2019 Hardware Thread

  1. OldMike65's Avatar
    Posts : 71,633
    Windows10Pro 64Bit
       #531

    Kol12 said: View Post
    New version of EVGA PX1 released, version 3.17 BETA. Hopefully the unnecessarily high CPU usage on the desktop has been fixed!!

    EVGA - Software - EVGA Precision X1
    Thanks for the heads up Kol
      My ComputersSystem Spec

  2. Kol12's Avatar
    Posts : 1,981
    Windows 10 64 bit, 1809
       #532

    OldMike65 said: View Post
    Thanks for the heads up Kol
    No worries looking forward to installing it myself.
      My ComputerSystem Spec

  3. essenbe's Avatar
    Posts : 12,006
    Windows 10 Pro 1903
       #533

    Kol12 said: View Post
    New version of EVGA PX1 released, version 3.17 BETA. Hopefully the unnecessarily high CPU usage on the desktop has been fixed!!

    EVGA - Software - EVGA Precision X1
    It claims to work on 10 series cards too.
      My ComputersSystem Spec

  4. Cliff S's Avatar
    Posts : 22,611
    Win10 Pro, Win10 Pro N, Win10 Home, Win10 Pro Insider Fast Ring, Windows 8.1 Pro, Ubuntu
    Thread Starter
       #534

    CPU Power Management Configuration
    Set CPU C state to Enabled.
    Set Enhance C1 State (previously known as C1E) to Enabled.
    Set CPU C3 Report to Enabled to allow the CPU to enter C-State C3 State when the CPU idles down.
    Set CPU C6 Report to Enabled to allow the CPU to enter C-State C6 State when the CPU idles down.
    Set C6 Latency to Short to allow the CPU to respond to C-State C6 entrance request with a relatively shorter delay.
    Set CPU C7 Report to Enabled to allow the CPU to enter C-State C7 State when the CPU idles down.
    Set C7 Latency to Short to allow the CPU to respond to C-State C7 entrance request with a relatively shorter delay.
    Set Package C-State Support to C7s to allow the system to send I/O devices to low power mode to reduce unnecessary power consumption when the system idles down.
    Note that the CPU still enters the later C-States even if the earlier C-States are disabled. However the Package C State Support won’t function unless at least one of the CPU C-States has been enabled.
    Maximus VI Power Saving & Power Tuning Guide - Republic of Gamers | ROG - Republic of Gamers Global

    Doing some research on some of ROGs UEFI settings, I came across the bit above.
    It looks as if I need to turn switch the one I highlighted(bold) from C7s to C7, as I turn of all Active State Power Management(ASPM) stuff and everything else the turns peripherals off, like USB, and disks.
    There is nothing worst then something turning off or going to sleep when you need it.

    But as I have PCIe ASPM off, I might as well change C7s to C7.
      My ComputersSystem Spec

  5. Kol12's Avatar
    Posts : 1,981
    Windows 10 64 bit, 1809
       #535

    @Cliff I've played around with C-States quite a bit and this is how my C-States are setup:

    Intel(R) SpeedStep(tm) [Enabled]Turbo Mode [Enabled]CPU C-states [Enabled]Enhanced C-states [Enabled]CPU C3 Report [Enabled]CPU C6 Report [Enabled]CPU C7 Report [CPU C7s]CPU C8 Report [Enabled]CPU C9 Report [Enabled]CPU C10 Report [Enabled]Package C State Limit [Auto]CFG Lock [Disabled]Intel(R) Speed Shift Technology [Enabled]

    What I discovered is that enabling the C3 State and downwards does not allow the CPU core frequencies to relax and actually results in more power consumption. This is the trade off for the new Speed Shift which keeps the core frequencies higher for quicker boost clock response. What do your core frequencies idle at with your current C-State config? My setup will let the cores relax to 1200-1500 MHz on average.
      My ComputerSystem Spec

  6. Cliff S's Avatar
    Posts : 22,611
    Win10 Pro, Win10 Pro N, Win10 Home, Win10 Pro Insider Fast Ring, Windows 8.1 Pro, Ubuntu
    Thread Starter
       #536

    Kol12 said: View Post
    @Cliff I've played around with C-States quite a bit and this is how my C-States are setup:

    Intel(R) SpeedStep(tm) [Enabled]Turbo Mode [Enabled]CPU C-states [Enabled]Enhanced C-states [Enabled]CPU C3 Report [Enabled]CPU C6 Report [Enabled]CPU C7 Report [CPU C7s]CPU C8 Report [Enabled]CPU C9 Report [Enabled]CPU C10 Report [Enabled]Package C State Limit [Auto]CFG Lock [Disabled]Intel(R) Speed Shift Technology [Enabled]

    What I discovered is that enabling the C3 State and downwards does not allow the CPU core frequencies to relax and actually results in more power consumption. This is the trade off for the new Speed Shift which keeps the core frequencies higher for quicker boost clock response. What do your core frequencies idle at with your current C-State config? My setup will let the cores relax to 1200-1500 MHz on average.
    Idle goes down to 800-1400(nothing open, just background stuff)
      My ComputersSystem Spec


  7. Polo6RGTI's Avatar
    Posts : 733
    Windows 10 Pro WS x64 18362.356
       #537

    HWiNFO v6.06 is available.

    Changes:
    • Added ability to change sensor graph background colors.
    • Enhanced sensor monitoring on MSI MEG X299 CREATION and other X299 series.
    • Fixed sensor monitoring on ASUS P8H77-I and P8H77-V LE.
    • Added support for monitoring of NZXT Grid+ V3 fans.
    • Enhanced support of Intel Ice Lake-SP and Snow Ridge.
    • Added reporting and monitoring of overclocking ratio limits on Intel CPUs.
    • Added preliminary support of Intel Tiger Lake.
    • Added support of Zhaoxin KaiXian CPUs.
    • Fixed identification of some vintage mainboard models.
    • Security hardening against DLL hijacking attacks.
    • Improved support of some ancient systems (Pentium-class, Windows 98, NT).
    • Improved reporting of NVIDIA SLI status.
      My ComputerSystem Spec

  8. paulpicks21's Avatar
    Posts : 949
    Windows 10 Pro
       #538

    doorules said: View Post
    For you guys still playing with 2080 ti's the KPE XOC bios can be flashed to a 2080 ti. It has no power limit and allows for voltage to exceed 1.093.

    Be careful is all I would say.
    Tried the regular kingpin 2080ti bios but something is wrong as it locks the card at 300mhz core. Shame as the 144% power target was there. Flashed back now.
      My ComputersSystem Spec

  9. doorules's Avatar
    Posts : 973
    win 10
       #539

    Have you tried the XOC bios? I think there are few over on OCN running it with some decent results.
      My ComputerSystem Spec

  10. paulpicks21's Avatar
    Posts : 949
    Windows 10 Pro
       #540

    doorules said: View Post
    Have you tried the XOC bios? I think there are few over on OCN running it with some decent results.
    Not yet mate. Will probably try it when I get some more time.
      My ComputersSystem Spec


 

Related Threads
2018 Hardware Thread [2] in PC Custom Builds and Overclocking
Continued from - 2018 Hardware Thread - Windows 10 Forums Newegg only has 1 2080 TI for sale and it isn't EVGA, Asus, MSI or Gigabyte. Nobody has stock right now. Which also make you have to ask about all the 'Little Chickens' on You Tube who...
2018 Hardware Thread in PC Custom Builds and Overclocking
Continued from: 2017 Hardware Thread - Windows 10 Forums Just a thought, maybe Steve or Shawn could create a new 2018 Hardware thread, and move our posts since Jan 1 and move all our subscriptions to it, kind of like when you do the Today...
2017 Hardware Thread [2] in PC Custom Builds and Overclocking
Continued from - 2017 Hardware Thread - Windows 10 Forums I was just watching the newest video from Gamers Nexus, and fell in love with that home made case:roflmao: 159146 By the way screenshot is 4K and makes a great wallpaper for GN fans:p
2017 Hardware Thread in PC Custom Builds and Overclocking
Well it's that time of year where we have some interesting new Hardware choices So Kaby-Lake has been released but honestly no need for it because Skylake performs pretty much the same or better at the same speed given Kaby-Lake can OC higher ...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 07:25.
Find Us