1.    3 Weeks Ago #1
    Join Date : Jul 2017
    Posts : 42
    Windows 10 Professional

    I got 4 Desktop towers and a Cisco Switch I want to connect together.


    So yeah, my part of the job today was to set up 4 towers, but now that that's done, I'm trying to get them all connected together to allow for instant, offline file transfer, and it would appear I have a Cisco Model ASA5500 series "Switch" (I've been told as is,) with 4 link ports, and some console and Aux ports. Now I'd leave this work to one of my Cisco in training coworker, but unfortunately, it would appear he's off on acid or something, as his workmanship ethics have appeared to have his mind based on jumping instantly from one topic to another task. So in essence it would happen to fall onto me, and my eager assistant. So I'm posting this topic here to see if any of the more professionals here could link me to some videos or wiki help pages that one can link me to, it'd be much appreciated.
      My ComputerSystem Spec
  2.    2 Weeks Ago #2
    Join Date : Aug 2017
    Posts : 11
    Windows 10 Home 64 bit

    Hi

    I'm gonna be as much use as a chocolate firewall, but if you can pin him/her down and get yourself a copy of CISCO Packet Tracer from them via their Cisco credentials.

    Code:
    Press RETURN to get started! 
    
     
    
     %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
     
    
     %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
     
    
     %LINK-5-CHANGED: Interface FastEthernet1/1, changed state to up
     
    
     %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/1, changed state to up
     
    
     %LINK-5-CHANGED: Interface FastEthernet2/1, changed state to up
     
    
     %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet2/1, changed state to up
     
    
     %LINK-5-CHANGED: Interface FastEthernet3/1, changed state to up
     
    
     %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet3/1, changed state to up
     
    
     %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to down
     
    
     %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down
     
    
     %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
     
    
     %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
     
    
     
    
     Switch>enable
     Switch#configure terminal
     Enter configuration commands, one per line.  End with CNTL/Z.
     Switch(config)#interface FastEthernet0/1
     Switch(config-if)#
     Switch(config-if)#exit
     Switch(config)#interface FastEthernet1/1
     Switch(config-if)#
     Switch(config-if)#exit
     Switch(config)#interface FastEthernet0/1
     Switch(config-if)#
     Switch(config-if)#exit
     Switch(config)#interface FastEthernet0/1
     Switch(config-if)#

    Code:
    Press RETURN to get started! 
    
     
    
     %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
     
    
     %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
     
    
     %LINK-5-CHANGED: Interface FastEthernet1/1, changed state to up
     
    
     %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/1, changed state to up
     
    
     %LINK-5-CHANGED: Interface FastEthernet2/1, changed state to up
     
    
     %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet2/1, changed state to up
     
    
     %LINK-5-CHANGED: Interface FastEthernet3/1, changed state to up
     
    
     %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet3/1, changed state to up
     
    
     %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to down
     
    
     %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down
     
    
     %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
     
    
     %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
     
    
     
    
     Switch>enable
     Switch#configure terminal
     Enter configuration commands, one per line.  End with CNTL/Z.
     Switch(config)#interface FastEthernet0/1
     Switch(config-if)#
     Switch(config-if)#exit
     Switch(config)#interface FastEthernet1/1
     Switch(config-if)#
     Switch(config-if)#exit
     Switch(config)#interface FastEthernet0/1
     Switch(config-if)#
     Switch(config-if)#exit
     Switch(config)#interface FastEthernet0/1
     Switch(config-if)#
     Switch(config-if)#exit
     Switch(config)#interface FastEthernet4/1
     Switch(config-if)#

    Cisco Packet Tracer 7.1 : Download free labs and tutorials for CCNA certification exam preparation

      My ComputerSystem Spec

 


Similar Threads
Thread Forum
BSOD - crashed during Cisco Jabber VOIP call and Cisco WebEx Meeting
hi, i am analyzing a dump sent to me from another computer. the BSOD occurred while he was using a Cisco Jabber VOIP call and a Cisco WebEx meeting. error on screen was: “IRQL_NOT_LESS_OR_EQUAL” :mad: any further analysis of this mini-dump...
BSOD Crashes and Debugging
Solved BCDEDIT Safeboot Trouble on HP ProDesk 400 Towers
I have a method for doing safeboots on non-bootable systems. I have been primarily using Dell PCs and have no problem with any of those. Recently, I purchased two HP ProDesk 400 Towers and they work fine except for this one wrinkle. I use recdisc...
General Support
Utilizing Cisco 3550 as Layer 3 Switch
I recently acquired an older, enterprise-level, Cisco 3550 switch. Device has 24 ports and the general idea is to bypass a router (wireless or otherwise) and use this device to assign IP's on the local network. As a Layer 3 switch, I believe it does...
Network and Sharing
network adapter fails to connect after virtual switch setup.
Hello, I have setup Hyper-v on my system but once I setup the virtual switch, my network adapter no longer connects to the Wlan. when I look at network and sharing, it shows the virtual switch but not the real adapter. I followed the steps in the...
Virtualization
Virtual desktop switch
win+tab opens virtual desktop switch ... but by repeated press it again disappears instead of continuing to next desktop :/ do you know how to advance to next desktop ? by keyboard not by pointing cursor over 2nd desktop ??? (win+tab+1 .... did...
Virtualization
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 23:08.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums