2018 Hardware Thread [2]

Page 34 of 45 FirstFirst ... 24323334353644 ... LastLast
  1. OldMike65's Avatar
    Posts : 106,894
    Windows10 Pro (x64) 20H2 19042.928
       #331

    Cliff S said:
    5.1 on all cores needed a to go to 0.200 offset, and the voltage fluctuated between 1.232 & 1.248(mostly 1.248) with the Blender BMW CPU test, and didn't crash.

    The temps stayed stable around 72C until the last line and a half of rendering(last 30 seconds) and jumped to 80C on two cores.

    Not a bad btable voltage when you think I need to use 1.39V when using Manual voltage
    You also set your AVX higher ...... I like to keep mine at 0
    I think you use 3 ....if I remember right.....
      My Computers

  2. Polo6RGTI's Avatar
    Posts : 800
    Windows 10 Enterprise x64 19043.928
       #332
      My Computer

  3. Cliff S's Avatar
    Posts : 25,576
    Win10 Pro, Win10 Pro N, Win10 Home, Windows 8.1 Pro, Ubuntu
       #333

    OldMike65 said:
    You also set your AVX higher ...... I like to keep mine at 0
    I think you use 3 ....if I remember right.....
    Not for these testing I set AVX to 0, as I wanted to get the highest temps for the load.
    Al though I usually have it at 3.

    Ok this last test for 5.2GHz, I needed to set my offset to 0.270, which is 1.312V under very heavy load in Windows.

    I think I'll stop here where it's stable under a heavy CPU rendering load, as the temps are getting to close.
    I had to raise to 0.270 because of a BSOD in the middle of rendering.
    DATA for Geeks

    Here are the stats(click to pic enlarge and look at the maximum column)
    2018 Hardware Thread [2]-stabilitytest.png


    Also CPU-Z
    2018 Hardware Thread [2]-image-001.png

    And a BIOS screenshot to show what I mean
    2018 Hardware Thread [2]-181223105208.jpg
      My Computers

  4. OldMike65's Avatar
    Posts : 106,894
    Windows10 Pro (x64) 20H2 19042.928
       #334

    Cliff S said:
    Not for these testing I set AVX to 0, as I wanted to get the highest temps for the load.
    Al though I usually have it at 3.

    Ok this last test for 5.2GHz, I needed to set my offset to 0.270, which is 1.312V under very heavy load in Windows.

    I think I'll stop here where it's stable under a heavy CPU rendering load, as the temps are getting to close.
    I had to raise to 0.270 because of a BSOD in the middle of rendering.
    DATA for Geeks

    Here are the stats(click to pic enlarge and look at the maximum column)
    2018 Hardware Thread [2]-stabilitytest.png


    Also CPU-Z
    2018 Hardware Thread [2]-image-001.png

    And a BIOS screenshot to show what I mean
    2018 Hardware Thread [2]-181223105208.jpg
    Nice score with those volts.....I have not used Adaptive mode in a long time....maybe I'll play with it later...
      My Computers

  5. OldMike65's Avatar
    Posts : 106,894
    Windows10 Pro (x64) 20H2 19042.928
       #335

    Here is my score @5.0 this morning from CPU-Z
    2018 Hardware Thread [2]-myscore.png
      My Computers

  6. Cliff S's Avatar
    Posts : 25,576
    Win10 Pro, Win10 Pro N, Win10 Home, Windows 8.1 Pro, Ubuntu
       #336

    I'm not usings adaptive Mike, I'm using Offset.
    Adaptive gives waaaay to much voltage on ASUS boards(wasn't a problem on my 6700Ks MSI board)

    If anyone cares, my new 24/7 OC BIOS settings for now.
    I got rid of the other stuff(Like all the RAM settings & timings, and the hardware settings) to make it somewhat easier.

    Ai Overclock Tuner [Manual]
    BCLK Frequency [100.0000]
    ASUS MultiCore Enhancement [Disabled]
    SVID Behavior [Auto]
    AVX Instruction Core Ratio Negative Offset [0]
    CPU Core Ratio [Sync All Cores]
    1-Core Ratio Limit [52]
    2-Core Ratio Limit [52]
    3-Core Ratio Limit [52]
    4-Core Ratio Limit [52]
    5-Core Ratio Limit [52]
    6-Core Ratio Limit [52]
    7-Core Ratio Limit [52]
    8-Core Ratio Limit [52]
    BCLK Frequency : DRAM Frequency Ratio [Auto]
    DRAM Odd Ratio Mode [Enabled]
    DRAM Frequency [DDR4-3866MHz]
    Xtreme Tweaking [Enabled]
    TPU [Keep Current Settings]
    CPU SVID Support [Disabled]
    CPU Core/Cache Current Limit Max. [255.75]
    Ring Down Bin [Auto]
    Min. CPU Cache Ratio [Auto]
    Max CPU Cache Ratio [49]
    BCLK Aware Adaptive Voltage [Disabled]
    CPU Core/Cache Voltage [Offset Mode]
    - Offset Mode Sign [+]
    - CPU Core Voltage Offset [0.270]

    DRAM Voltage [1.3500]
    CPU VCCIO Voltage [Auto]
    CPU System Agent Voltage [Auto]
    PLL Termination Voltage [Auto]
    PCH Core Voltage [Auto]
    CPU Standby Voltage [Auto]

    FCLK Frequency for Early Power On [Auto]
    Initial BCLK Frequency [Auto]
    BCLK Amplitude [Auto]
    BCLK Slew Rate [Auto]
    BCLK Spread Spectrum [Auto]
    BCLK Frequency Slew Rate [Auto]
    DRAM VTT Voltage [Auto]
    VPPDDR Voltage [Auto]
    DMI Voltage [Auto]
    Core PLL Voltage [Auto]
    Internal PLL Voltage [Auto]
    GT PLL Voltage [Auto]
    Ring PLL Voltage [Auto]
    System Agent PLL Voltage [Auto]
    Memory Controller PLL Voltage [Auto]
    PLL Bandwidth [Auto]
    Eventual DRAM Voltage [Auto]
    Eventual CPU Standby Voltage [Auto]
    Eventual PLL Termination Voltage [Auto]
    Eventual DMI Voltage [Auto]


    CPU Load-line Calibration [Level 6]
    CPU Current Capability [140%]
    CPU VRM Switching Frequency [Auto]
    VRM Spread Spectrum [Disabled]
    Active Frequency Mode [Disabled]
    CPU Power Duty Control [T.Probe]
    CPU Power Phase Control [Auto]
    CPU VRM Thermal Control [Auto]
    DRAM Current Capability [100%]
    DRAM Switching Frequency [Auto]
    CPU Core/Cache Boot Voltage [Auto]
    DMI Boot Voltage [Auto]
    Core PLL Boot Voltage [Auto]
    CPU System Agent Boot Voltage [Auto]
    CPU VCCIO Boot Voltage [Auto]
    PLL Termination Boot voltage [Auto]
    CPU Standby Boot Voltage [Auto]
    Intel(R) SpeedStep(tm) [Enabled]
    Turbo Mode [Enabled]
    Long Duration Package Power Limit [4095]
    Package Power Time Window [Auto]
    Short Duration Package Power Limit [4095]
    IA AC Load Line [Auto]
    IA DC Load Line [Auto]
    TVB Voltage Optimizations [Auto]
    Hyper-Threading [Enabled]
    Thermal Monitor [Enabled]
    Maximum CPU Core Temperature [Auto]
    Active Processor Cores [All]
    Intel Virtualization Technology [Enabled]
    Hardware Prefetcher [Enabled]
    Adjacent Cache Line Prefetch [Enabled]
    Boot performance mode [Auto]
    SW Guard Extensions (SGX) [Software Controlled]
    Tcc Offset Time Window [Auto]
    Execute Disable Bit [Enabled]
    SMM Code Access Check [Enabled]
    SMM Use Delay Indication [Enabled]
    SMM Use Block Indication [Enabled]
    Intel(R) SpeedStep(tm) [Enabled]
    Turbo Mode [Enabled]
    CPU C-states [Enabled]
    Enhanced C-states [Enabled]
    CPU C3 Report [Enabled]
    CPU C6 Report [Enabled]
    CPU C7 Report [CPU C7s]
    CPU C8 Report [Enabled]
    CPU C9 Report [Enabled]
    CPU C10 Report [Enabled]
    Package C State Limit [Auto]
    CFG Lock [Disabled]
    Intel(R) Speed Shift Technology [Enabled]
      My Computers

  7. OldMike65's Avatar
    Posts : 106,894
    Windows10 Pro (x64) 20H2 19042.928
       #337

    Sorry Cliff, I ment to write Offset ....opps
      My Computers

  8. OldMike65's Avatar
    Posts : 106,894
    Windows10 Pro (x64) 20H2 19042.928
       #338

    Think I'll play with offset ...you got me curious
      My Computers

  9. Cliff S's Avatar
    Posts : 25,576
    Win10 Pro, Win10 Pro N, Win10 Home, Windows 8.1 Pro, Ubuntu
       #339

    OldMike65 said:
    Sorry Cliff, I ment to write Offset ....opps
    That's ok, after I read your post, I went in and tried adaptive with my offset settings, and booted back into BIOS.
    It didn't do anything, Vcore is still at 1.312, which is lower than my earlier 1.39(1.40 in BIOS with LLC of 7, makes 1.39 in Windows).

    I guess it's one of those settings that doesn't do anything als long as you have manual of offset selected.

    But it was still worth a try, if I learned something from it
      My Computers

  10. OldMike65's Avatar
    Posts : 106,894
    Windows10 Pro (x64) 20H2 19042.928
       #340

    Cliff S said:
    That's ok, after I read your post, I went in and tried adaptive with my offset settings, and booted back into BIOS.
    It didn't do anything, Vcore is still at 1.312, which is lower than my earlier 1.39(1.40 in BIOS with LLC of 7, makes 1.39 in Windows).

    I guess it's one of those settings that doesn't do anything als long as you have manual of offset selected.

    But it was still worth a try, if I learned something from it
    Well @5.2 its a no go for my chip .....Windows won't even take me to the desktop.....even tried increasing voltage in offset....nope.
    5.1 is as high as this chip will go.
      My Computers


 
Page 34 of 45 FirstFirst ... 24323334353644 ... LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 04:13.
Find Us




Windows 10 Forums