Windows 10: No network connectivity

Page 1 of 2 12 LastLast
  1.    04 Feb 2016 #1

    No network connectivity


    Hi, I suffer total loss of network connectivity after a computer crash.

    I am on win 10 x64

    Here is my ipconfig /all, hopefully someone can spot what is wrong:

    C:\WINDOWS\system32>ipconfig /all


    Windows IP Configuration


    Host Name . . . . . . . . . . . . : Xello
    Primary Dns Suffix . . . . . . . :
    Node Type . . . . . . . . . . . . : Hybrid
    IP Routing Enabled. . . . . . . . : No
    WINS Proxy Enabled. . . . . . . . : No


    Ethernet adapter Ethernet:


    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Intel(R) Ethernet Connection (2) I218-V
    Physical Address. . . . . . . . . : 10-C3-7B-A1-3E-4D
    DHCP Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes
    Link-local IPv6 Address . . . . . : fe80::35c2:8a75:1fb4:66d8%9(Preferred)
    Autoconfiguration IPv4 Address. . : 169.254.102.216(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.0.0
    Default Gateway . . . . . . . . . :
    DHCPv6 IAID . . . . . . . . . . . : 185647995
    DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1D-55-A6-7B-10-C3-7B-A1-3E-4D
    DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
    fec0:0:0:ffff::2%1
    fec0:0:0:ffff::3%1
    NetBIOS over Tcpip. . . . . . . . : Enabled


    Tunnel adapter isatap.{C0C4496D-EA53-4D75-BFEF-FC6EEC652592}:


    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Microsoft ISATAP Adapter
    Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes


    C:\WINDOWS\system32>


    ​Windows troubleshooter reports that "One or more network protocols are missing on this computer".

    Some other info: i am unable to connect to 192.168.0.1, which is my router's home page. I can load this page on my laptop if i connect my laptop with ethernet, so the router is fine.
    Last edited by Xelot; 04 Feb 2016 at 11:02.
      My System SpecsSystem Spec


  2. Posts : 140
    Windows 10 Ent, Pro & Home
       04 Feb 2016 #2

    169,254... is a local IP address. Also, no Gateway, your PC is not picking up a DHCP address from your router. Check the connections to your router and restart your router.
      My System SpecsSystem Spec

  3.    04 Feb 2016 #3

    Hi, I've been trying to sort this for around 4 hours now without success, but in that time i have restarted computer, reset router, and reset cables several times. I have even verified the lan ports on the router by using them with other systems.

    My ipconfig /all has changed slightly, here it is now:

    C:\WINDOWS\system32>ipconfig /all

    Windows IP Configuration

    Host Name . . . . . . . . . . . . : Xello
    Primary Dns Suffix . . . . . . . :
    Node Type . . . . . . . . . . . . : Hybrid
    IP Routing Enabled. . . . . . . . : No
    WINS Proxy Enabled. . . . . . . . : No

    Ethernet adapter Ethernet:

    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Intel(R) Ethernet Connection (2) I218-V
    Physical Address. . . . . . . . . : 10-C3-7B-A1-3E-4D
    DHCP Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes
    Link-local IPv6 Address . . . . . : fe80::e5b5:ce37:9c32:968f%5(Preferred)
    IPv4 Address. . . . . . . . . . . : 192.168.0.2(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Lease Obtained. . . . . . . . . . : 04 February 2016 17:05:05
    Lease Expires . . . . . . . . . . : 05 February 2016 17:05:05
    Default Gateway . . . . . . . . . : 192.168.0.1
    DHCP Server . . . . . . . . . . . : 192.168.0.1
    DHCPv6 IAID . . . . . . . . . . . : 84984699
    DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1D-55-A6-7B-10-C3-7B-A1-3E-4D
    DNS Servers . . . . . . . . . . . : 192.168.0.1
    NetBIOS over Tcpip. . . . . . . . : Enabled

    Tunnel adapter isatap.{56956E17-939B-4ACD-B337-D033B72081D1}:

    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Microsoft ISATAP Adapter
    Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes

    C:\WINDOWS\system32>

    I have even performed a system restore to 2 weeks ago and the issue remains.

    Another issue is that when doing ipconfig release and renew, I get this error when trying to renew (after hanging for a few mins):

    Windows IP Configuration

    An error occurred while renewing interface Ethernet : unable to contact your DHCP server. Request has timed out.

    It's after trying the release + renew that my ipconfig /all gives the result in my first post.

    Other commands I have tried are netsh winsock reset and netsh int ip reset.

    I have also uninstalled my NIC in device manager and rebooted, using the default windows 10 driver for my NIC.

    I have also uninstalled the NIC then tried using the latest driver for it from motherboard website.
    Last edited by Xelot; 04 Feb 2016 at 12:37.
      My System SpecsSystem Spec

  4. sml156's Avatar
    Posts : 379
    Microsoft Windows 10 Pro 32-bit 10586
       04 Feb 2016 #4

    I would set your adapter to a static IP
    Open Network connections
    Press the Windows Key + r
    Copy and paste this
    Code:
    ncpa.cpl
    Right click on your adapter and select properties
    Double click on Internet Protocol version 4 (TCP/IPv4)
    Change your settings to
    IP: 192.168.0.99
    Subnet: 255.255.255.0
    Default Gateway: 192.168.0.1

    Use the following DNS server
    8.8.8.8
    8.8.4.4

    Click image for larger version. 

Name:	NETWORK ADAPTER 1-1 text.png 
Views:	29 
Size:	6.7 KB 
ID:	62414

    Try using Googles DNS server
    I live in Ontario Canada and I find that Googles DNS server works great here. You could also use your ISP's DNS server, To find that you will have to do a Google search for it.
    Code:
    8.8.8.8
    8.8.4.4
    Make sure your DHCP Client service is running...
    Startup the Services window (Windows Key + r "services.msc"), then look for a line labeled "DHCP Client". Make sure that the Status column shows "Started" and the Startup Type column is "Automatic".

    While your there check these ones too

    Code:
    Computer Browser
    DHCP Client
    DNS Client
    Network Connections
    Network Location Awareness
    Remote Procedure Call (RPC)
    Server
    TCP/IP Netbios helper
    Workstation
    Some general command line tips for trying to fix network problems
    Go to command Prompt (Admin)

    Reset WINSOCK entries to installation defaults:
    Code:
     netsh winsock reset catalog
    and after that
    Reset IPv4 TCP/IP stack to installation defaults.
    Code:
    netsh int ipv4 reset 
    And last but hopefully last
    Reset IPv6 TCP/IP stack to installation defaults
    Code:
    netsh int ipv6 reset
    Note   Note
    After a reboot and you still have no connection check this ---if you have a static IP check your internet protocol (TCP/IPv4). They may have changed to 0.0.0.0

    Reboot the machine.
    Last edited by sml156; 01 Nov 2016 at 01:55. Reason: Beacuse I can
      My System SpecsSystem Spec

  5.    04 Feb 2016 #5

    thanks for the suggestions,

    have run through them all with no success.
    All the listed services had status 'Running', and all Automatic (with some being automatic: triggered start and things like that)

    I also put in the static ip settings again after reboot, with no success. They are taking effect, they show in the "details" window of the connection status window, I just still have no data throughput.

    The netsh commands are ones I already did try, but I tried again. Some of the 'resetting' statements fail.
    However, I have now tried running those commands on my laptop (which has no issues) and they also have some failures there, so I don't think that is indicative of the issue.
      My System SpecsSystem Spec

  6. sml156's Avatar
    Posts : 379
    Microsoft Windows 10 Pro 32-bit 10586
       04 Feb 2016 #6

    I would check your network cable and if possible switch the cable from a working computer to the non working one, I guess you already tried rebooting the router.

    Try to ping the router
    Code:
    ping 192.168.0.1
      My System SpecsSystem Spec

  7.    04 Feb 2016 #7

    Yeah i have tried spare cables and pinging the router results in time outs.

    I may be on to something, I noticed in my uninstall programs list i have "Intel(R) Technology Access" which was apparently installed today, I don't know what it is, but googling it makes me think it is probably causing this issue.

    When I try to uninstall it, the uninstall fails with "The set up program ended prematurely because of the following error:
    Fatal error during installation.

    click here to open log file location."

    I'm not sure if it would have been part of the driver installations I have run several times while troubleshooting, but either way the fact that I can't uninstall it is troubling. I actually have 3 instances of Intel(R) Technology Access in my programs list, all different versions.
      My System SpecsSystem Spec

  8.    04 Feb 2016 #8

    I just thought, I can have windows reinstalled and up to my desired state in around 2 hours, but I have spent over 7 hours trying to fix this, so it's time to cut the losses and reinstall.

    Thanks for suggestions.
      My System SpecsSystem Spec

  9.    04 Feb 2016 #9

    Did a fresh install of windows 10 and the issue remains, how is this even possible ?

    "One or more network protocols are missing on this computer" - on a brand new installation? i don't think so...
      My System SpecsSystem Spec

  10.    04 Feb 2016 #10

    Xelot said: View Post
    Did a fresh install of windows 10 and the issue remains, how is this even possible ?

    "One or more network protocols are missing on this computer" - on a brand new installation? i don't think so...
    I'm battling the same issue. I think that the missing protocols issues has to do with missing winsock entries in the registry. I got past that by following the instructions here:
    Network Protocols Missing

    Essentially, the fix to the protocols error is to copy the winsock entries from a working machine.

    I also note that your IP subnet mask is 255.255.0.0. I have the same issue. It's my understanding that it should be 255.255.255.0 for a typical home setup and that is must match the subnet mask used by your router. I don't know how to change the default subnet mask on my machine. Manually setting an IP address did not work. My wife's laptop and my router both use 255.255.255.0 as the subnet mask.

    Take all this with a grain of salt. I know very little about the ins and outs of networking, apart from what I've picked up here while trying to get my computer back on line.

    I hope that helps or gets a knowledgeable person on the right track.

    on edit: I see from your third post that your subnet mask changed to 255.255.255.0, which should be OK.
    Last edited by BobsYourUncle; 04 Feb 2016 at 20:06. Reason: correction re subnet mask
      My System SpecsSystem Spec


 
Page 1 of 2 12 LastLast

Related Threads
Solved IPv6 Connectivity: No network access in Network and Sharing
I'm not that computer savvy and I've been going through forums but nothing is working to get my computer to connect to the internet again. It was working fine yesterday so I have no idea what changed. All other devices can connect. Using my laptop...
I just upgraded from windows 7 to windows 10 now the machine refuses to show the network adapters! Both adapters show in the device manager as running OK. I have tried to reinstall the drivers - win 10 says the latest driver is installed. I tried...
Update Aug 15th: The network issues have been resolved by modifying SMB2 settings in the registry, as per my posts on page 2. Now, just a persistent HomeGroup error remains. ------------ Ok, first off, a quick run-down on my setup - the "core" of...
safe mode no network connectivity in Network and Sharing
I tried to upgrade to Windows 10 from Windows 7 64x and it crashes immediately once the desktop comes up. I get the SYSTEM THREAD EXCEPTION NOT HANDLED error which I have yet to find a fix for that works. I assume it is my graphics card driver so I...
Hi there I've created a SIMPLE TEST network of 3 computers - on computer GYLFI is a stand alone (Real) Linux server, on another REAL machine is a computer BLACKDOG running Windows 8.1 and on this machine is a VIRTUAL machine WHITEHORSE running...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 21:17.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums