1. Joined : Jun 2015
    Posts : 2
    Win 10
       30 Jun 2015 #1

    Surface Pro 3 - no network in 10158


    I upgraded my Surface Pro 3 to build 10158 today, and I have no network. Under device manager, they are installed properly. I have tried using the Microsoft USB adapter, and the device shows as installed, but under Network Connections, no adapter is visible - no wireless, USB, or dock adapter.

    Any advice is appreciated!!
      My System SpecsSystem Spec


  2. Joined : Jun 2015
    Posts : 2
    Win 10
       30 Jun 2015 #2

    I've tried installing new adapters too. The drivers all install, but the adapter doesn't show as available under network connections.
      My System SpecsSystem Spec


  3. Joined : May 2015
    Guelph
    Posts : 28
    Windos 10 TP 10122
       02 Jul 2015 #3

    Cyberius said: View Post
    I've tried installing new adapters too. The drivers all install, but the adapter doesn't show as available under network connections.
    Do you have space for a dual boot option? See if you create a 40GB partition and install a clean version there and check if the network shows up - make sure you keep a file history backup so your docs are somewhat safe.
      My System SpecsSystem Spec


  4. Joined : Jun 2015
    Posts : 37
    Windows 10
       04 Jul 2015 #4

    Can you download the driver/firmware package from MS on another PC and move the zip file over? Reinstall all the drivers.

    If you went off a "leaked" .iso someone created off an .esd file from their own install then you are more likely to run in to problems, particularly with the Surface line since the drivers and firmware are so specific (and particular). Best bet now that the official 10162 .iso is out is to to a clean install with that, or at least an upgrade (though I would go with clean, it's not that hard to get back to where you were with apps, etc. these days.)
      My System SpecsSystem Spec


  5. Joined : Jul 2015
    Posts : 3
    Windows 10
       08 Jul 2015 #5

    ixian said: View Post
    Can you download the driver/firmware package from MS on another PC and move the zip file over? Reinstall all the drivers.)

    where can i find these drivers?

    thanks,
      My System SpecsSystem Spec


  6. Joined : Jun 2015
    Posts : 37
    Windows 10
       08 Jul 2015 #6

    Download Surface software, firmware, and drivers from Official Microsoft Download Center

    Same ones for 8.1 work for 10, particularly the network stack. Once you get network going Windows update should take care of the rest.

    Though with a clean install off the public 10162 .iso - which is what you should be doing, really, with the Surface line in particular - you shouldn't have this problem, I've done installs on both my SP3 and my S3. I'm assuming you would want to move to that anyway since I can't think of any reason why you'd want to stay at 10158, particularly since many of the bug fixes between it and 10162 were for tablets/Continuum.

    Also, as I mentioned, it's freely available from Microsoft to anyone, you don't need to resort to any tricks to get it And you'll be a in a good position to get the next build, rumored to be the RTM, rumored to be this week.
      My System SpecsSystem Spec


  7. Joined : Jul 2015
    Posts : 3
    Windows 10
       08 Jul 2015 #7

    Thanks, I may just wait until the next build is out. I have 10162 on my surface and it works fine. I may just leave my xps on 10158 until the next build and then do a clean install. Thanks for your help.
      My System SpecsSystem Spec


  8. Joined : Jun 2015
    Posts : 37
    Windows 10
       08 Jul 2015 #8

    gvannoy said: View Post
    Thanks, I may just wait until the next build is out. I have 10162 on my surface and it works fine. I may just leave my xps on 10158 until the next build and then do a clean install. Thanks for your help.
    Didn't notice you were another poster - I was responding to the OP who was missing the network driver for his Surface Those are hard to find outside Windows Update or the Microsoft package I linked to.
      My System SpecsSystem Spec


 


Similar Threads
Thread Forum
Build 10158 - Network Connection Hanging
Morning! My PC updated yesterday to build 10158. After it completed, I noticed that my Ethernet card seemed to hang randomly. The happened the first time about 15-20 minutes after the install for 10158 completed. I tried to disable the card...
Network and Sharing
Builds 10158 & 10159 can't access many network shares
I have a number of network shares that Win 10 no longer has permission to access. This only occurred in builds 10158 & 10159. The weird thing is that all the shares that can't be accessed are on a single machine, however, there are shares on that...
Network and Sharing
10158
I lost all favs
Installation and Setup
No longer see Network Attached Storage in Network View on Build 10049
I can no longer see my Network Attached Storage in this build(10049) Enterprise. I have Network Discovery enabled and can get to the device by IP Address in a browser but am unable to map a drive to any share. Anyone else having these issues. I have...
Network and Sharing
Surface The Surface family expands with the Surface 3
Source: http://blogs.windows.com/bloggingwindows/2015/03/31/the-surface-family-expands-with-the-surface-3/ See also: http://blog.surface.com/2015/03/announcing-surface-3/
Windows 10 News
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:56.
Find Us
Twitter Facebook Google+



Windows 10 Forums