Help overclocking my Ryzen Rig

Page 2 of 3 FirstFirst 123 LastLast
  1.    30 Jan 2018 #11

    no problem
      My ComputerSystem Spec

  2.    30 Jan 2018 #12

    CountMike said: View Post
    Ugh, that's one piss poor manual, almost nothing about BIO Settings. Did you move that dial to Performance > F10 > Save ?
    I'll check that. The dial did move 'somehere' I think when i activated OC Tuner

    Ok i moved the dial to far right and it said ASUS Optimal (but in red?) Saved and exit
      My ComputerSystem Spec

  3.    30 Jan 2018 #13

    Yep, that's first stage. Now if you look at left side there should be DOCP that's st as Disabled. If you click on down triangle, it should give you possible speeds for RAM.
      My ComputersSystem Spec

  4.    30 Jan 2018 #14

    OK CM, my son just asked me what was the new rates. checking now
      My ComputerSystem Spec

  5.    30 Jan 2018 #15

    OK , I opened DOCP and asked for profile one - the only one - and it told me this: D.O.C.P. DDR4 - 2133 13-15-15-28 - 1.2

    DOCP in advanced said same numbers.
      My ComputerSystem Spec

  6.    31 Jan 2018 #16

    You are SOL memory wise.
      My ComputersSystem Spec

  7.    31 Jan 2018 #17

    SOL? Same old language?
      My ComputerSystem Spec

  8.    31 Jan 2018 #18

    elbmek said: View Post
    SOL? Same old language?
    Yeah and other meaning too. Seriously, can't/won't you buy something faster, like 3000MHz ?
      My ComputersSystem Spec

  9.    31 Jan 2018 #19

    you'd have to explain what the 3000MHz is, MB?

    I am 68 now, I dont think its worth going sooper dooper now Thanks for all your efforts and patience. It is greatly appreciated. So, now its safe to leave my BIOS alone and let it run?

    I hope this thread helps others, the info in invaluable.
      My ComputerSystem Spec

  10.    31 Jan 2018 #20

    elbmek said: View Post
    you'd have to explain what the 3000MHz is, MB?

    I am 68 now, I dont think its worth going sooper dooper now Thanks for all your efforts and patience. It is greatly appreciated. So, now its safe to leave my BIOS alone and let it run?
    Your present RAM is made for and work at 2133MHz and new one to look for would be for 3000MHz frequency.
    BTW, I'm 70 and still like to play.
      My ComputersSystem Spec


 
Page 2 of 3 FirstFirst 123 LastLast

Related Threads
Help with overclocking Phenom II X6 in PC Custom Builds and Overclocking
Hey guys. So I know I've previously had a lot of BSOD trouble but it seems my system is stable again. The purpose of this thread is that I'd like some help to start overclocking my CPU again. Get a little more out of it, y'know? The highest OC...
RAM for Ryzen.... in PC Custom Builds and Overclocking
If you are building or planning a build with the new AM4 processors and boards you have most likely seen or heard that finding quality memory has been frustrating at best...... With all my searching and reading I came across a nice site that is a...
Overclocking FSB for the AMD 8350 in PC Custom Builds and Overclocking
So I'm working with overclocking using the FSB rather than the multiplier. In fact, I've been taking the multiplier down to keep everything "within spec." So right now I'm running at 304 FSB X 16 Multiplier with my RAM sitting at around 1292 and...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 17:06.
Find Us