...
Lots of new discussion around forced updates ...
in Windows Updates and Activation

I see new discussions of forced windows updates. I'm wondering ... where do these updates come from? What specific domain name(s)? Which specific IP address(es)?
A discussion about updating drivers
in Drivers and Hardware

I want to initiate a serious talk about updating drivers on Windows 10. Some of you use tools for updating, some of you don't recommend tools. Some of you recommend the WU version of the drivers, some of you recommend the OEM drivers and some of you...
As part of the creators update, you can create "folders" on the start menu now by dropping one application on top of another application. I do like the concept, but I sure wish that I could fire up the particular application by clicking directly...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 00:48.
Find Us




Windows 10 Forums