Page 9 of 27 FirstFirst ... 789101119 ... LastLast
  1.    18 Jan 2016 #81
    Join Date : Jan 2016
    Posts : 1
    Windows 7 & 10

    Fixed


    Quote Originally Posted by edenlincoln View Post
    I have successfully fixed my Issue with the Missing protocols when upgrading Windows 7 to Windows 10 ENTERPRISE.

    I am facing those issues ONLY with one type of hardware on my company. DELL Precision T1700 with SSD disks.
    I have other Older models from DELL as well as from LENOVO, upgrade works just fine with them. Issue happens only with DELL Precision T1700.

    My Solution was:

    1)Go to a healthy windows 7 and export (WinSock and WinSock2) Keys to a flashdrive (USB), you will need them to import to the Broken windows 10 machine

    Those are the keys:
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock

    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock2




    2) ON the Windows 10, Uninstall Current Network driver from Device Manager (devmgmt.msc). In addition to that, uninstall as well as any other warning mesage you might have.


    • 3) Click Start, and then click Run.
    • In the Open box, type regedit, and then click OK.
    • In Registry Editor, locate the following keys, right-click each key, export them just in case you need to re-import them. Once you have exported them, go ahead and click Delete the two folder keys:HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock

      HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock2

      4) Reboot the computer

      5) Go back to regedit (registry) and import the two Keys you exported from a Windows 7. Go to the same path in order to import them to the right place:
      PS: ** You might see that the WinSock2 got back to the registry, just redeleted it and then continue with the import of the two keys.
      HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock

      HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock2

    5) Open CMD as Administrator and run the command: netsh winsock reset.
    6) Reboot the computer

    Once computer comes back up online, you will see that your network is back up again.

    Hope that helps you.

    ---
    Many thanks, eden.
    I have had internet issues for several days - the same constant message about missing protocols. At first I thought it was my ISP, and then I blamed my router. Reset after reset, updating drivers and reinstalling, and the same problem occurred. I have almost been pulling hair trying to resolve the issue until I scrolled through this thread and found your solution. It worked like a charm and I had no problems following your instructions.
    Luckily my fiancee's laptop is Windows 7, so I could breath a sigh of relief. He is extremely happy that I've found a fix all on my own!! LOL. It definitely feels good to fix something by ones self. Obviously with a little help

    I'm not getting my hopes up just yet though, as previously I had reset the router to factory default and I would have internet for a short while and then it would break again.
    I'm keeping my fingers crossed that this reg fix is permanent.

    I have also copied and pasted your solution into wordpad just in case this issue happens to arise in the future, or if anyone else has similar issues.

    Thank you, thank you, thank you.

    PS. I made an account here just to thank you!
      My ComputerSystem Spec
  2.    21 Jan 2016 #82
    Join Date : Jan 2016
    Posts : 1
    Windows 10

    I just encountered this issue in the last hour after installing VirtualBox. I thought that may have had something to do with it, since it had added protocols for virtualization. I ran through a couple of the threads to see what types of issues other people have had. I didn't try anything that any of the other users had posted but I did notice a few posts about firewall configurations, so I went ahead and reset the windows 10 firewall settings to default, rebooted and the issues was resolved. This solution worked for me, not sure if it will for anyone else but I hope that it may be of some help to someone.
      My ComputerSystem Spec
  3.    22 Jan 2016 #83
    Join Date : Aug 2015
    Posts : 11
    Windows 10

    Networking is verry 'buggy' with Windows 10. I have this same annoying problem. I have four windows 10 PCs on a homegroup network. The only AV installed or running is Windows Defender. When I attempt to backup files between these PCs, I have trouble with access, despite all being set up on the homegroup. I get the same errors mentioned by previous posters. Interestingly, after I run the diagnostics and get the message that one or more network protocols are missing and the problem is not fixed, I then exit the diagnostic screen. After that, I can access the files. This is a ridiculous process to go through each time I want to sync files between PCs. I never had this trouble when using the homegroup network protocol in Windows 7.
      My ComputerSystem Spec
  4.    26 Jan 2016 #84
    Join Date : Jan 2016
    Posts : 4
    Windows 10

    I also have this issue for a week. And today, I have fix this problem. Here is how I fix this issue.
    1. Go to Registry Editor (Press Start and R button, and then type "regedit" without quotation mark, click OK or hit Enter).
    2. In the Registry Editor, go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\
    3. Find Winsock, and create backup of it. To do the backup, right click on Winsock, and select Export. Give a name (e.g. Winsock.reg or whatever you want).
    4. Find Winsock2, and do the backup of Winsock2 like point 3.
    5. Now, delete Winsock and Winsock2. To do this, right click on Winsock or Winsock2, then select Delete.
    6. Restart the PC.
    7. Now, just import Winsock and Winsock2 from the backup file before.
    8. Restart the PC and Done. The network issue is fixed.

    Hope this can help anyone who get this issue.
    Last edited by fefaz; 30 Jan 2016 at 10:09. Reason: Some text must be strong
      My ComputerSystem Spec
  5.    26 Jan 2016 #85
    Join Date : Dec 2015
    Salvador, Bahia, Brasil
    Posts : 21
    Windows 10 (10240), Windows 10 (1511)

    fefaz, I want to try your fix. But could you add the instructions to UNDO (in case of something dont work)?
      My ComputerSystem Spec
  6.    26 Jan 2016 #86
    Join Date : Aug 2015
    Posts : 11
    Windows 10

    I'm posting this as a rant, more than anything else. My new Win10 Pro HP laptop has been plagued with a series of these network connectivity issues. They seem to crop up after every other update. My angst is that I recall spending hours setting up network protocols way back in the days of Windows 3.1 and other early versions. I was very competent with DOS commands and network protocols. By the time Windows 7 came along, having to tinker with networks and other machine settings was a distant memory - as it should be. Now, here I am again, spending hours correcting network bugs. I've always been an IOS hater. Suddenly, iPads aren't looking so pad. Ain't progress great!!
      My ComputerSystem Spec
  7.    30 Jan 2016 #87
    Join Date : Jan 2016
    Posts : 4
    Windows 10

    Quote Originally Posted by persiomenezes View Post
    fefaz, I want to try your fix. But could you add the instructions to UNDO (in case of something dont work)?
    Do a backup by exporting registry key of Winsock and Winsock 2. So, if something doesn't work, you can revert back by importing those backup.
      My ComputerSystem Spec
  8.    01 Feb 2016 #88
    Join Date : Aug 2015
    Posts : 4
    10

    Thank You - FIXED - one or more network protocols missing


    [QUOTE=SimBy;486386]My problem is not the same as OP since I can connect to internet just fine, but since it's related to Treshold 2 update and networking I'll post this here anyway.

    Thanks for the fix. As with OP, I could not connect to internet on desktop (lapper was fine). Last Windows update was January 29, 2016. Rec'd the 'one or more network protocols are missing' msg. Details pointed to sockets. Checked ipv4 settings and ipv6 settings; somehow the settings for automatically obtain ip and nameservers became unchecked. Enabled both and back in business ... although 2 hours late for work. Thanks for the detailed screengrabs and troubleshooting/source comments. Please enjoy a cake: and a high 5!
      My ComputerSystem Spec
  9.    01 Feb 2016 #89
    Join Date : Aug 2015
    Posts : 4
    10

    [QUOTE=SimBy;486386]My problem is not the same as OP since I can connect to internet just fine, but since it's related to Treshold 2 update and networking I'll post this here anyway.

    Thanks for the fix. As with OP, I could not connect to internet on desktop (lapper was fine). Last Windows update was January 29, 2016. Rec'd the 'one or more network protocols are missing' msg. Details pointed to sockets. Checked ipv4 settings and ipv6 settings; somehow the settings for automatically obtain ip and nameservers became unchecked. Enabled both and back in business ... although 2 hours late for work. Thanks for the detailed screengrabs and troubleshooting/source comments. Please enjoy a cake: and a high 5!
      My ComputerSystem Spec
  10.    05 Feb 2016 #90
    Join Date : Feb 2016
    Posts : 1
    Windows 10 POS

    Thank you!


    Quote Originally Posted by JW0914 View Post
    The issue is not caused by NetBIOS over TCP/IP being enabled, disabled, or set to default; the issue is caused by a permissions issue, which should be obvious from the error that's received. For some reason, Windows believes a specific group policy has been enabled even though it hasn't; the most likely cause of the issue resides within the registry.

    NetBIOS over TCP/IP should be disabled unless your PC connects to a corporate network, or you have set up your home network in such a way that it needs to be enabled. When NetBIOS over TCP/IP is enabled, it sends out UDP packets continuously to WAN. To disable NetBIOS:

    1. Control Panel - Network and Internet - Network Connections
    2. Right click the adapter and select Properties
    3. Highlight IP v4 (TCP/IP) and select Properties
    4. Select Advanced
    5. Select WINS tab, tick Disable, and select OK all the way out
    You saved the day (and the rest of what little hair I had left). I tried about 10 different fixes and nothing was working. THIS was the solution... after 3 hours of wasted time! Thank you so much!!
      My ComputerSystem Spec

 
Page 9 of 27 FirstFirst ... 789101119 ... LastLast


Similar Threads
Thread Forum
Solved No URL protocols work (http, steam, ms-settings, ...) - "OS can't run"
EDIT: Solved! The second error message I found (about missing ordinal #581 in ieframe.dll) was the clue I needed. The problem happened because I had IE Dev Preview installed. It's an App-V package and it can be easily uninstalled by running these...
Performance & Maintenance
WiFi Windows 10 upgrade after making 2 (Network adapter), the network
28883 My pc wifi 2 adapter network no screnn :(
Network and Sharing
Casting video from Windows 10: what protocols?
Hi, I understand the new media player in Windows 10 will cast to a media center such as an Nexus Player or Amazon Fire TV, much like Airplay, but will access local media. Is this a Google Cast (Chrome cast), Miracast, DNLA or some other...
General Support
No longer see Network Attached Storage in Network View on Build 10049
I can no longer see my Network Attached Storage in this build(10049) Enterprise. I have Network Discovery enabled and can get to the device by IP Address in a browser but am unable to map a drive to any share. Anyone else having these issues. I have...
Network and Sharing
W10 INCOMING connections - missing network protocols
Hi there It seems that for earlier computers such as XP / W7 or even Linux machines connecting TO a W10 machine causes problems unless you connect via an IP address. Even if you apply the "Fix automatically" it still doesn't work and if you...
Network and Sharing
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 23:57.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums