Page 3 of 10 FirstFirst 12345 ... LastLast

  1. Joined : Jan 2016
    Posts : 4
    windows 10
       25 Jan 2016 #21

    BobsYourUncle said: View Post
    Thanks Aurthur. I tried that and it didn't change anything. The SFC scan showed no errors.
    its always tough to know what actually was the solution, since most of us try a few different things, and then focus on the last thing tried as "the solution"(the fallacy of the straw that breaks the camels back).

    I'm reluctant to suggest registry fixes, since they are risky, but in my case I also deleted my winsock entries,

    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock2

    [FIX] Windows Sockets Registry Entries Required For Network Connectivity Are Missing

    I then used a winsock reset utility on majorgeeks. The utility claims to apply

    Works with XP, Vista, 7, and 8 and is fully portable!

    per the author(Winsock Reset 1.2)

    WinsockReset Foolish IT

    so its a risk for W10, but I did it, and survived to tell this story. The error no longer occurs on my machine.

    I ran the sequence of commands suggested earlier, but after I did this winsock reset.

    I'm an older guy and make no claims to understanding any of this. I bought my first PC around 1984(10mb HDD and the ubiquitous 640k DOS) and been hacking my way through MS voodoo ever since.
      My System SpecsSystem Spec


  2. Joined : Dec 2015
    Posts : 55
    Windows 10
       27 Jan 2016 #22

    Why would this problem occur suddenly?
      My System SpecsSystem Spec


  3. Joined : Mar 2015
    Posts : 59
    Windows 10
       27 Jan 2016 #23

    Just thought I'd share my experience today:

    Installed Windows 10 on a couple Dell optiplex 380's that were running Windows 7. I began the install within Windows using the latest ISO. Selected to install but not keep anything. Both had the missing protocol crap on first boot. I tried importing the winsock registry entries from a Windows 7 machine, uninstalled network adapter, reset winsock and rebooted. It didn't work. Tried in-place upgrade. That didn't work either.

    This isn't a fix, but I gave both PC's static IPs and they connected to the Internet immediately. Switched back to defaults and no internet again. Fully updated with today's cumulative update and that didn't fix anything.

    I'm going to try the solution in the first post of this thread tomorrow. Just wanted to offer this workaround for others.

    * "netsh int ipv4 install" command didn't resolve issue. *
    Last edited by vram; 28 Jan 2016 at 14:17. Reason: Updated info
      My System SpecsSystem Spec


  4. Joined : Jan 2016
    Posts : 16
    Windows 10
       28 Jan 2016 #24

    FMTraylor said: View Post
    I'm not an expert, so don't know what "elevated command prompt" is. Is that command prompt as an administrator?
    Yes, needs to run as admin.Right click on the Windows logo icon on the left end of your task bar, select "Command Prompt (Admin)".
      My System SpecsSystem Spec


  5. Joined : Jan 2016
    Posts : 1
    Windows 10
       28 Jan 2016 #25

    efta said: View Post
    Hello, I just had this very annoying issue for a while, and scouring the internet proved to no avail. However, I stumbled upon the solution by myself. Simply go into an elevated command prompt and enter netsh int ipv4 install and restart your computer.

    This is what solved the problem for me, though I had already tried a few suggestions (resetting winsock, giving permissions in NSI, etc) so that might have something to do with it. If moderators are displeased with me making a new thread about it, the please move it to where it should be.

    Best of luck.

    This is my only post here and it is to thank you. So, thank you, sir.
    I would like to point out that this problem started when I updated my Windows today.
    I would also like to show how to get to elevated command prompt by linking the following: Elevated Command Prompt - Open in Windows 10 - Windows 10 Forums
    Finally, I would like to say that after typing netsh int ipv4 install in the elevated command prompt you must restart not shutdown or sign out the computer.
      My System SpecsSystem Spec


  6. Joined : Jan 2016
    Posts : 4
    Windows 10
       31 Jan 2016 #26

    I also just experienced this problem today. I tried the 'netsh int ipv4 install'command but that did not help. Can anyone provide a solution which is not too technically advanced, since I am just a normal PC user, not a techo.
      My System SpecsSystem Spec


  7. Joined : Jan 2016
    Posts : 1
    Windows 10
       31 Jan 2016 #27

    Yesterday I buy new Toshiba i3. I turned on and setup this first time after that when I try to connect wifi. It shows "unidentified network no Internet connection". I try to troubleshoot but it shows "one or more network protocols are missing on this computer". I try all these above solutions but not work.. But last night during windows troubleshooting it's automatically start working. But now In morning again same problem.
    Click image for larger version. 

Name:	IMG_20160131_091930.jpg 
Views:	10 
Size:	1.36 MB 
ID:	61725Click image for larger version. 

Name:	IMG_20160131_091930.jpg 
Views:	10 
Size:	1.36 MB 
ID:	61725Click image for larger version. 

Name:	IMG_20160131_091930.jpg 
Views:	10 
Size:	1.36 MB 
ID:	61725
      My System SpecsSystem Spec


  8. Joined : Feb 2016
    Posts : 1
    Dos
       08 Feb 2016 #28

    Experienced this missing protocol problem for a long time and was able to get around it until today but today was a particular annoyance, so when I tried this command line and it worked first time I had to register and say thank you .Skeeter
      My System SpecsSystem Spec


  9. Joined : Feb 2016
    Posts : 1
    Windows 10
       09 Feb 2016 #29

    Just wanted to say THANK YOU! This worked for me ...

    efta said: View Post
    Hello, I just had this very annoying issue for a while, and scouring the internet proved to no avail. However, I stumbled upon the solution by myself. Simply go into an elevated command prompt and enter netsh int ipv4 install and restart your computer.

    This is what solved the problem for me, though I had already tried a few suggestions (resetting winsock, giving permissions in NSI, etc) so that might have something to do with it. If moderators are displeased with me making a new thread about it, the please move it to where it should be.

    Best of luck.
      My System SpecsSystem Spec


  10. Joined : Feb 2016
    Posts : 1
    windows 10
       09 Feb 2016 #30

    did not work for me also.... restarted pc as prompted and still no fix
      My System SpecsSystem Spec


 
Page 3 of 10 FirstFirst 12345 ... LastLast


Similar Threads
Thread Forum
Network Protocols Missing
Noted immediately after 1511 total system update, yet may have been inherited from an earlier build... All is working well, yet Network Troubleshooter reports "one or more network protocols is missing." Various posted remedies have been verified...
Network and Sharing
One or more network protocols are missing from this computer error
I have w10, running a static ip address through time warner cable in Ohio. Time warner said they had a problem on their end, ever since then I can't connect to our security cameras. I run a powerline from the house to the office., have reset my...
Network and Sharing
"one or more network protocols are missing on this computer"
This happened after the latest major update. I've tried the following steps with no success 1) sfc /scannow. This showed no errors 2) netsh advfirewall reset netsh int ip reset*** netsh int ipv6 reset netsh int ipv4 reset netsh winsock reset...
Network and Sharing
Problem with One or More Network Protocols Missing
What would cause my computer to have one or more network protocols missing and how can I fix it? Below is the screenshot of the troubleshooting report. 56521
Network and Sharing
W10 INCOMING connections - missing network protocols
Hi there It seems that for earlier computers such as XP / W7 or even Linux machines connecting TO a W10 machine causes problems unless you connect via an IP address. Even if you apply the "Fix automatically" it still doesn't work and if you...
Network and Sharing
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:07.
Find Us
Twitter Facebook Google+



Windows 10 Forums