AMD discussion

Page 26 of 89 FirstFirst ... 1624252627283676 ... LastLast

  1. Posts : 246
    Win 11 Pro
       #251

    solarstarshines said:
    Crazy sh.. I just found my HD7970 Validation after flashing to Ghz Bios lol
    Back then i bought two at release for $625.00 out the door Diamond Tech man i loved that Brand back then
    Yeah, when AMD GPU's were relevant. Let's hope Lisa Su does something about it.
      My Computers


  2. Posts : 16,064
    Windows 11 Pro X64
    Thread Starter
       #252

      My Computers


  3. Posts : 412
    win 11 pro
       #253

    still have my 290X CFX system , paid about $400 for both cards , fine wine as well as my 108Ti !
    YouTube
    YouTube
    Last edited by Bench Virgin; 11 Jul 2020 at 20:03. Reason: updating
      My Computers


  4. Posts : 412
    win 11 pro
       #254

    5601


    CountMike said:
    Not for my MB yet, only top end MBs. Last I heard of was by end of July. Don't even know if it will be full new build or just AGESA.
    Its up now!!!
    Attached Thumbnails Attached Thumbnails AMD discussion-capture5601.png  
    Last edited by Bench Virgin; 18 Jul 2020 at 01:17. Reason: updating
      My Computers


  5. Posts : 19,208
    W11+W11 Developer Insider + Linux
       #255

    Got it thru Reddit, installed and working fine. Saved presets from 5406 are not working, gonna have to do all refining later on when I fix problem with cooling. For now only DOCP is set but not optimized, PBO is off for now.
    Somewhat because of PBO off and high temps (up to 82c under load), CB r20 score is down to 4760 instead of usual 5000+.
    Hope that those improvements are going to let me run RAM faster than now, 3600GHz and Cl16.
      My Computers


  6. Posts : 412
    win 11 pro
       #256

    All is well✔


    CountMike said:
    Got it thru Reddit, installed and working fine. Saved presets from 5406 are not working, gonna have to do all refining later on when I fix problem with cooling. For now only DOCP is set but not optimized, PBO is off for now.
    Somewhat because of PBO off and high temps (up to 82c under load), CB r20 score is down to 4760 instead of usual 5000+.
    Hope that those improvements are going to let me run RAM faster than now, 3600GHz and Cl16.
    3600 cl14 on 4 sticks, wont happen, 2 sticks all day long.

    5601 is a down grade so far with 4 sticks.

    All night testing, best so far with no errors
    Attached Thumbnails Attached Thumbnails AMD discussion-3444.png   AMD discussion-34005601.png  
    Last edited by Bench Virgin; 18 Jul 2020 at 21:55. Reason: updating
      My Computers


  7. Posts : 19,208
    W11+W11 Developer Insider + Linux
       #257

    Finally changed cooler to Arctic Liquid freezer II 240. Had all kinds of troubles with it but finally noticed that a hole in backplate (original with MB from Asus had one thread stripped and pump wasn't holding flat and tight to CPU. Replaced that one with smaller diameter screw and a nut for now, don't have decent TIM paste to do it now but will have to take everything out and drill and tap for screws of larger diameter.
    Temps were climbing to 80c+and frequency wouldn't go over 4GHz so benchmarks were dismal. Now it's still hitting 70c and goal is to keep it under 65c for best boost.
      My Computers


  8. Posts : 16,064
    Windows 11 Pro X64
    Thread Starter
       #258

    Glad you figured it out. That is a good cooler
      My Computers


  9. Posts : 19,208
    W11+W11 Developer Insider + Linux
       #259

    Dude said:
    Glad you figured it out. That is a good cooler
    Still has to be fixed.
      My Computers


  10. Posts : 2,380
    Windows 10
       #260

    CountMike said:
    Finally changed cooler to Arctic Liquid freezer II 240. Had all kinds of troubles with it but finally noticed that a hole in backplate (original with MB from Asus had one thread stripped and pump wasn't holding flat and tight to CPU. Replaced that one with smaller diameter screw and a nut for now, don't have decent TIM paste to do it now but will have to take everything out and drill and tap for screws of larger diameter.
    Temps were climbing to 80c+and frequency wouldn't go over 4GHz so benchmarks were dismal. Now it's still hitting 70c and goal is to keep it under 65c for best boost.
    With my OC through CCX i see 81c max but when i changed the settings and ran a few benches it went up to 83c

    I left CCX VID auto i normally set it right under my core voltage that is where it lightens up

    X73 Kraken is doing pretty well keeps temps within range i just worry about the liquid reaching 42c while gaming but CPU temps go from 58-62c Gaming ?????
      My Computers


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 10:53.
Find Us




Windows 10 Forums