Page 1 of 10 123 ... LastLast

  1. Joined : Jan 2016
    Posts : 10
    Windows 10
       04 Jan 2016 #1

    One or more network protocols are missing, solution


    Hello, I just had this very annoying issue for a while, and scouring the internet proved to no avail. However, I stumbled upon the solution by myself. Simply go into an elevated command prompt and enter netsh int ipv4 install and restart your computer.

    This is what solved the problem for me, though I had already tried a few suggestions (resetting winsock, giving permissions in NSI, etc) so that might have something to do with it. If moderators are displeased with me making a new thread about it, the please move it to where it should be.

    Best of luck.
      My System SpecsSystem Spec


  2. Joined : Jan 2016
    Posts : 1
    Windows 10
       04 Jan 2016 #2

    OMG... THANK YOU, THANK YOU, THANK YOU!!!!!
    Your solution is easy and brilliant. This has been driving a lot of people crazy. Thank you so much!!
      My System SpecsSystem Spec


  3. Joined : Jan 2016
    Posts : 1
    Windows 10
       05 Jan 2016 #3

    I've been troubled by this as well. Disabling IPv6 on the network card properties seemed to solve it permanently (and without any of the other fixes suggested.) Kind of makes sense since the computers that I was trying to connect to were not IPv6 enabled.
      My System SpecsSystem Spec


  4. Joined : Jan 2016
    Posts : 147
    Windows 10
       05 Jan 2016 #4

    Random solutions for one problem, varies from one system to another. Good to know there's a solution that might help.
      My System SpecsSystem Spec


  5. Joined : Jan 2016
    Posts : 10
    Windows 10
       05 Jan 2016 #5

    Private said: View Post
    Random solutions for one problem, varies from one system to another. Good to know there's a solution that might help.
    I doubt it. If the same problem happens on multiple systems, the only common ground being the same OS build, its highly likely that the problems share the same source. The fact that there are different solutions to similar problems does not invalidate that.
      My System SpecsSystem Spec


  6. Joined : May 2015
    Posts : 4
    win 10 tp
       06 Jan 2016 #6

    Yeah! I didn't see a "thumbs up" or a "kudos" so here you are . . .


    [QUOTE=efta;523004]Hello, I just had this very annoying issue for a while, and scouring the internet proved to no avail. However, I stumbled upon the solution by myself. Simply go into an elevated command prompt and enter netsh int ipv4 install and restart your computer.
      My System SpecsSystem Spec


  7. Joined : Jan 2016
    Posts : 10
    Windows 10
       09 Jan 2016 #7

    Bumping the thread. Please reply to it if it works (or not), both so that others can see it and to gauge whether this is an actual solution or just coincidence.
      My System SpecsSystem Spec


  8. Joined : Jan 2016
    Posts : 1
    Win 10 x64
       09 Jan 2016 #8

    efta said: View Post
    Hello, I just had this very annoying issue for a while, and scouring the internet proved to no avail. However, I stumbled upon the solution by myself. Simply go into an elevated command prompt and enter netsh int ipv4 install and restart your computer.

    This is what solved the problem for me, though I had already tried a few suggestions (resetting winsock, giving permissions in NSI, etc) so that might have something to do with it. If moderators are displeased with me making a new thread about it, the please move it to where it should be.

    Best of luck.
    I just registered an account so I could say bless you, sir. You are a gentleman and a scholar.
      My System SpecsSystem Spec


  9. Joined : Jan 2016
    Posts : 3
    upgraded windows 10
       15 Jan 2016 #9

    [QUOTE=vmd;524647]
    efta said: View Post
    Hello, I just had this very annoying issue for a while, and scouring the internet proved to no avail. However, I stumbled upon the solution by myself. Simply go into an elevated command prompt and enter netsh int ipv4 install and restart your computer.
    Hi all, this hasnt worked for me

    Through the night , i received an update and it seems to have knackered my pc, same recorded problem as others, I have been through different things with microsoft engineer on telephone, then they wanted 100 to go any further, so I had to stop, any help please , I have so much work to do
      My System SpecsSystem Spec


  10. Joined : Jan 2016
    Posts : 3
    upgraded windows 10
       15 Jan 2016 #10

    Can anyone suggest anything else, I really do not want to take my PC to a shop to be fixed
      My System SpecsSystem Spec


 
Page 1 of 10 123 ... LastLast


Similar Threads
Thread Forum
Network Protocols Missing
Noted immediately after 1511 total system update, yet may have been inherited from an earlier build... All is working well, yet Network Troubleshooter reports "one or more network protocols is missing." Various posted remedies have been verified...
Network and Sharing
One or more network protocols are missing from this computer error
I have w10, running a static ip address through time warner cable in Ohio. Time warner said they had a problem on their end, ever since then I can't connect to our security cameras. I run a powerline from the house to the office., have reset my...
Network and Sharing
"one or more network protocols are missing on this computer"
This happened after the latest major update. I've tried the following steps with no success 1) sfc /scannow. This showed no errors 2) netsh advfirewall reset netsh int ip reset*** netsh int ipv6 reset netsh int ipv4 reset netsh winsock reset...
Network and Sharing
Problem with One or More Network Protocols Missing
What would cause my computer to have one or more network protocols missing and how can I fix it? Below is the screenshot of the troubleshooting report. 56521
Network and Sharing
W10 INCOMING connections - missing network protocols
Hi there It seems that for earlier computers such as XP / W7 or even Linux machines connecting TO a W10 machine causes problems unless you connect via an IP address. Even if you apply the "Fix automatically" it still doesn't work and if you...
Network and Sharing
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:47.
Find Us
Twitter Facebook Google+



Windows 10 Forums