Windows 10: I have to boot up and then restart in order to get internet connection

  1.    01 Jan 2017 #1

    I have to boot up and then restart in order to get internet connection


    The first time I boot up everything goes well, except the internet icon has a red x on it and a message that says "no internet connectivity and none available". I then restart the computer and it boots up the same as the first time, except I now have an internet connection. It has been doing this off and on for a while, sometimes possibly to an update and sometimes to whatever and I have lived with it. However, if someone has a solution to this problem I would certainly appreciate knowing it. If a registry change is required-I am comfortable doing that.
      My System SpecsSystem Spec

  2.    01 Jan 2017 #2

    When you boot first time open and prompt type ipconfig /all then ipconfig /renew post results does the network show in device manager is it wireless or cable
      My System SpecsSystem Spec

  3.    02 Jan 2017 #3

    Sorry for delay in answering but had company


    I did run the ipconfig command as you suggested on both the non internet connection and the restart internet connection. I also saved them as attachments, but not sure how large an image is allowed on this forum.

    The non internet connection does show in the Device Manager and it is an Ethernet connection, but it has a triangle on the Network indicating some sort of problem.

    Hope this provides some of the info that you need. If I need to send the ipconfig shots I am not sure how to do that or what the maximum size should be.

    Thanks so much for your reply and hopefully it can be solved, but if not I reckon I can live with it.
      My System SpecsSystem Spec

  4.    02 Jan 2017 #4

    You can copy and paste get from cmd prompt as txt menu top left mark then copy
      My System SpecsSystem Spec

  5.    02 Jan 2017 #5

    Here are the connected and non-connected ipconfigs.


    Hi Samuria

    This is the ipconfig for the internet connection.

    Microsoft Windows [Version 10.0.14393]
    (c) 2016 Microsoft Corporation. All rights reserved.

    C:\Users\ElmerHSeale>ipconfig

    Windows IP Configuration


    Ethernet adapter Ethernet:

    Connection-specific DNS Suffix . : roc.mn.charter.com
    IPv6 Address. . . . . . . . . . . : 2002:42bc:90ad:0:fc3a:12a:2443:760
    Temporary IPv6 Address. . . . . . : 2002:42bc:90ad:0:1c07:d3d8:a447:85a6
    Link-local IPv6 Address . . . . . : fe80::fc3a:12a:2443:760%3
    IPv4 Address. . . . . . . . . . . : 192.168.1.138
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . : fe80::6a7f:74ff:fec6:c549%3
    192.168.1.1

    Ethernet adapter Ethernet 2:

    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :

    Tunnel adapter isatap.roc.mn.charter.com:

    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . : roc.mn.charter.com

    Tunnel adapter Local Area Connection* 10:

    Connection-specific DNS Suffix . :
    IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e76:10fe:3e48:bd43:6f52
    Link-local IPv6 Address . . . . . : fe80::10fe:3e48:bd43:6f52%6
    Default Gateway . . . . . . . . . :

    C:\Users\ElmerHSeale>

    This is the ipconfig for the non-connected internet connection. I hope that this is what you were asking for. Thanks again for all your help-it is greatly appreciated.

    Microsoft Windows [Version 10.0.14393]
    (c) 2016 Microsoft Corporation. All rights reserved.

    C:\Users\ElmerHSeale>ipconfig

    Windows IP Configuration


    Ethernet adapter Ethernet 2:

    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :

    C:\Users\ElmerHSeale>
      My System SpecsSystem Spec

  6.    03 Jan 2017 #6

    My apologies to you Samurai


    I posted the wrong ipconfigs that you asked for originally, the ipconfig/all and the ipconfig/renew, so I will now post the correct ones. It seems like as though I have two MBRs for some reason or the other. I am almost tempted to remove the non-connected one, AFTER I have made a full backup, but that might not be wise to do. I reckon I don't know what to do. I hope that you do.

    Here is the ipconfig/all


    Microsoft Windows [Version 10.0.14393]
    (c) 2016 Microsoft Corporation. All rights reserved.

    C:\Users\ElmerHSeale>ipconfig/all

    Windows IP Configuration

    Host Name . . . . . . . . . . . . : ElmerHSeale-PC
    Primary Dns Suffix . . . . . . . :
    Node Type . . . . . . . . . . . . : Hybrid
    IP Routing Enabled. . . . . . . . : No
    WINS Proxy Enabled. . . . . . . . : No

    Ethernet adapter Ethernet 2:

    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Kaspersky Security Data Escort Adapter
    Physical Address. . . . . . . . . : 00-FF-D2-E3-C8-80
    DHCP Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes

    C:\Users\ElmerHSeale>

    Here is the ipconfig/renew

    Microsoft Windows [Version 10.0.14393]
    (c) 2016 Microsoft Corporation. All rights reserved.

    C:\Users\ElmerHSeale>ipconfig/renew

    Windows IP Configuration

    No operation can be performed on Ethernet 2 while it has its media disconnected.

    C:\Users\ElmerHSeale>ipconfig/renew

    Windows IP Configuration

    No operation can be performed on Ethernet 2 while it has its media disconnected.

    C:\Users\ElmerHSeale>
      My System SpecsSystem Spec

  7.    03 Jan 2017 #7

    It seems from that the network card disapears next time goto device manager and click refresh see if it comes back that way is this a built in to motherboard card?
      My System SpecsSystem Spec

  8.    03 Jan 2017 #8

    Unless I am overlooking the possibility


    I cannot find any option in the Device Manager to refresh the Network Adapter. Also, the scanty information that I have on the network adapter, indicates that it is built into the motherboard.

    Again, I thank you for your help.
      My System SpecsSystem Spec


 

Related Threads
I tried F12 when booting up PC and got a screen called Boot Menu. C drive has a plus sign beside it. I used the arrow to go down to CD rom and hit enter. When I tried to boot from the CD disk, it still booted into Windows, and when I used F12...
So after trying to share files in my network I created a Homegroup with my other Windows 10 computer - where the Internet works fine. The problem computer is just a media center designed to run Kodi. I had no user account yet. So I created a...
How to Change Wireless Network Connection Priority Order in Windows 10 Windows will usually automatically connect to networks in this priority order: Ethernet Wi‑Fi (wireless) Mobile broadband (cellular) When you connect to a new wireless...
I've been running Windows 10 on my PC for a few months now. I upgraded from Windows 7 and absolutely love it! However, I am having an issue. When I use my PC on a normal basis, Everything is good. Internet connection is perfectly stable, no...
Roughly half the time I restart my PC I am told I am not connected to the internet, the Ethernet icon in the notification area shows a yellow triangle. 47709 but the thing is I am connected just fine and can access everything I normally do. Even...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 23:48.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums