Windows 10: New to OC and don't know how to OC

  1.    09 Feb 2018 #1

    New to OC and don't know how to OC


    Specs down below. I want to OC my cpu to 4.5 ghz from 4.0. The thing is, i don't know if i should oc from the bios or through asrock a-tuning software that i downloaded based on my MB. Any suggestions and recommendations? Screenshots below show the menu from the software.

    Click image for larger version. 

Name:	asrock tuning 1.PNG 
Views:	3 
Size:	200.4 KB 
ID:	176239Click image for larger version. 

Name:	asrock tuning 2.PNG 
Views:	3 
Size:	180.2 KB 
ID:	176240
      My ComputerSystem Spec

  2.    09 Feb 2018 #2

    General consensus is to avoid using SW to OC, it's way better to do it in BIOS. OC software like any other SW is prone to errors and general misbehaving. My advice is always to familiarize yourself with BIOS functions first and to make sure that CMOS/BIOS reset button or pins are accessible and you know their location, you are going to need it to reset to factory defaults in case some settings are not right and it will not boot to BIOS screen.
    Simplest CPU OC usually consists of only few steps. raise CPU multiplier for higher frequency, ad appropriate voltage to it and it should speed up. Turn off all Turbo and power saving modes as they can interfere with OC process, some of them could be reinstated after quality OC is achieved.
    Other consideration is CPU and all round cooling. When you OC, CPU and other components like VRM and chipset also receive higher voltage and power and are prone to higher temperatures so proper cooling is a must. Factory coolers are calculated for normal use under normal clocks and voltages under full turbo boost but not much more and heat is your worst "enemy".
    Last but not least is "silicone lottery" for all chips, not all are made equal even with same models.
    Patience and constant checking while going up in smallest steps is the main key and may be a long process.
      My ComputersSystem Spec


  3. Posts : 10,695
    Windows 10 Pro and Windows 10 Pro Insider
       09 Feb 2018 #3

    I agree with most of what @CountMike says. Take the time to learn your BIOS and learn what the settings are and what they do. never use software to overclock, and realize there is always a risk of hardware failure when overclocking. I would second his suggestion of cooling. The stock coolers will not be sufficient. Overclocking causes excessive heat and you must be able to remove that heat. The stock coolers will not do that.
      My ComputersSystem Spec


  4. Posts : 3,267
    3-Win-7Prox64 2-Win10Prox64
       09 Feb 2018 #4

    Hi,
    You can get a walk through of your bios off this video but notice he has a nice oc mother board top of the line
    Your mother board is more of an entry level so temps will be more extreme on
    The saying goes
    If you can't afford to replace it don't overclock it
      My ComputersSystem Spec

  5.    12 Feb 2018 #5
      My ComputerSystem Spec


 

Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 16:09.
Find Us