Router log on

Page 1 of 2 12 LastLast

  1. ultram
    Posts : 8
    win 10
       New #1

    Router log on


    When I try to log into my Router (Netgear 7800) using 192.168.1.1 all I get is plank screen ad it says waiting and it goose no farter. Running winhome10 64bit.
      My Computer
    Quote Quote

  2. Berton
    Posts : 14,720
    Win10 Pro and Home, Win11 Pro and Home, Win7, Linux Mint
       New #2

    Are you using an Ethernet connection or Wi-Fi to access the Router? Most times the Wired connection is needed to make changes in Routers [security reasons].
      My Computers
    Quote Quote

  3. ultram
    Posts : 8
    win 10
    Thread Starter
       New #3

    I am using Ethernet connection on my desktop Computer, have the same problem with my laptop. I cant get into the Router with any Computer.
      My Computer
    Quote Quote

  4. Berton
    Posts : 14,720
    Win10 Pro and Home, Win11 Pro and Home, Win7, Linux Mint
       New #4

    Is the Router otherwise working for Network and/or Internet access? Can you open a Command Prompt [or PowerShell] window then type ipconfig to get any data from the Router? Could be the default IP address has changed. If the Router does not work there should be a 'hidden' switch [hole] on the Router you could press with a penpoint to reset it, try with the power cord disconnected and also while connected.
      My Computers
    Quote Quote

  5. ultram
    Posts : 8
    win 10
    Thread Starter
       New #5

    Berton said:
    Is the Router otherwise working for Network and/or Internet access? Can you open a Command Prompt [or PowerShell] window then type ipconfig to get any data from the Router? Could be the default IP address has changed. If the Router does not work there should be a 'hidden' switch [hole] on the Router you could press with a penpoint to reset it, try with the power cord disconnected and also while connected.
    The PowerShell dos not work, ipconfig shows it is 192.268.1.1 but I cant get into the router. The router is working as it should, I don't want to reset the Router, I don't want to have to reset all units to load the new Password????
      My Computer
    Quote Quote

  6. Samuria
    Posts : 8,564
    windows 10
       New #6

    What browser are you using and what anti virus. A lot of routers run javascript which av can block disable av or try safe modr
      My Computer
    Quote Quote

  7. tj18
    Posts : 8
    Windows 10 Pro x64
       New #7

    Try power cycling the router, before reset. Also wanted to echo the idea of possible browser issue - try using IE.
    Is it possible to access via another computer on the LAN?
      My Computer
    Quote Quote

  8. ultram
    Posts : 8
    win 10
    Thread Starter
       New #8

    tj18 said:
    Try power cycling the router, before reset. Also wanted to echo the idea of possible browser issue - try using IE.
    Is it possible to access via another computer on the LAN?
    IE 10 home, windows defender, I power cycled the Router several times, tried that with my laptop, did not work.
      My Computer
    Quote Quote

  9. tj18
    Posts : 8
    Windows 10 Pro x64
       New #9

    Hi ultram,

    Gotcha, I missed that you mentioned that earlier. Does this model let you access the admin page via http://www.routerlogin.net? How is performance on that router other than the console not loading? The device could be failing in some way, or received a bad update. Although its never fun to reconfigure, that would be my next thought. Once back to factory default settings, you would want to obtain the latest firmware.
      My Computer
    Quote Quote

  10. ultram
    Posts : 8
    win 10
    Thread Starter
       New #10

    tj18 said:
    Hi ultram,

    Gotcha, I missed that you mentioned that earlier. Does this model let you access the admin page via http://www.routerlogin.net? How is performance on that router other than the console not loading? The device could be failing in some way, or received a bad update. Although its never fun to reconfigure, that would be my next thought. Once back to factory default settings, you would want to obtain the latest firmware.
    NO cant get in ( http://www.routerlogin.net) performance is good. I can get in with Netgear Genie, but nut with http://www.routerlogin.net

    Thanks
      My Computer
    Quote Quote

 

  Related Discussions
I purchased an Arris SURFboard SBG6700-AC (modem/wifi combo) several years ago. I moved to another city with a different ISP. The cable guy could not get this to communicate with his cable system. There is an 80-year-old woman (neighbor) who has...
Hi all, this is not a problem directly related to Windows 10 but rather with my current network and router setup. I currently have my gateway router and my switch router which I have setup using a Seven Forums tutorial: Multi Router Network -...
My cable company provides a box that is a modem & router. I also use my own router attached to the cable modem. I have done nothing to the cable box except attach a cable from my router to it. Do I need to "Bridge" the cable router or can I use...
New Sky Router
in Network and Sharing

Hi i have been having a few problems with my internet connection and my service provider (Sky) posted me a new Sky Q router, by the way i don't have sky Q just the sky plus box. But before the new router arrived the problem sorted its self out, i...
First, here is my connection: I have 2 routers. The 1st one is from provider, and has USB Samba Share plugged. This router is the main one with IP 192.168.1.1. The 2nd one is in AP Mode, DHCP disabled. The IP is 192.168.1.150. Now, I have 3...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 10:22.
Find Us




Windows 10 Forums