My PC is not listed in Network

Hey TV2,
You should start a new thread for your post #5 :)

Hey wortex,
Post the results of you ipconfig /all

Seems like you've got a lot going on with that PC. I would go back to the basic, just for a sanity check :)
Do the following, if you haven't done so recently (They can take awhile :) )
Open Command Prompt as Admin
sfc /scannow
Dism /Online /Cleanup-Image /RestoreHealth

==================================================

If the firewall is inactive is this ports still blocked/open?

If the Firewall is turned off it shouldn't be blocking anything.
I'm guessing your NOT running any 3rd party firewall ?

What do i need to check on HT-PC to solve the problem? Which services need to running and which settings in regedit needs to be fullfilled?

DHCP Client - running (Startup Type - Automatic)
DNS Client - running (Startup Type - Automatic / Trigger Start)
Function Discovery Resource Publication - runnning (Startup Type - Automatic / Delayed Start)
Network Connections - running (Startup Type - Manual)
Network Location Awareness - running (Startup Type - Automatic)
Remote Procedure Call (RPC) - running (Startup Type - Automatic)
Server - running (Startup Type - Automatic)
TCP/IP Netbios helper - running (Startup Type - Manual / Trigger Start)
Workstation - running (Startup Type - Automatic)
UPnP Device Host - running (Startup Type - Manual)

Still get NetBIOS over tcpip disabled from Ipconfig /all.
NetBIOS over tcpip is enabled in properties and also in regedit in ...NetBT\Parameters\Interfaces\Tcpip {1707....} NetbiosOption = 1. I have verified correct interface by change NetBIOS Setting in WINS.

You can try and reset the tcp/ip
Open Command Prompt as Admin
netsh int ip reset c:\resetlog.txt

Hi

Ipconfig for the devide i use.

Hi Eagle51

I have done all cleanup and also the tcpip reset. Still sharing problem after restart
All firewalls are disabled and the services are configured as your list

On my HT-PC, all computers are now listed in Network list and i can se all 4 shared HT-PC folders. but when I click on one of my shared HT-PC folders under Network I get this error message during network diagnostic.

Problem found
The remote device or resource won´t accept the connection

"The divice or resource (HT-PC) is not set up to accept connections om port "The File and printer sharing (SMB)".

Do you know why?

Hey wortex,
Lets check SMB ...
1. Control Panel > Programs and Features > Turn Windows Features On or Off and make sure SMB 1.0/CIFS File Sharing Support is enable/checked.

2. Open PowserShell as Administrator run the following command and paste results
Get-SmbServerConfiguration | Select EnableSMB1Protocol, EnableSMB2Protocol

Hi Eagle51 & thanks for quick response

I am very grateful for your help

1 was not enabled. I enabled it and restarted the HT-PC, but now the HT-PC is not visible in Network list on any computer.

...then i run 2 and both was true.

Next step?

Hi again

After a couple restarts on the HT-PC it shows up in the Network list but still same problem and error message

Problem found
The remote device or resource won´t accept the connection

"The divice or resource (HT-PC) is not set up to accept connections om port "The File and printer sharing (SMB)".

And same info with ipconfig

Hi again

One step closer

Now is it possible to open HT-PC shared folders in Networklist on the HT-PC.
The HT-PC is visible on the other computer but not accessible

I got same error message on other computer in network when trying to access shared HT-PC folders

Problem found
The remote device or resource won´t accept the connection

"The divice or resource (HT-PC) is not set up to accept connections om port "The File and printer sharing (SMB)".

Have you done my post #15 on the other computer to see what it says ?

Hi

Yes on my laptop.
1 OK
2 Nothing on SMB1 and True on SMB2

The laptop can access my son Eddies computer. My HT-PC can access my laptop and Eddies computer