Windows 10: My PC is not listed in Network

Page 3 of 3 FirstFirst 123
  1.    25 Jul 2017 #21

    K, lets make sure both PCs are using the same SMB and for now we want to use SMB1 on both.

    On the laptop ...
    Open PowerShell as Administrator and run the following command
    Set-SmbServerConfiguration -EnableSMB1Protocol $true

    Then run this one and make sure both are yes
    Get-SmbServerConfiguration | Select EnableSMB1Protocol, EnableSMB2Protocol

    On both PCs ...
    Open Command Prompt as Administrator
    sc.exe config lanmanworkstation depend= bowser/mrxsmb10/mrxsmb20/nsi
    sc.exe config mrxsmb10 start= auto



    Reboot both PCs
      My ComputersSystem Spec

  2.    25 Jul 2017 #22

    Hi

    Both HT-PC and laptop had been configured with your last info.

    Then 2 restarts on both HT-PC and laptop. Now is not HT-PC visible in network list on no computer.

    When I try \\192.168.1.64 in search on laptop i get same error message with problem with SMB on HT-PC.
      My ComputerSystem Spec

  3.    25 Jul 2017 #23

    I'm still not sure why your nebios/tcpip is disable or how to fix it right now ... but since your netbios/tcpip is showing disabled in ipconfig you won't be able to use the \\192.168.1.64\ShareName ... See if \\ComputerName\ShareName works ?
      My ComputersSystem Spec

  4.    25 Jul 2017 #24

    FYI ... On the SMB stuff ...
    For now you want both SMB1 and SMB2 server/client protocols enabled on ALL PC's.
    SMB2 is preferred over SMB1 and once you get things working, you may want to disable SMB1, but you don't have to.

    The BOLD is want to you want run on each PC and you must reboot each PC for them to take effect.

    PowerShell as Administrator ...
    Get-SmbServerConfiguration | Select EnableSMB1Protocol, EnableSMB2Protocol
    If one shows No ... see the Server Commands below to enable it
    Command Prompt as Administrator ....
    sc.exe config lanmanworkstation depend= bowser/mrxsmb10/mrxsmb20/nsi
    sc.exe config mrxsmb10 start= auto
    sc.exe config mrxsmb20 start= auto

    ===============================================================

    Server Commands to be run in PowerShell as Administrator ...

    To obtain the current state of the SMB server protocol configuration, run the following cmdlet:
    Get-SmbServerConfiguration | Select EnableSMB1Protocol, EnableSMB2Protocol

    To disable SMBv1 on the SMB server, run the following cmdlet:
    Set-SmbServerConfiguration -EnableSMB1Protocol $false
    To enable SMBv1 on the SMB server, run the following cmdlet:
    Set-SmbServerConfiguration -EnableSMB1Protocol $true
    To disable SMBv2 and SMBv3 on the SMB server, run the following cmdlet:
    Set-SmbServerConfiguration -EnableSMB2Protocol $false
    To enable SMBv2 and SMBv3 on the SMB server, run the following cmdlet:
    Set-SmbServerConfiguration -EnableSMB2Protocol $true
    =============================================================

    Client Commands to run in Command Prompt as Administrator ....

    To disable SMBv1 on the SMB client, run the following commands:
    sc.exe config lanmanworkstation depend= bowser/mrxsmb20/nsi
    sc.exe config mrxsmb10 start= disabled
    To enable SMBv1 on the SMB client, run the following commands:
    sc.exe config lanmanworkstation depend= bowser/mrxsmb10/mrxsmb20/nsi
    sc.exe config mrxsmb10 start= auto

    To disable SMBv2 and SMBv3 on the SMB client, run the following commands:
    sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi
    sc.exe config mrxsmb20 start= disabled
    To enable SMBv2 and SMBv3 on the SMB client, run the following commands:
    sc.exe config lanmanworkstation depend= bowser/mrxsmb10/mrxsmb20/nsi
    sc.exe config mrxsmb20 start= auto


    Reference ... https://support.microsoft.com/en-us/...ws-and-windows
      My ComputersSystem Spec


 
Page 3 of 3 FirstFirst 123

Related Threads
I have a Dell Inspiron M731R laptop upgraded from Windows 8.1 to Windows 10 Home 64-Bit that suddenly quit connecting to the home network. Was using wireless, so switched to an Ethernet cable, but still no luck. I just discovered that ALL of the...
No Home Wifi Listed in Network and Sharing
I'm facing a problem regarding my home wifi..it's not listed on my wifi section..but when someone make a wifi hotspot through mobile data, it pick it up and listed..but not my home wifi..my computer acer aspire 4715z with broadcom 802.11g driver...
Computer not listed on 'network' in Network and Sharing
Hi Everyone I'm fairly new to windows 10 - so forgive me if the following has been asked a thousand times before.:o I have have three computers which are networked (1x 64 bit windows 10 Pro- 1x32 bit windows 10 Home Premium + 1x 32bit windows 7...
Random network printers listed in Drivers and Hardware
OK, not sure if this is the right place to post this. Please don't shoot me down if it isn't. I have the Windows 10 preview installed and went to add my printer last night, when the OS searched for it on my network it brought back a list of about...
Random network printers listed in Network and Sharing
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 20:44.
Find Us