Windows 10: Connection was already enabled but failed with error 651.

Page 5 of 6 FirstFirst ... 3456 LastLast

  1. Posts : 6,879
    Windows 10 Pro x64 Build 1709
       21 Jun 2017 #41

    I think I agree. So it was off in first run and on in second. Should be interesting seeing what "The Guy" does to fix.
      My ComputerSystem Spec

  2.    22 Jun 2017 #42

    "The Guy" has just left. He said (in Chinese) the master device on another storey does not work, but I have no idea what the device is because I had not gone with him to that storey.
      My ComputerSystem Spec

  3.    22 Jun 2017 #43

    simrick said: View Post
    I would invest in another ethernet cable, so you have a spare.
    I have a spare one now. Last week my friend gave me a used mini router with a cable, and I intend to use PowerCom Broadband via this portable router.
      My ComputerSystem Spec


  4. Posts : 6,879
    Windows 10 Pro x64 Build 1709
       22 Jun 2017 #44

    Well that is interesting. So basically a hardware failure somewhere else was preventing your connection. Thanks for sharing.

    Ken
      My ComputerSystem Spec

  5.    25 Jun 2017 #45

    My ISP had already fixed the problem.
    Today I plugged in the modem, and then I could access the Internet without doing any setting.
    It is indeed a plug-and-play device. DHCP need not settings under Windows 10.

      My ComputerSystem Spec

  6.    02 Jul 2017 #46

    simrick said: View Post
    Right now, your modem's LAN port connects to your computer. Adding a router, would look like this: Attachment 133969
    Right now, my modem's LAN port is connected to a router connected to my computer.
    Is there an IP address assigned?Click image for larger version. 

Name:	Home Broadband via router.jpg 
Views:	2 
Size:	218.0 KB 
ID:	142098

    Without the router, the status was shown in this post Connection was already enabled but failed with error 651. - Windows 10 Forums
      My ComputerSystem Spec


  7. Posts : 6,879
    Windows 10 Pro x64 Build 1709
       02 Jul 2017 #47

    Yes your computer was assigned ip address (IPv4) 192.168.0.101.

    Lots of routers hand out addresses starting at 100. There is likely something using 100, phone, printer, another computer.

    Your router address and gateway are also listed 192.168.0.1.

    The range between 2 and 99 are set aside so you can assign to specific things if required, like printers. Apple Airprint seems to work better with static IP's. It can also be specialized gear like heating controls where you use port forwarding and always needs a consistent address.

    the range from 101 to 255 is available for general household devices and phones.

    Ken
      My ComputerSystem Spec

  •    02 Jul 2017 #48

    Caledon Ken said: View Post
    There is likely something using 100, phone, printer, another computer.
    It is my phone.
    Click image for larger version. 

Name:	Screenshot_2017-07-02-22-45-49_com.android.settings.png 
Views:	2 
Size:	91.4 KB 
ID:	142133
      My ComputerSystem Spec


  • Posts : 6,879
    Windows 10 Pro x64 Build 1709
       02 Jul 2017 #49

    Perfect. So it is working just as it should. Now you can connect your printer to network and or guests.

    So routers have ssid's for Guests which means something they bring in will have a more difficult time get to your data.
      My ComputerSystem Spec

  •    18 Jul 2017 #50

    I already knew that, but it did not work in my case.
      My ComputerSystem Spec


  •  
    Page 5 of 6 FirstFirst ... 3456 LastLast

    Related Threads
    After clean install of CU, when I try to install " Asphalt 8" game I receive the above message after downloading all of 2.97 GB over a slow internet connection & downloading starts again from scratch. Where is the earlier downloaded material & is...
    Okay so after downloading the latest cumilative update, not the creators update I got this error Session "Microsoft.Windows.UniversalNotificationPlatform" failed to start with the following error: 0xC0000022. Any idea how to fix this?
    I was having some issues with Cortana on the recently released windows 10, so decided to run a SFC /Scan Now and DISM /Online /Cleanup-Image /restorehealth. DISM Failed with "Error: 0x800f081f The source files could not be found. ...
    I have an old software title that will not work on the new Win10. It seems to install OK, but when I reboot and start the program, the error message is: Failed to register the DLL's that the program requires. Is there a fix for this? The...
    About 24 percent into the Windows 10 upgrade installation from Windows 8.1, using the Windows Media Creation Tool, I get the error "Windows 10 installation has failed" error. I searched around, and found a similar post. The popup looks the same....
    Our Sites
    Site Links
    About Us
    Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

    Designer Media Ltd
    All times are GMT -5. The time now is 21:07.
    Find Us