2019 Hardware Thread

HWiNFO v6.04 is available.

Changes:

• Full AMD Radeon VII monitoring support.
• Added Intel Cooper Lake and Snow Ridge.
• Improved configuration of tray icons.
• Improved support of multiple devices behind Intel VROC.
• Added monitoring of Corsair Platinum series (H100i, H115i) coolers.
• Improved AMD Zen2 support.
• Added reporting of TDC and EDC limits for AMD Zen CPUs.
• Improved detection of serial ports.
• Fixed reporting on system temperature on some MSI mainboards.
• Fixed occasional 0 RPM fan values on some systems with ITE SIOs.
• Added preliminary support of Intel Emmitsburg.
• Added preliminary support of AMD Navi.
• Added reporting of DIMM temperatures via IMC on Sandy Bridge and later server CPUs.
• Added several new CPU and GPU models.
• Minor improvements to UI and bug fixes.

Tnx, updated.

AMD CEO, Dr. Lisa Su, To Deliver Computex 2019 Opening Keynote – Will Present Ryzen 3000 CPUs, Radeon RX Navi GPUs and EPYC Rome Server Chips

In an official press release, the Taiwan External Trade Development Council has confirmed that AMD’s CEO, Dr. Lisa Su, will be presenting the Computex 2019 opening keynote on 27th May, 19. During the keynote, AMD’s President and CEO will be presenting a range of new technologies that will utilize the brand new 7nm process node.

AMD CEO To Announce 7nm Ryzen 3000 CPU Navi GPU at Computex

Was this really an April fools joke? A lot of work has gone into this to be a joke.

https://www.nvidia.com/en-us/geforce...ryName=DM36127

@paulpicks21 have you seen this article?: Glued Die on ASUS ROG Strix GeForce RTX 2080 Ti Affects Some Aftermarket Cooling Solutions | TechPowerUp

Newest DDU Download Display Driver Uninstaller - MajorGeeks

To solve the infinite boot loop issue (stuck in Safe Mode) / password lost that some users are having, you must boot with the DVD/USB (Windows installation disk) in recovery with Command prompt OR restart the computer (not the reset button) and HOLD THE SHIFT KEY until you have the advanced option menu and the option to boot with a Command prompt and type :

Option 1 (recommended) : bcdedit /deletevalue {default} safeboot

* Replace "default" with the identifier of your operation system. (can be seen when you run bcdedit)

If option 1 is not working,

Option 2 : bootrec /rebuildbcd

There may need to be some adjustement if you have a dualboot system. but if not , it should work correctly.

From my personal experience, the UXTHEME patcher was a possible cause of this.

Safe Mode may not work especially with the "Windows 10 Anniversary Update" when CSM in the bios is "Disabled". (Microsoft issue)



If DDU is not starting:
-DDU doesn't work from a network drive.
-The folder permission you have DDU install are broken, check that you have SYSTEM, Administrators and your username at Full Control.(Windows default)
-Try to install DDU on the Desktop and run it from there.
-Send the logs, if any, located within the DDU folder in the DDU Logs folder.


New driver is not installing and an old driver from windows update is getting installed by itself?
-You had the internet connected and it should be disconnnected when running DDU and until you re-install the new driver

Cliff S said:

@paulpicks21 have you seen this article?: Glued Die on ASUS ROG Strix GeForce RTX 2080 Ti Affects Some Aftermarket Cooling Solutions | TechPowerUp

Hi Cliff, no I hadn't heard about it. But I don't have plans to change the cooling on it. Thanks.

Guy's for 2019 I'm planning on doing a custom loop. I got my EK pump/res combo today. Lot's of planning to do.

Kol12 said:

Was this really an April fools joke? A lot of work has gone into this to be a joke.

https://www.nvidia.com/en-us/geforce...ryName=DM36127

Must have been a teaser for a 2040 release.