Best Ram for X570-F Gaming with no overclock.


  1. Posts : 3
    Windows 10 Home 64bit
       #1

    Best Ram for X570-F Gaming with no overclock.


    I just bought Rog Strix X570-F Gaming and 3700x. I don't want to overclock Ram. I want every part of my pc running at stock speeds. According to Asus' site the max frequency I can get is 2666mhz if I don't want overclock Ram(right?) . So the 3200 frequency kit is not compatible with the mobo? If I want to achieve 3200mhz I have to get a lower frequency kit and overclock it?
      My ComputerSystem Spec

  2. Berton's Avatar
    Posts : 5,962
    Win10 Home and Pro, Win10 Insider Preview, WinXP Home Premium, Linux Mint, Win7 Pro
       #2

    The faster memory may work on that mobo but only at the maximum speed supported. A quote from crucial.com:
    About adding faster memory ...
    It may seem confusing, but faster memory will not necessarily make your system faster. You can't speed up your computer by adding faster memory if any of the other components in your computer (your processor or other memory modules) operate at a slower speed.
    Keep in mind, that the right memory for your computer is the kind of memory it was designed to take. Check your system manual or look up your system in the Crucial Memory Advisor or System Scanner tools to find the memory guaranteed to be 100 percent compatible or your money back!
    RAM Memory Speeds & Compatibility | Crucial.com

    As for the type of memory, DDR can't be used in place of DDR2 can't be used in place of DDR3 can't be used in place of DDR4, etc. The modules physically fit only in the slots they are designed for. Even the SODIMM for Notebooks are slightly different, have a similar notch to prevent interchanging.
      My ComputerSystem Spec

  3. kuyenmotdivad's Avatar
    Posts : 207
    Windows 10 Pro 64-bit
       #3

    Mine as got great performance, Corsair Vengeance LPX 64GB @ 3000 MHz and Iím using the same motherboard as you.
      My ComputerSystem Spec


  4. Posts : 109
    Windows 10 Pro x64
       #4

    I have the same mobo + cpu as the OP, with 4*8GB Corsair Vengeance LPX.

    The default settings gave my RAM a speed of 2133. I did a Cinebench test, then upped the freq to 3000. A CB test at 3000 was marginally lower than the score at 2133, so I switched back to default (auto) 2133.

    BTW, I actually use my pcs for Cinema 4D rendering, so the CB scores matter to me.
      My ComputerSystem Spec


  5. Posts : 3
    Windows 10 Home 64bit
    Thread Starter
       #5

    kuyenmotdivad said: View Post
    Mine as got great performance, Corsair Vengeance LPX 64GB @ 3000 MHz and Iím using the same motherboard as you.
    When you say 3000mhz you mean overclocked? Or stock dimms @3000mhz?
      My ComputerSystem Spec

  6. kuyenmotdivad's Avatar
    Posts : 207
    Windows 10 Pro 64-bit
       #6

    vSaxon said: View Post
    When you say 3000mhz you mean overclocked? Or stock dimms @3000mhz?
    There stock dimms @ 3000mhz, Iím not a fan of overclocking.
      My ComputerSystem Spec



  7. Posts : 3
    Windows 10 Home 64bit
    Thread Starter
       #7

    Thanks for your answer. Well I got 4 dimms @3200mhz. Will I have to enable the xmp profile and stuff, or it's done automatically? I don't know anything of bios settings xmp profiles etc. Will it be easy?
      My ComputerSystem Spec


  8. Posts : 1,323
    Windows 10
       #8

    "Well I got 4 dimms @3200mhz."
    That is probably just selected stock 2133 MHz chips with an overvoltage like 1.35v or 1.5v and slower latencies, and tested at those voltages and latencies.
    That is overclocking.

    However, you should note the comments in post #4, it is not just about clock speed.

    Overclocking involves overvolting which in turn increases power dissipation in the memory modules which will run hotter, this shortens life and maybe less reliable as it is being used outside of it's design spec.
    My DDR4 memory modules are 2666 MHZ at 1.2v which is what they are designed for.

    On my MOBO there is an XMP switch, no point, as the XMP profiles are same as the JEDEC/PNP profiles.

    The UEFI is extensive and no doubt you can fiddle about with voltages, latencies, frequency but why bother when the result is just not worthwhile.
      My ComputerSystem Spec

  9. kuyenmotdivad's Avatar
    Posts : 207
    Windows 10 Pro 64-bit
       #9

    vSaxon said: View Post
    Thanks for your answer. Well I got 4 dimms @3200mhz. Will I have to enable the xmp profile and stuff, or it's done automatically? I don't know anything of bios settings xmp profiles etc. Will it be easy?
    No, just plug it in should work fine, the mobo supports 3200mhz so you should not need to do anything.
      My ComputerSystem Spec


 

Related Threads
I discovered this problem with my new system. When i put the computer to sleep, he properly goes to sleep. Then when i press mouse button to wake it up, it wakes but it does not resume windows where i left it, instead its like normal boot. In the...
ASUS ROG Strix X570-F Gaming Question in PC Custom Builds and Overclocking
Hi, Iíve installed a ASUS ROG Strix X570-F Gaming motherboard and noticed on the m.2 ports each as a pad about 1cm square, should it be removed?
Power for the msi x570 gaming plus in PC Custom Builds and Overclocking
Hi i have purchased a msi x570 gaming plus. For the power connector it has a 8+4 config, do i need to run both or can i just use the 8 pin? I watched a video and they say the 4 pin doesn't need to be used. YouTube I have the corsair tx650m gold...
Post your overclock! in PC Custom Builds and Overclocking
Here you can Post your Overclocks and Benchmark results! I use an AMD FX-6300 and I was testing the MSI OC Genie on my mobo. Here's the results via CPU-Z. 17225 Nothin amazing. :rolleyes: Top Overclockers
Solved How do I overclock in PC Custom Builds and Overclocking
Hi folks, I've always wanted to know how to overclock, but everything online looked so complicated and different from my mobo. So here are some photos of what the OC section in my BIOS looks like. What should I change to get the most out of...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 06:29.
Find Us