Windows 10: Unable to See Samba Share

Page 3 of 4 FirstFirst 1234 LastLast
  1.    18 Feb 2017 #21

    The IP is within the available range. I'm not the best networking guy out there. I don't know exactly what a gateway is or how to check it for assurance.
    Click image for larger version. 

Name:	2017_02_19_00_50_331.png 
Views:	6 
Size:	86.9 KB 
ID:	121894
      My ComputerSystem Spec


  2. Posts : 632
    Win 10 Pro x64 1607 (Build 14393.953)
       18 Feb 2017 #22

    Unable to See Samba Share


    !!! PLEASE DISREGARD !!!

    1. Your Gateway IP is 192.168.1.254, so change that in the network settings for all adapters. The firmware update changed it to modem/router DEFAULT!

    OR CHANGE IT BACK TO 192.168.1.1!

    If NOT then this:

    2. Change the IP - static? - for U-server to a lower IP, or is it DHCP connecting with your router? Sometimes my own modem/router has the .253 & .254 multi-IP conflict. I have it set to its default at 192.168.1.254 IP.

    Again, just to rule things out of your issuing options.

    EDIT: used .2.1 instead of 1.1 which is the wright setting for Gateway IP!
    Last edited by M4v3r1ck; 18 Feb 2017 at 22:17.
      My ComputerSystem Spec


  3. Posts : 632
    Win 10 Pro x64 1607 (Build 14393.953)
       18 Feb 2017 #23

    Unable to See Samba Share


    !!! PLEASE DISREGARD !!!

    NOTE!:

    After each firmware update you have to manually reset the GATEWAY back to IP 192.168.1.1 because 192.168.1.254 is the DEFAULT for your modem/router.

    That's why I never change it. After I got a new modem/router due to change of ISP, I 'simply' changed all adapters to my new GATEWAY settings. Running router DEFAULT.
    Last edited by M4v3r1ck; 18 Feb 2017 at 22:17.
      My ComputerSystem Spec


  4. Posts : 632
    Win 10 Pro x64 1607 (Build 14393.953)
       18 Feb 2017 #24

    Low battery on phone, will hop to my desktop again... Unable to See Samba Share
      My ComputerSystem Spec

  5.    18 Feb 2017 #25

    I have to head out to dinner but I'll be back in a few hours. I'm still trying to wrap my head around this gateway thing. I was able to change the IP of \\LEDESMA-SERVER to 192.168.1.182 but it didn't change anything as far as my ability to connect to it from my desktop.
      My ComputerSystem Spec


  6. Posts : 632
    Win 10 Pro x64 1607 (Build 14393.953)
       18 Feb 2017 #26

    Check: what's your current GATEWAY IP atm after the firmware update? Perhaps I misread your screen.

    Open a command prompt: copy-past "ipconfig" into your command prompt.
    Last edited by M4v3r1ck; 18 Feb 2017 at 21:06.
      My ComputerSystem Spec


  7. Posts : 632
    Win 10 Pro x64 1607 (Build 14393.953)
       18 Feb 2017 #27

    noxsoldier said: View Post
    I have to head out to dinner but I'll be back in a few hours. I'm still trying to wrap my head around this gateway thing. I was able to change the IP of \\LEDESMA-SERVER to 192.168.1.182 but it didn't change anything as far as my ability to connect to it from my desktop.
    I'm in the time-zone of The Netherlands, so enjoy your dinner and perhaps I'm still insomnia by the time you get back!

    I'm sure TF will manage to tweak your issue!

    Cheers
      My ComputerSystem Spec


  • Posts : 632
    Win 10 Pro x64 1607 (Build 14393.953)
       18 Feb 2017 #28

    M4v3r1ck said: View Post
    Check: what's your current GATEWAY IP atm after the firmware update? Perhaps I misread your screen.
    Open a command prompt: copy-past "ipconfig" into your command prompt.
    For now, please disregard my posts #22 & #23!

    Check your gateway IP first please, so I can get back on track myself again.
    See quoted string above to enter after the prompt.
      My ComputerSystem Spec


  • Posts : 617
    Microsoft Windows 10 Pro 64-bit
       18 Feb 2017 #29

    On my linux (Debian) when I want to connect my Win 10 computer to an SMB running linux I run this command

    From a linux terminal:
    Code:
    service smbd stop && service nmbd stop && service smbd start && service nmbd start
    I have not figured out how to run that at every boot up yet.
      My ComputerSystem Spec


  • Posts : 632
    Win 10 Pro x64 1607 (Build 14393.953)
       19 Feb 2017 #30

    noxsoldier said: View Post
    The IP is within the available range. I'm not the best networking guy out there. I don't know exactly what a gateway is or how to check it for assurance.
    Click image for larger version. 

Name:	2017_02_19_00_50_331.png 
Views:	6 
Size:	86.9 KB 
ID:	121894
    Good day!

    In your screen we're missing some info's here. Was this screen taking right after the firmware update and reboot?

    See my settings below. I have reserved DHCP IP's to .99. From .100 to .225 are reserved IP's for my static IP from Mac - including all VM's I run / NAS / Laptop.

    Click image for larger version. 

Name:	ScreenCap 2017-02-19 at 14.11.48.jpg 
Views:	1 
Size:	70.8 KB 
ID:	121950

    As I do not know which modem/router you have, please post above screen again.

    Cheers
      My ComputerSystem Spec


  •  
    Page 3 of 4 FirstFirst 1234 LastLast

    Related Threads
    Creating a samba share in windows 10 in Network and Sharing
    I've been using unauthenticated samba share on my computer for well over a decade using windows 7, vista, and XP (and maybe even further back) to network with various devices in another room via an ethernet cable. I believe Microsoft removed...
    All, In my home network I have several computers. A Kubuntu Linux server, a windows 10 laptop and a window 8.1 desktop. Under Kubuntu I have setup several Samba shares for things like videos/photos/music, etc. From the Kubuntu side everything...
    Hey folks, I've got an issue that's been bugging me since windows 7. I've got a debian server on my network running samba and plex. I usually add media to it through samba from my windows computers. Only now with my laptop, I'm having a strange...
    Samba share doesn't work in Network and Sharing
    Hi, I have Vbox with Ubuntu Server 14.04 LTS installed on it. My host is Win 10 (Version 10.0.10240 Build 10240). I've tried to get my samba share working for the whole day. I asked in #Windows, #ubuntu, #samba, #php, everywhere. I've googled...
    BSOD mounting ISO natively from samba share in BSOD Crashes and Debugging
    To reproduce: 1) You need a network share drive on another device that is mapped locally as a drive. 2) Place an ISO image of some kind in a location on that shared drive. 3) Attempt to open the ISO natively (double-click or right click->...
    Our Sites
    Site Links
    About Us
    Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

    Designer Media Ltd
    All times are GMT -5. The time now is 21:57.
    Find Us