1.    01 Jul 2015 #1
    Join Date : Jul 2015
    Posts : 1
    Windows 10 - Build 10130

    Build 10158 - Network Connection Hanging


    Morning!

    My PC updated yesterday to build 10158. After it completed, I noticed that my Ethernet card seemed to hang randomly.

    The happened the first time about 15-20 minutes after the install for 10158 completed. I tried to disable the card and re-enable it but it wasn't able to. It didn't seem to detect link state either.

    I restarted, and each time the network came back but it hung again soon after the restart (between 3 and 10 minutes).

    PC: Dell Desktop XPS 8300 (2010)
    Network Card: Broadcom
    Driver: Microsoft Broadcom Driver (01/2013)

    I did a check for updated drivers (while the network was working) and it didn't locate any. I did try to download a new driver from Dell (12/2013 for Win 7 64-bit) but the card hung again.

    To correct the issues, I moved back down to 10130 and that was stable.

    I also have Visual Studio (and the default version of Hyper-V) installed, and there are two ghost cards installed for Hyper-V. Not sure if those are a factor or not.

    Guess the big question is: Has anyone else seen this in 10158, and is it fixed in 10159? Do you guys think that uninstalling the network drivers, then restarting to force a clean install might help?

    Thanks!
      My ComputerSystem Spec
  2.    01 Jul 2015 #2
    Join Date : Jul 2015
    Posts : 1
    Windows 10

    Quote Originally Posted by AmeStars View Post
    Morning!

    My PC updated yesterday to build 10158. After it completed, I noticed that my Ethernet card seemed to hang randomly.

    The happened the first time about 15-20 minutes after the install for 10158 completed. I tried to disable the card and re-enable it but it wasn't able to. It didn't seem to detect link state either.

    I restarted, and each time the network came back but it hung again soon after the restart (between 3 and 10 minutes).

    PC: Dell Desktop XPS 8300 (2010)
    Network Card: Broadcom
    Driver: Microsoft Broadcom Driver (01/2013)

    I did a check for updated drivers (while the network was working) and it didn't locate any. I did try to download a new driver from Dell (12/2013 for Win 7 64-bit) but the card hung again.

    To correct the issues, I moved back down to 10130 and that was stable.

    I also have Visual Studio (and the default version of Hyper-V) installed, and there are two ghost cards installed for Hyper-V. Not sure if those are a factor or not.

    Guess the big question is: Has anyone else seen this in 10158, and is it fixed in 10159? Do you guys think that uninstalling the network drivers, then restarting to force a clean install might help?

    Thanks!
    I have the same PC with the same problem. it was fine before build 10061 but i've have this issue in every build since 10061, hope it sorted before RTM
      My ComputerSystem Spec
  3.    02 Jul 2015 #3
    Join Date : Jul 2015
    Posts : 1
    win10 10130

    similar here. Lenovo G770 laptop... wifi completely non functional... tried for a while to figure way around it, delete drivers, reinstall drivers, etc... .... no luck.. .rolled back to prior build
    the devmgmt errors were "the device cannot start"...
      My ComputerSystem Spec
  4.    18 Jul 2015 #4
    Join Date : Oct 2014
    Posts : 16
    Windows 7 Professional / Windows 8 Pro/Windows 8.1 Pro / Windows 10 Technical Preview

    Got a different PC, but same problem (build 10162 and up).

    Geting random disconnects from internet. At first I thought it was my ethernet card fault, but after sharing mobile connection via usb and still geting random disconnects made clear that it wasn't.
    Last edited by rixto003; 18 Jul 2015 at 18:26.
      My ComputerSystem Spec

 


Similar Threads
Thread Forum
Network & Sharing Set Wireless Network as Metered or Non-Metered in Windows 10
Set Wireless Network as Metered or Non-Metered Connection in Windows 10 Internet service providers can charge by the amount of data used (the amount of data sent and received by your PC). That's called a metered Internet connection. These plans...
Tutorials
F5 VPN client "Network Access Connection - Device was not found"
Hi all - I use a F5 VPN to connect to work and have recently (IIRC) experienced issues connecting while using Win10/10130. F5 doesn't have any info. Has anyone else seen similar issues?
Network and Sharing
Surface Pro 3 - no network in 10158
I upgraded my Surface Pro 3 to build 10158 today, and I have no network. Under device manager, they are installed properly. I have tried using the Microsoft USB adapter, and the device shows as installed, but under Network Connections, no adapter...
Network and Sharing
Builds 10158 & 10159 can't access many network shares
I have a number of network shares that Win 10 no longer has permission to access. This only occurred in builds 10158 & 10159. The weird thing is that all the shares that can't be accessed are on a single machine, however, there are shares on that...
Network and Sharing
Solved How to change network connection from Public to Private?
Does anyone know how to change the network from Public to Private in build 9926? It's defaulting to Public with network discovery turned off, etc, and I'd like to change it to Private.
Network and Sharing
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 07:04.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums