Windows 10: Unable to See Samba Share

Page 2 of 4 FirstFirst 1234 LastLast

  1. Posts : 632
    Win 10 Pro x64 1607 (Build 14393.953)
       18 Feb 2017 #11

    noxsoldier said: View Post
    The name of the Workgroup is LEDESMA.
    The location of the server is \\LEDESMA-SERVER
    I setup a WC for \\LEDESMA-SERVER and it didn't work. Then just to be thorough I setup one for \\LEDESMA but it didn't help
    My bad, sorry about the name.

    1. All adapter settings - Network and Sharing Settings - for your current PC the same as all others?
    2. Is it set to allow Windows to manage connections - homegroup - in Advanced Sharing Settings? Here's my settings using the Windows Credentials for my NAS server and other computer.

    Click image for larger version. 

Name:	ScreenCap 2017-02-18 at 23.21.40.jpg 
Views:	14 
Size:	90.8 KB 
ID:	121873
      My ComputerSystem Spec

  2.    18 Feb 2017 #12

    As far as I can tell, all of the settings in the "ethernet properties" are the same (when I right click the network adapter and click properties). Also, the "advanced sharing settings" are the same as yours (and all the pc's in the house have identical settings in the window you snapshotted).
      My ComputerSystem Spec


  3. Posts : 632
    Win 10 Pro x64 1607 (Build 14393.953)
       18 Feb 2017 #13

    noxsoldier said: View Post
    As far as I can tell, all of the settings in the "ethernet properties" are the same (when I right click the network adapter and click properties). Also, the "advanced sharing settings" are the same as yours (and all the pc's in the house have identical settings in the window you snapshotted).
    Checked your NetBIOS settings for your static IP on your current PC?

    Click image for larger version. 

Name:	ScreenCap 2017-02-18 at 23.54.39.jpg 
Views:	13 
Size:	67.4 KB 
ID:	121878
      My ComputerSystem Spec

  4.    18 Feb 2017 #14

    Yeah, it was enabled already.
    Attached Thumbnails Attached Thumbnails 2017_02_18_22_58_341.png  
      My ComputerSystem Spec

  5.    18 Feb 2017 #15

    Hmm, I just noticed that I cannot connect to any other computer on the network either. I get the same error trying to connect to my laptop that I do when I try to connect to the \\LEDESMA-SERVER. I don't know if that's relevant or not.
    Click image for larger version. 

Name:	2017_02_18_23_01_022.png 
Views:	6 
Size:	98.1 KB 
ID:	121882
      My ComputerSystem Spec


  6. Posts : 632
    Win 10 Pro x64 1607 (Build 14393.953)
       18 Feb 2017 #16

    noxsoldier said: View Post
    Hmm, I just noticed that I cannot connect to any other computer on the network either. I get the same error trying to connect to my laptop that I do when I try to connect to the \\LEDESMA-SERVER. I don't know if that's relevant or not.
    Try rebooting all PC's, U-server, your modem/router and when applicable any switch as well. Sometimes when I have serious network issues because of some tweaking, I do an all networked device reboot. May take some time, but just to be sure your infrastructure is working properly.

    I use the following reboot cycle for all devices:

    First start shutting down all devices in reverse cycle order from below:

    1st. Modem/router
    2nd. Switches
    3rd. Servers
    4th. PC/Mac's

    Taking a short break now, so I hope perhaps others may chime in as well. Good luck and report back here.

    Untill later, Cheers
      My ComputerSystem Spec


  7. Posts : 632
    Win 10 Pro x64 1607 (Build 14393.953)
       18 Feb 2017 #17

    Managed to perform the all networked devices shutdown and reboot?
      My ComputerSystem Spec


  • Posts : 632
    Win 10 Pro x64 1607 (Build 14393.953)
       18 Feb 2017 #18

    Unable to See Samba Share


    noxsoldier said: View Post
    Yeah, it was enabled already.
    When running a DHCP automatic IP, as you have done so in your screens, please uncheck your option and set it to Default.

    I never have used LMHOSTS myself, for my network connected devices, so can't say much about that.

    Perhaps a Windows 10 poweruser here on the forums?

    Cheers
      My ComputerSystem Spec

  •    18 Feb 2017 #19

    Ok, so my router had a firmware update so I updated that and performed the shutdown sequence you ordered, no change.

    As far as the DHCP automatic IP, you want the settings to look like this?
    Click image for larger version. 

Name:	2017_02_19_00_35_151.png 
Views:	3 
Size:	71.8 KB 
ID:	121893
      My ComputerSystem Spec


  • Posts : 632
    Win 10 Pro x64 1607 (Build 14393.953)
       18 Feb 2017 #20

    Unable to See Samba Share


    Yes, change the IP static number within the free (outside DHCP to prohibit multi IP conflicts) range - checked router settings? - you are using for your network i.e. 192.168.1.110, using all other settings alike your screen. Check router IP - Gateway - for assurance.

    Also check the "validate settings upon exit" option here. Just an extra check.
      My ComputerSystem Spec


  •  
    Page 2 of 4 FirstFirst 1234 LastLast

    Related Threads
    Creating a samba share in windows 10 in Network and Sharing
    I've been using unauthenticated samba share on my computer for well over a decade using windows 7, vista, and XP (and maybe even further back) to network with various devices in another room via an ethernet cable. I believe Microsoft removed...
    All, In my home network I have several computers. A Kubuntu Linux server, a windows 10 laptop and a window 8.1 desktop. Under Kubuntu I have setup several Samba shares for things like videos/photos/music, etc. From the Kubuntu side everything...
    Hey folks, I've got an issue that's been bugging me since windows 7. I've got a debian server on my network running samba and plex. I usually add media to it through samba from my windows computers. Only now with my laptop, I'm having a strange...
    Samba share doesn't work in Network and Sharing
    Hi, I have Vbox with Ubuntu Server 14.04 LTS installed on it. My host is Win 10 (Version 10.0.10240 Build 10240). I've tried to get my samba share working for the whole day. I asked in #Windows, #ubuntu, #samba, #php, everywhere. I've googled...
    BSOD mounting ISO natively from samba share in BSOD Crashes and Debugging
    To reproduce: 1) You need a network share drive on another device that is mapped locally as a drive. 2) Place an ISO image of some kind in a location on that shared drive. 3) Attempt to open the ISO natively (double-click or right click->...
    Our Sites
    Site Links
    About Us
    Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

    Designer Media Ltd
    All times are GMT -5. The time now is 23:44.
    Find Us