New
#331
@Cliff S have you tried setting the cache higher?
[Sammelthread] Intel Coffee Lake-R (Sockel 1151) OC-Ergebnis-Thread! KEIN Quatschthread!
Not for these testing I set AVX to 0, as I wanted to get the highest temps for the load.
Al though I usually have it at 3.
Ok this last test for 5.2GHz, I needed to set my offset to 0.270, which is 1.312V under very heavy load in Windows.
I think I'll stop here where it's stable under a heavy CPU rendering load, as the temps are getting to close.
I had to raise to 0.270 because of a BSOD in the middle of rendering.
DATA for Geeks
Here are the stats(click to pic enlarge and look at the maximum column)
Also CPU-Z
And a BIOS screenshot to show what I mean
I'm not usings adaptive Mike, I'm using Offset.
Adaptive gives waaaay to much voltage on ASUS boards(wasn't a problem on my 6700Ks MSI board)
If anyone cares, my new 24/7 OC BIOS settings for now.
I got rid of the other stuff(Like all the RAM settings & timings, and the hardware settings) to make it somewhat easier.
Ai Overclock Tuner [Manual]
BCLK Frequency [100.0000]
ASUS MultiCore Enhancement [Disabled]
SVID Behavior [Auto]
AVX Instruction Core Ratio Negative Offset [0]
CPU Core Ratio [Sync All Cores]
1-Core Ratio Limit [52]
2-Core Ratio Limit [52]
3-Core Ratio Limit [52]
4-Core Ratio Limit [52]
5-Core Ratio Limit [52]
6-Core Ratio Limit [52]
7-Core Ratio Limit [52]
8-Core Ratio Limit [52]
BCLK Frequency : DRAM Frequency Ratio [Auto]
DRAM Odd Ratio Mode [Enabled]
DRAM Frequency [DDR4-3866MHz]
Xtreme Tweaking [Enabled]
TPU [Keep Current Settings]
CPU SVID Support [Disabled]
CPU Core/Cache Current Limit Max. [255.75]
Ring Down Bin [Auto]
Min. CPU Cache Ratio [Auto]
Max CPU Cache Ratio [49]
BCLK Aware Adaptive Voltage [Disabled]
CPU Core/Cache Voltage [Offset Mode]
- Offset Mode Sign [+]
- CPU Core Voltage Offset [0.270]
DRAM Voltage [1.3500]
CPU VCCIO Voltage [Auto]
CPU System Agent Voltage [Auto]
PLL Termination Voltage [Auto]
PCH Core Voltage [Auto]
CPU Standby Voltage [Auto]
FCLK Frequency for Early Power On [Auto]
Initial BCLK Frequency [Auto]
BCLK Amplitude [Auto]
BCLK Slew Rate [Auto]
BCLK Spread Spectrum [Auto]
BCLK Frequency Slew Rate [Auto]
DRAM VTT Voltage [Auto]
VPPDDR Voltage [Auto]
DMI Voltage [Auto]
Core PLL Voltage [Auto]
Internal PLL Voltage [Auto]
GT PLL Voltage [Auto]
Ring PLL Voltage [Auto]
System Agent PLL Voltage [Auto]
Memory Controller PLL Voltage [Auto]
PLL Bandwidth [Auto]
Eventual DRAM Voltage [Auto]
Eventual CPU Standby Voltage [Auto]
Eventual PLL Termination Voltage [Auto]
Eventual DMI Voltage [Auto]
CPU Load-line Calibration [Level 6]
CPU Current Capability [140%]
CPU VRM Switching Frequency [Auto]
VRM Spread Spectrum [Disabled]
Active Frequency Mode [Disabled]
CPU Power Duty Control [T.Probe]
CPU Power Phase Control [Auto]
CPU VRM Thermal Control [Auto]
DRAM Current Capability [100%]
DRAM Switching Frequency [Auto]
CPU Core/Cache Boot Voltage [Auto]
DMI Boot Voltage [Auto]
Core PLL Boot Voltage [Auto]
CPU System Agent Boot Voltage [Auto]
CPU VCCIO Boot Voltage [Auto]
PLL Termination Boot voltage [Auto]
CPU Standby Boot Voltage [Auto]
Intel(R) SpeedStep(tm) [Enabled]
Turbo Mode [Enabled]
Long Duration Package Power Limit [4095]
Package Power Time Window [Auto]
Short Duration Package Power Limit [4095]
IA AC Load Line [Auto]
IA DC Load Line [Auto]
TVB Voltage Optimizations [Auto]
Hyper-Threading [Enabled]
Thermal Monitor [Enabled]
Maximum CPU Core Temperature [Auto]
Active Processor Cores [All]
Intel Virtualization Technology [Enabled]
Hardware Prefetcher [Enabled]
Adjacent Cache Line Prefetch [Enabled]
Boot performance mode [Auto]
SW Guard Extensions (SGX) [Software Controlled]
Tcc Offset Time Window [Auto]
Execute Disable Bit [Enabled]
SMM Code Access Check [Enabled]
SMM Use Delay Indication [Enabled]
SMM Use Block Indication [Enabled]
Intel(R) SpeedStep(tm) [Enabled]
Turbo Mode [Enabled]
CPU C-states [Enabled]
Enhanced C-states [Enabled]
CPU C3 Report [Enabled]
CPU C6 Report [Enabled]
CPU C7 Report [CPU C7s]
CPU C8 Report [Enabled]
CPU C9 Report [Enabled]
CPU C10 Report [Enabled]
Package C State Limit [Auto]
CFG Lock [Disabled]
Intel(R) Speed Shift Technology [Enabled]
That's ok, after I read your post, I went in and tried adaptive with my offset settings, and booted back into BIOS.
It didn't do anything, Vcore is still at 1.312, which is lower than my earlier 1.39(1.40 in BIOS with LLC of 7, makes 1.39 in Windows).
I guess it's one of those settings that doesn't do anything als long as you have manual of offset selected.
But it was still worth a try, if I learned something from it