Windows 10: W10 INCOMING connections - missing network protocols

Page 1 of 2 12 LastLast
  1.    11 Oct 2014 #1

    W10 INCOMING connections - missing network protocols


    Hi there

    It seems that for earlier computers such as XP / W7 or even Linux machines connecting TO a W10 machine causes problems unless you connect via an IP address.

    Even if you apply the "Fix automatically" it still doesn't work and if you re-try the INCOMING connection you've STILL got the same diagnostic. (Note this is for computers connecting TO w10 not W10 connecting TO OTHER computers that way round works in all cases).

    I've tried also netsh winsock reset but that din't fix it either.

    Cheers
    jimbo
    Attached Thumbnails Attached Thumbnails Capture.PNG  
      My ComputerSystem Spec


  2. Posts : 2,033
    Ubuntu14.04x64 MintMate17x64 Win10Prox64
       11 Oct 2014 #2

    @jimbo45
    I did have problem accessing Windows 10 from my Windows 8.1 PC/Media Player. So here's what I did to fix. If you wish, you can try. Copy/Paste and save as reg file then merge into registry.
    From Admin Command: run ipconfig /flushdns
    Reboot your PC.

    Windows Registry Editor Version 5.00

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\LanmanServer\Parameters]
    "NullSessionPipes"=hex(7):6c,00,61,00,6c,00,61,00,6c,00,61,00,00,00,00,00
    "restrictnullsessaccess"=dword:00000000
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa]
    "everyoneincludesanonymous"=dword:00000001
    "NoLmHash"=dword:00000000
      My ComputerSystem Spec

  3.    11 Oct 2014 #3

    Hi there

    No go I'm afraid --same error as before.

    cheers
    jimbo
      My ComputerSystem Spec


  4. Posts : 1,467
    W7 Ultimate SP1 (64 bit), LM 18.1 MATE (64 bit), W10IP VM, W10 Home
       11 Oct 2014 #4

    Didn't work for me either


    I tried the "LanmanServer" and "everyoneincludesanonymous" hacks that allow my media box to talk to W7.
    They didn't work.

    I noticed that the [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\LanmanServer\Parameters] key in W10 is different to the W7 one.

    When I ran the W10 "Troubleshooter" I got this message:

    Click image for larger version. 

Name:	Networking - Missing Protocols.png 
Views:	966 
Size:	14.7 KB 
ID:	6804
      My ComputerSystem Spec

  5.    11 Oct 2014 #5

    lehnerus2000 said: View Post
    I tried the "LanmanServer" and "everyoneincludesanonymous" hacks that allow my media box to talk to W7.
    They didn't work.

    I noticed that the [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\LanmanServer\Parameters] key in W10 is different to the W7 one.

    When I ran the W10 "Troubleshooter" I got this message:

    Click image for larger version. 

Name:	Networking - Missing Protocols.png 
Views:	966 
Size:	14.7 KB 
ID:	6804

    Hi there

    Even if you "Correct" via this - it still doesn't work - even after reboot of ALL computers on the LAN.

    There's definitely something in Networking on W10 that's changed.

    I tested it again with a W7 X-64 computer to double check --it can SEE the W10 computer but can't access it's shares unless as before you access it via IP address rather than Hostname. The W10 machine has no problems accessing W7 computer's shares also via HOSTNAME.

    Now Ms might not worry about access from Linux or XP but it will HAVE to do something about the W7 access. Many businesses are still on W7 and they have to sell W10 to these customers.

    So to recap - It's access TO W10 FROM W7 not the other way around which works perfectly.

    Cheers
    jimbo
      My ComputerSystem Spec


  6. Posts : 11,215
    Windows 10 Pro
       11 Oct 2014 #6

    As long as the Linux machines belong to same workgroup than Windows 10, I have no issues in connecting using computername instead of IP. Here CentOS vm connected to a shared backup drive on Windows 10 using computername:

    Click image for larger version. 

Name:	2014-10-11_20h44_34.png 
Views:	105 
Size:	934.1 KB 
ID:	6832
    Last edited by Kari; 11 Oct 2014 at 14:15.
      My ComputerSystem Spec


  7. Posts : 1,467
    W7 Ultimate SP1 (64 bit), LM 18.1 MATE (64 bit), W10IP VM, W10 Home
       11 Oct 2014 #7

    Kari said: View Post
    As long as the Linux machines belong to same workgroup than Windows 10, I have no issues in connecting using computername instead of IP. Here CentOS vm connected to a shared backup drive on Windows 10 using computername:

    Click image for larger version. 

Name:	2014-10-11_20h44_34.png 
Views:	105 
Size:	934.1 KB 
ID:	6832
    Is your W10 install "real" or virtual?
      My ComputerSystem Spec


  8. Posts : 11,215
    Windows 10 Pro
       11 Oct 2014 #8

    Real, clean install on a laptop.
      My ComputerSystem Spec


  9. Posts : 1,467
    W7 Ultimate SP1 (64 bit), LM 18.1 MATE (64 bit), W10IP VM, W10 Home
       11 Oct 2014 #9

    Working Now


    It's working now.

    My "real" LM17 can access files on W10TP VM.
    I didn't make any changes to the VM (I reversed the Registry hacks I tried).

    I must have forgot to use "smb:" when I was playing around yesterday.

    Click image for larger version. 

Name:	Networking - Access W10 from LM17.png 
Views:	153 
Size:	489.4 KB 
ID:	6848

    I like the new attachment manager on TenForums.
    Last edited by lehnerus2000; 11 Oct 2014 at 21:28.
      My ComputerSystem Spec


  10. Posts : 11,215
    Windows 10 Pro
       11 Oct 2014 #10

    Yeah SMB is important.

    I got file sharing from / to Linux (CentOS, Mint, Suse) to work simply by installing Samba and setting Linux machines to same workgroup than my Windows workgroup.
      My ComputerSystem Spec


 
Page 1 of 2 12 LastLast

Related Threads
I can no longer see my Network Attached Storage in this build(10049) Enterprise. I have Network Discovery enabled and can get to the device by IP Address in a browser but am unable to map a drive to any share. Anyone else having these issues. I have...
Solved Disable Network Connections in Network and Sharing
Finally gave up on the Realteck PCIe GBE Ethernet and decided to go with the built in Wifi (Dell Wirreless 1502). Internet speeds are up and signal is strong, even though page loading stalls every one out of three times. But this is an improvement...
Hi there I've created a SIMPLE TEST network of 3 computers - on computer GYLFI is a stand alone (Real) Linux server, on another REAL machine is a computer BLACKDOG running Windows 8.1 and on this machine is a VIRTUAL machine WHITEHORSE running...
Guys Is it possible to merge two broadband connections 2 ips into a single powerful connection? I saw this article, it says it can be done. I want combined download speed on torrents, please shed some light on it.
Dual network connections one pc in Network and Sharing
Hey all hope you had great christmas and new year. Anyway to setup two network connections one (gigabit wired)for file transfers and internet surfing/downloading and the other (wireless) for media streaming to the one modem router from the one pc?...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 04:58.
Find Us